Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 8bd60711 authored by YuanCheng Cheng's avatar YuanCheng Cheng Committed by Shawn Guo
Browse files

ARM: dts: Add initial Pistachio i.mx6q board support. 

Working items:

- 800MHz CPU
- 2GB of RAM (DDR3)
- 4GB of eMMC storage
- 1T1R WiFi 2.4 GHz
- Power management support
- 1x 10/100/1000 Mbps Ethernet WAN port
- 2x USB 2.0 Host
- PCIe
- HDMI/VGA/LVDS display
- 1x UART for RS232/422/485
- 2x UART for RS232
- 1x UART for serial console
- 1x CAN bus

Specification: http://nutsboard.org/pistachio



Signed-off-by: default avatarYuanCheng Cheng <onlywig@gmail.com>
Reviewed-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 72f75bce

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -435,6 +435,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ 
	imx6q-nitrogen6_som2.dtb \

	imx6q-novena.dtb \

	imx6q-phytec-pbab01.dtb \

	imx6q-pistachio.dtb \

	imx6q-rex-pro.dtb \

	imx6q-sabreauto.dtb \

	imx6q-sabrelite.dtb \

arch/arm/boot/dts/imx6q-pistachio.dts

0 → 100644
+693 −0
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2017 NutsBoard.Org

 *

 * Author: Wig Cheng <onlywig@gmail.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>

#include "imx6q.dtsi"



/ {

	model = "NutsBoard i.MX6 Quad Pistachio board";

	compatible = "nutsboard,imx6q-pistachio", "fsl,imx6q";



	chosen {

		stdout-path = &uart4;

	};



	memory: memory {

		reg = <0x10000000 0x80000000>;

	};



	reg_3p3v: regulator-3p3v {

		compatible = "regulator-fixed";

		regulator-name = "3P3V";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

	};



	reg_1p8v: regulator-1p8v {

		compatible = "regulator-fixed";

		regulator-name = "1P8V";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

	};



	wlan_en_reg: regulator-wlan_en {

		compatible = "regulator-fixed";

		regulator-name = "wlan-en-regulator";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;

		startup-delay-us = <70000>;

		enable-active-high;

	};



	reg_usb_otg_vbus: regulator-usb_vbus {

		compatible = "regulator-fixed";

		regulator-name = "usb_otg_vbus";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;

		enable-active-high;

		vin-supply = <&swbst_reg>;

	};



	gpio-keys {

		compatible = "gpio-keys";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_gpio_keys>;



		power {

			label = "Power Button";

			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;

			gpio-key,wakeup;

			linux,code = <KEY_POWER>;

		};

	};



	sound {

		compatible = "fsl,imx-sgtl5000",

			   "fsl,imx-audio-sgtl5000";

		model = "audio-sgtl5000";

		ssi-controller = <&ssi1>;

		audio-codec = <&codec>;

		audio-routing =

			"MIC_IN", "Mic Jack",

			"Mic Jack", "Mic Bias",

			"Headphone Jack", "HP_OUT";

		mux-int-port = <1>;

		mux-ext-port = <3>;

	};



	backlight_lvds: backlight-lvds {

		compatible = "pwm-backlight";

		pwms = <&pwm1 0 50000>;

		brightness-levels = <

			0  /*1  2  3  4  5  6*/  7  8  9

			10 11 12 13 14 15 16 17 18 19

			20 21 22 23 24 25 26 27 28 29

			30 31 32 33 34 35 36 37 38 39

			40 41 42 43 44 45 46 47 48 49

			50 51 52 53 54 55 56 57 58 59

			60 61 62 63 64 65 66 67 68 69

			70 71 72 73 74 75 76 77 78 79

			80 81 82 83 84 85 86 87 88 89

			90 91 92 93 94 95 96 97 98 99

			100

		>;

		default-brightness-level = <94>;

		status = "okay";

	};



	panel {

		compatible = "hannstar,hsd100pxn1";

		backlight = <&backlight_lvds>;



		port {

			panel_in: endpoint {

				remote-endpoint = <&lvds0_out>;

			};

		};

	};

};



&audmux {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_audmux>;

	status = "okay";

};



&can2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_flexcan2>;

	status = "okay";

};



&clks {

	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,

			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;

	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,

				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;

};



&fec {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_enet>;

	phy-mode = "rgmii";

	status = "okay";

};



&hdmi {

	ddc-i2c-bus = <&i2c2>;

	status = "okay";

};



