Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 8d018621 authored by Matt Carlson's avatar Matt Carlson Committed by David S. Miller
Browse files

[TG3]: Separate requested and actual flow control parameters 



This patch removes the TX and RX flow control flags from tg3_flags and
adds two new flow control variables, flowctrl and active_flowctrl.

Signed-off-by: default avatarMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a43d8994

drivers/net/tg3.c

+36 −33
Original line number Diff line number Diff line
@@ -1602,17 +1602,19 @@ static void tg3_link_report(struct tg3 *tp) 
		       (tp->link_config.active_duplex == DUPLEX_FULL ?

			"full" : "half"));



		printk(KERN_INFO PFX "%s: Flow control is %s for TX and "

		       "%s for RX.\n",

		printk(KERN_INFO PFX

		       "%s: Flow control is %s for TX and %s for RX.\n",

		       tp->dev->name,

		       (tp->tg3_flags & TG3_FLAG_TX_PAUSE) ? "on" : "off",

		       (tp->tg3_flags & TG3_FLAG_RX_PAUSE) ? "on" : "off");

		       (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX) ?

		       "on" : "off",

		       (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX) ?

		       "on" : "off");

	}

}



static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv)

{

	u32 new_tg3_flags = 0;

	u8 new_tg3_flags = 0;

	u32 old_rx_mode = tp->rx_mode;

	u32 old_tx_mode = tp->tx_mode;
@@ -1639,31 +1641,27 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv 
		if (local_adv & ADVERTISE_PAUSE_CAP) {

			if (local_adv & ADVERTISE_PAUSE_ASYM) {

				if (remote_adv & LPA_PAUSE_CAP)

					new_tg3_flags |=

						(TG3_FLAG_RX_PAUSE |

					 	TG3_FLAG_TX_PAUSE);

					new_tg3_flags = TG3_FLOW_CTRL_RX |

							TG3_FLOW_CTRL_TX;

				else if (remote_adv & LPA_PAUSE_ASYM)

					new_tg3_flags |=

						(TG3_FLAG_RX_PAUSE);

					new_tg3_flags = TG3_FLOW_CTRL_RX;

			} else {

				if (remote_adv & LPA_PAUSE_CAP)

					new_tg3_flags |=

						(TG3_FLAG_RX_PAUSE |

					 	TG3_FLAG_TX_PAUSE);

					new_tg3_flags = TG3_FLOW_CTRL_RX |

							TG3_FLOW_CTRL_TX;

			}

		} else if (local_adv & ADVERTISE_PAUSE_ASYM) {

			if ((remote_adv & LPA_PAUSE_CAP) &&

			    (remote_adv & LPA_PAUSE_ASYM))

				new_tg3_flags |= TG3_FLAG_TX_PAUSE;

				new_tg3_flags = TG3_FLOW_CTRL_TX;

		}



		tp->tg3_flags &= ~(TG3_FLAG_RX_PAUSE | TG3_FLAG_TX_PAUSE);

		tp->tg3_flags |= new_tg3_flags;

	} else {

		new_tg3_flags = tp->tg3_flags;

		new_tg3_flags = tp->link_config.flowctrl;

	}



	if (new_tg3_flags & TG3_FLAG_RX_PAUSE)

	tp->link_config.active_flowctrl = new_tg3_flags;



	if (new_tg3_flags & TG3_FLOW_CTRL_RX)

		tp->rx_mode |= RX_MODE_FLOW_CTRL_ENABLE;

	else

		tp->rx_mode &= ~RX_MODE_FLOW_CTRL_ENABLE;
@@ -1672,7 +1670,7 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv 
		tw32_f(MAC_RX_MODE, tp->rx_mode);

