Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 8d12ded3 authored by Ingo Molnar's avatar Ingo Molnar
Browse files

Merge branch 'perf/urgent' into perf/core, before applying dependent patches 



Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
parents d499c106 68ab7476

CREDITS

+7 −0
Original line number Diff line number Diff line
@@ -3709,6 +3709,13 @@ N: Dirk Verworner 
D: Co-author of German book ``Linux-Kernel-Programmierung''

D: Co-founder of Berlin Linux User Group



N: Andrew Victor

E: linux@maxim.org.za

W: http://maxim.org.za/at91_26.html

D: First maintainer of Atmel ARM-based SoC, aka AT91

D: Introduced support for at91rm9200, the first chip of AT91 family

S: South Africa



N: Riku Voipio

E: riku.voipio@iki.fi

D: Author of PCA9532 LED and Fintek f75375s hwmon driver

Documentation/devicetree/bindings/arm/omap/l3-noc.txt

+1 −0
Original line number Diff line number Diff line
@@ -6,6 +6,7 @@ provided by Arteris. 
Required properties:

- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family

               Should be "ti,omap4-l3-noc" for OMAP4 family

               Should be "ti,omap5-l3-noc" for OMAP5 family

	       Should be "ti,dra7-l3-noc" for DRA7 family

               Should be "ti,am4372-l3-noc" for AM43 family

- reg:	Contains L3 register address range for each noc domain.

Documentation/devicetree/bindings/clock/silabs,si5351.txt

+3 −1
Original line number Diff line number Diff line
@@ -17,7 +17,8 @@ Required properties: 
- #clock-cells: from common clock binding; shall be set to 1.

- clocks: from common clock binding; list of parent clock

  handles, shall be xtal reference clock or xtal and clkin for

  si5351c only.

  si5351c only. Corresponding clock input names are "xtal" and

  "clkin" respectively.

- #address-cells: shall be set to 1.

- #size-cells: shall be set to 0.
@@ -71,6 +72,7 @@ i2c-master-node { 


		/* connect xtal input to 25MHz reference */

		clocks = <&ref25>;

		clock-names = "xtal";



		/* connect xtal input as source of pll0 and pll1 */

		silabs,pll-source = <0 0>, <1 0>;

Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt

+1 −1
Original line number Diff line number Diff line
@@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 { 
		      80 81 68 69

		      70 71 72 73

		      74 75 76 77>;

	interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",

	interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",

			  "saif0", "saif1", "i2c0", "i2c1",

			  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",

			  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";

Documentation/devicetree/bindings/mtd/m25p80.txt→Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt

+3 −3
Original line number Diff line number Diff line
@@ -8,8 +8,8 @@ Required properties: 
               is not Linux-only, but in case of Linux, see the "m25p_ids"

               table in drivers/mtd/devices/m25p80.c for the list of supported

               chips.

               Must also include "nor-jedec" for any SPI NOR flash that can be

               identified by the JEDEC READ ID opcode (0x9F).

               Must also include "jedec,spi-nor" for any SPI NOR flash that can

               be identified by the JEDEC READ ID opcode (0x9F).

- reg : Chip-Select number

- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
@@ -25,7 +25,7 @@ Example: 
	flash: m25p80@0 {

		#address-cells = <1>;

		#size-cells = <1>;

		compatible = "spansion,m25p80", "nor-jedec";

		compatible = "spansion,m25p80", "jedec,spi-nor";

		reg = <0>;

		spi-max-frequency = <40000000>;

		m25p,fast-read;