&i2c1 {

	clock-frequency = <100000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c1>;

	status = "okay";



	codec: sgtl5000@0a {

		compatible = "fsl,sgtl5000";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_i2c1_sgtl5000>;

		reg = <0x0a>;

		clocks = <&clks IMX6QDL_CLK_CKO>;

		VDDA-supply = <&reg_1p8v>;

		VDDIO-supply = <&reg_1p8v>;

	};

};



&i2c2 {

	clock-frequency = <100000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c2>;

	status = "okay";



	pmic: pfuze100@08 {

		compatible = "fsl,pfuze100";

		reg = <0x08>;



		regulators {

			sw1a_reg: sw1ab {

				regulator-min-microvolt = <300000>;

				regulator-max-microvolt = <1875000>;

				regulator-boot-on;

				regulator-always-on;

				regulator-ramp-delay = <6250>;

			};



			sw1c_reg: sw1c {

				regulator-min-microvolt = <300000>;

				regulator-max-microvolt = <1875000>;

				regulator-boot-on;

				regulator-always-on;

				regulator-ramp-delay = <6250>;

			};



			sw2_reg: sw2 {

				regulator-min-microvolt = <800000>;

				regulator-max-microvolt = <3300000>;

				regulator-boot-on;

				regulator-always-on;

				regulator-ramp-delay = <6250>;

			};



			sw3a_reg: sw3a {

				regulator-min-microvolt = <400000>;

				regulator-max-microvolt = <1975000>;

				regulator-boot-on;

				regulator-always-on;

			};



			sw3b_reg: sw3b {

				regulator-min-microvolt = <400000>;

				regulator-max-microvolt = <1975000>;

				regulator-boot-on;

				regulator-always-on;

			};



			sw4_reg: sw4 {

				regulator-min-microvolt = <800000>;

				regulator-max-microvolt = <3300000>;

			};



			swbst_reg: swbst {

				regulator-min-microvolt = <5000000>;

				regulator-max-microvolt = <5150000>;

			};



			snvs_reg: vsnvs {

				regulator-min-microvolt = <1000000>;

				regulator-max-microvolt = <3000000>;

				regulator-boot-on;

				regulator-always-on;

			};



			vref_reg: vrefddr {

				regulator-boot-on;

				regulator-always-on;

			};



			vgen1_reg: vgen1 {

				regulator-min-microvolt = <800000>;

				regulator-max-microvolt = <1550000>;

			};



			vgen2_reg: vgen2 {

				regulator-min-microvolt = <800000>;

				regulator-max-microvolt = <1550000>;

			};



			vgen3_reg: vgen3 {

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <3300000>;

			};



			vgen4_reg: vgen4 {

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

			};



			vgen5_reg: vgen5 {

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

			};

			vgen6_reg: vgen6 {

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

			};

		};

	};



	ar1021@4d {

		compatible = "microchip,ar1021-i2c";

		reg = <0x4d>;

		interrupt-parent = <&gpio6>;

		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;

	};

};



&i2c3 {

	clock-frequency = <100000>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_i2c3>;

	status = "okay";

};



&iomuxc {

	pinctrl-names = "default";



	pinctrl_hog: hoggrp {

		fsl,pins = <

			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0  /*pcie power*/

			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x1b0b0   /*LCD power*/

			MX6QDL_PAD_EIM_D16__GPIO3_IO16	0x1b0b0   /*backlight power*/

			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1 /*SD3 CD pin*/

			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0 /*codec power*/

			MX6QDL_PAD_EIM_A16__GPIO2_IO22	0x1b0b0 /*touch reset*/

			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b01 /*touch irq*/

			MX6QDL_PAD_GPIO_7__GPIO1_IO07	 0x1b0b0/*backlight pwr*/

			MX6QDL_PAD_GPIO_16__GPIO7_IO11	0x1b0b0 /*gpio 5V_1*/

			MX6QDL_PAD_EIM_A19__GPIO2_IO19	0x1b0b0 /*gpio 5V_2*/

			MX6QDL_PAD_EIM_A24__GPIO5_IO04	0x1b0b0 /*gpio 5V_3*/

			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0 /*gpio 5V_4*/

			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0 /*AUX_5V_EN*/

			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0 /*AUX_5VB_EN*/

			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0 /*AUX_3V3_EN*/

			MX6QDL_PAD_EIM_D21__GPIO3_IO21	0x1b0b0 /*I2C expander pwr*/

		>;

	};



	pinctrl_audmux: audmuxgrp {

		fsl,pins = <

			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0

			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0

			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0

			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0

		>;

	};



	pinctrl_ecspi1: ecspi1grp {

		fsl,pins = <

			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1

			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1

			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1

			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0

		>;