	}



	if (new_tg3_flags & TG3_FLAG_TX_PAUSE)

	if (new_tg3_flags & TG3_FLOW_CTRL_TX)

		tp->tx_mode |= TX_MODE_FLOW_CTRL_ENABLE;

	else

		tp->tx_mode &= ~TX_MODE_FLOW_CTRL_ENABLE;
@@ -2812,9 +2810,7 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset) 
	int current_link_up;

	int i;



	orig_pause_cfg =

		(tp->tg3_flags & (TG3_FLAG_RX_PAUSE |

				  TG3_FLAG_TX_PAUSE));

	orig_pause_cfg = tp->link_config.active_flowctrl;

	orig_active_speed = tp->link_config.active_speed;

	orig_active_duplex = tp->link_config.active_duplex;
@@ -2903,9 +2899,7 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset) 
			netif_carrier_off(tp->dev);

		tg3_link_report(tp);

	} else {

		u32 now_pause_cfg =

			tp->tg3_flags & (TG3_FLAG_RX_PAUSE |

					 TG3_FLAG_TX_PAUSE);

		u32 now_pause_cfg = tp->link_config.active_flowctrl;

		if (orig_pause_cfg != now_pause_cfg ||

		    orig_active_speed != tp->link_config.active_speed ||

		    orig_active_duplex != tp->link_config.active_duplex)
@@ -8569,8 +8563,16 @@ static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam 
	struct tg3 *tp = netdev_priv(dev);



	epause->autoneg = (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) != 0;

	epause->rx_pause = (tp->tg3_flags & TG3_FLAG_RX_PAUSE) != 0;

	epause->tx_pause = (tp->tg3_flags & TG3_FLAG_TX_PAUSE) != 0;



	if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_RX)

		epause->rx_pause = 1;

	else

		epause->rx_pause = 0;



	if (tp->link_config.active_flowctrl & TG3_FLOW_CTRL_TX)

		epause->tx_pause = 1;

	else

		epause->tx_pause = 0;

}



static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
@@ -8590,13 +8592,13 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam 
	else

		tp->tg3_flags &= ~TG3_FLAG_PAUSE_AUTONEG;

	if (epause->rx_pause)

		tp->tg3_flags |= TG3_FLAG_RX_PAUSE;

		tp->link_config.flowctrl |= TG3_FLOW_CTRL_RX;

	else

		tp->tg3_flags &= ~TG3_FLAG_RX_PAUSE;

		tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_RX;

	if (epause->tx_pause)

		tp->tg3_flags |= TG3_FLAG_TX_PAUSE;

		tp->link_config.flowctrl |= TG3_FLOW_CTRL_TX;

	else

		tp->tg3_flags &= ~TG3_FLAG_TX_PAUSE;

		tp->link_config.flowctrl &= ~TG3_FLOW_CTRL_TX;



	if (netif_running(dev)) {

		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
@@ -12631,6 +12633,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, 


	/* flow control autonegotiation is default behavior */

	tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG;

	tp->link_config.flowctrl = TG3_FLOW_CTRL_TX | TG3_FLOW_CTRL_RX;



	tg3_init_coal(tp);

drivers/net/tg3.h

+6 −3
Original line number Diff line number Diff line
@@ -2103,13 +2103,18 @@ struct tg3_link_config { 
	u16				speed;

	u8				duplex;

	u8				autoneg;

	u8				flowctrl;

#define TG3_FLOW_CTRL_TX		0x01

#define TG3_FLOW_CTRL_RX		0x02



	/* Describes what we actually have. */

	u16				active_speed;

	u8				active_flowctrl;



	u8				active_duplex;

#define SPEED_INVALID		0xffff

#define DUPLEX_INVALID		0xff

#define AUTONEG_INVALID		0xff

	u16				active_speed;



	/* When we go in and out of low power mode we need

	 * to swap with this state.
@@ -2337,8 +2342,6 @@ struct tg3 { 
#define TG3_FLAG_EEPROM_WRITE_PROT	0x00001000

#define TG3_FLAG_NVRAM			0x00002000

#define TG3_FLAG_NVRAM_BUFFERED		0x00004000

#define TG3_FLAG_RX_PAUSE		0x00008000

#define TG3_FLAG_TX_PAUSE		0x00010000

#define TG3_FLAG_PCIX_MODE		0x00020000

#define TG3_FLAG_PCI_HIGH_SPEED		0x00040000

#define TG3_FLAG_PCI_32BIT		0x00080000