Merge "disp: msm: config AB/IBB power when AOD mode enter/exit" (8dab90d5) · Commits · e / devices / android_kernel_fairphone_FP4

msm/dsi/dsi_panel.c

+28 −0

Original line number	Diff line number	Diff line
		@@ -3889,6 +3889,17 @@ int dsi_panel_set_lp1(struct dsi_panel *panel)
		if (!panel->panel_initialized)
		goto exit;

		/*
		* Consider LP1->LP2->LP1.
		* If the panel is already in LP mode, do not need to
		* set the regulator.
		* IBB and AB power mode would be set at the same time
		* in PMIC driver, so we only call ibb setting that is enough.
		*/
		if (dsi_panel_is_type_oled(panel) &&
		panel->power_mode != SDE_MODE_DPMS_LP2)
		dsi_pwr_panel_regulator_mode_set(&panel->power_info,
		"ibb", REGULATOR_MODE_IDLE);
		rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_LP1);
		if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_LP1 cmd, rc=%d\n",
		@@ -3933,6 +3944,13 @@ int dsi_panel_set_nolp(struct dsi_panel *panel)
		if (!panel->panel_initialized)
		goto exit;

		/*
		* Consider about LP1->LP2->NOLP.
		*/
		if (dsi_panel_is_type_oled(panel) &&
		(panel->power_mode == SDE_MODE_DPMS_LP2))
		dsi_pwr_panel_regulator_mode_set(&panel->power_info,
		"ibb", REGULATOR_MODE_NORMAL);
		rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_NOLP);
		if (rc)
		DSI_ERR("[%s] failed to send DSI_CMD_SET_NOLP cmd, rc=%d\n",
		@@ -4333,6 +4351,15 @@ int dsi_panel_disable(struct dsi_panel *panel)

		/* Avoid sending panel off commands when ESD recovery is underway */
		if (!atomic_read(&panel->esd_recovery_pending)) {
		/*
		* Need to set IBB/AB regulator mode to STANDBY,
		* if panel is going off from AOD mode.
		*/
		if (dsi_panel_is_type_oled(panel) &&
		(panel->power_mode == SDE_MODE_DPMS_LP1 \|\|
		panel->power_mode == SDE_MODE_DPMS_LP2))
		dsi_pwr_panel_regulator_mode_set(&panel->power_info,
		"ibb", REGULATOR_MODE_STANDBY);
		rc = dsi_panel_tx_cmd_set(panel, DSI_CMD_SET_OFF);
		if (rc) {
		/*
		@@ -4347,6 +4374,7 @@ int dsi_panel_disable(struct dsi_panel *panel)
		}
		}
		panel->panel_initialized = false;
		panel->power_mode = SDE_MODE_DPMS_OFF;

		mutex_unlock(&panel->panel_lock);
		return rc;

msm/dsi/dsi_pwr.c

+48 −0

Original line number	Diff line number	Diff line
		@@ -378,3 +378,51 @@ int dsi_pwr_enable_regulator(struct dsi_regulator_info *regs, bool enable)

		return rc;
		}

		/*
		* dsi_pwr_panel_regulator_mode_set()
		* set the AB/IBB regulator mode for OLED panel
		* AOD mode entry and exit
		* @regs: Pointer to set of regulators to enable or disable.
		* @reg_name: Name of panel power we want to set.
		* @retulator_mode: Regulator mode values, like:
		* REGULATOR_MODE_INVALID
		* REGULATOR_MODE_FAST
		* REGULATOR_MODE_NORMAL
		* REGULATOR_MODE_IDLE
		* REGULATOR_MODE_STANDBY
		*
		* return: error code in case of failure or 0 for success.
		*/
		int dsi_pwr_panel_regulator_mode_set(struct dsi_regulator_info *regs,
		const char *reg_name,
		int regulator_mode)
		{
		int i = 0, rc = 0;
		struct dsi_vreg *vreg;

		if (regs->count == 0)
		return -EINVAL;

		if (!regs->vregs)
		return -EINVAL;

		for (i = 0; i < regs->count; i++) {
		vreg = &regs->vregs[i];
		if (!strcmp(vreg->vreg_name, reg_name)) {
		rc = regulator_set_mode(vreg->vreg,
		regulator_mode);
		if (rc)
		DSI_ERR("Regulator %s set mode %d failed\n",
		vreg->vreg_name, rc);
		break;
		}
		}

		if (i >= regs->count) {
		DSI_ERR("Regulator %s was not found\n", reg_name);
		return -EINVAL;
		}

		return rc;
		}

msm/dsi/dsi_pwr.h

+18 −0

Original line number	Diff line number	Diff line
		@@ -85,4 +85,22 @@ int dsi_pwr_get_dt_vreg_data(struct device *dev,
		* return: error code in case of failure or 0 for success.
		*/
		int dsi_pwr_enable_regulator(struct dsi_regulator_info *regs, bool enable);

		/**
		* dsi_pwr_panel_regulator_mode_set()
		* set regulator mode for OLED panel
		* @regs: Pointer to set of regulators to enable or disable.
		* @reg_name: Panel regulator name
		* @regulator_mode: Regulator mode values, like:
		* REGULATOR_MODE_INVALID
		* REGULATOR_MODE_FAST
		* REGULATOR_MODE_NORMAL
		* REGULATOR_MODE_IDLE
		* REGULATOR_MODE_STANDBY
		*
		* return: error code in case of failure or 0 for success.
		*/
		int dsi_pwr_panel_regulator_mode_set(struct dsi_regulator_info *regs,
		const char *reg_name,
		int regulator_mode);
		#endif /* _DSI_PWR_H_ */