	};



	pinctrl_enet: enetgrp {

		fsl,pins = <

			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0

			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0

			/* AR8035 reset */

			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x130b0

			/* AR8035 interrupt */

			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1

			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030

			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030

			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030

			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030

			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030

			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030

			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */

			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1

			/* AR8035 pin strapping: IO voltage: pull up */

			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030

			/* AR8035 pin strapping: PHYADDR#0: pull down */

			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030

			/* AR8035 pin strapping: PHYADDR#1: pull down */

			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030

			/* AR8035 pin strapping: MODE#1: pull up */

			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030

			/* AR8035 pin strapping: MODE#3: pull up */

			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030

			/* AR8035 pin strapping: MODE#0: pull down */

			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030

		>;

	};



	pinctrl_flexcan2: flexcan2grp {

		fsl,pins = <

			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0

			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0

		>;

	};



	pinctrl_gpio_keys: gpio_keysgrp {

		fsl,pins = <

			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0

		>;

	};



	pinctrl_hdmi_cec: hdmicecgrp {

		fsl,pins = <

			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0

		>;

	};



	pinctrl_i2c1: i2c1grp {

		fsl,pins = <

			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1

			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1

		>;

	};



	pinctrl_i2c2: i2c2grp {

		fsl,pins = <

			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1

			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1

		>;

	};



	pinctrl_i2c3: i2c3grp {

		fsl,pins = <

			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1

			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1

		>;

	};



	pinctrl_i2c1_sgtl5000: i2c1-sgtl5000grp {

		fsl,pins = <

			MX6QDL_PAD_GPIO_0__CCM_CLKO1			0x000b0 /* sys_mclk */

			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x130b0 /*headphone det*/

			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x130b0 /*microphone det*/

		>;

	};



	pinctrl_pwm1: pwm1grp {

		fsl,pins = <

			MX6QDL_PAD_GPIO_9__PWM1_OUT	    0x1b0b1

		>;

	};



	pinctrl_uart1: uart1grp {

		fsl,pins = <

			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA	0x1b0b1

			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA	0x1b0b1

			MX6QDL_PAD_EIM_D20__UART1_CTS_B	0x1b0b1

			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1

			MX6QDL_PAD_EIM_D23__UART1_DCD_B	0x1b0b0

			MX6QDL_PAD_EIM_D24__UART1_DTR_B	0x1b0b0

			MX6QDL_PAD_EIM_D25__UART1_DSR_B	0x1b0b0

		>;

	};



	pinctrl_uart2: uart2grp {

		fsl,pins = <

			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1

			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1

			MX6QDL_PAD_EIM_D28__UART2_CTS_B	0x1b0b1

			MX6QDL_PAD_EIM_D29__UART2_RTS_B	0x1b0b1

		>;

	};



	pinctrl_uart3: uart3grp {

		fsl,pins = <

			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA	0x1b0b1

			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA	0x1b0b1

			MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1

			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1

		>;

	};



	pinctrl_uart4: uart4grp {

		fsl,pins = <

			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1

			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1

			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1

			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1

		>;

	};



	pinctrl_uart5: uart5grp {

		fsl,pins = <

			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1

			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1

			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B	0x1b0b1

			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B	0x1b0b1

			MX6QDL_PAD_EIM_A21__GPIO2_IO17		 0x15059 /*BT_EN*/

		>;

	};



	pinctrl_usbotg: usbotggrp {

		fsl,pins = <

			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059

		>;

	};



	pinctrl_usdhc1: usdhc1grp {

		fsl,pins = <

			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059

			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059

			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059

			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059

			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059

			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059

			MX6QDL_PAD_NANDF_D0__SD1_DATA4		0x17059

			MX6QDL_PAD_NANDF_D1__SD1_DATA5		0x17059

			MX6QDL_PAD_NANDF_D2__SD1_DATA6		0x17059

			MX6QDL_PAD_NANDF_D3__SD1_DATA7		0x17059

		>;

	};



	pinctrl_usdhc2: usdhc2grp {

		fsl,pins = <

			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059

			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059

			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059

			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059

			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059

			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059

			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x15059 /*WL_EN_LDO*/

			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x15059 /*WL_EN*/

			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x15059 /*WL_IRQ*/

		>;

	};



	pinctrl_usdhc3: usdhc3grp {

		fsl,pins = <

			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17071

			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071

			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17071

			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17071

			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17071

			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17071

		>;

	};



	pinctrl_wdog: wdoggrp {

		fsl,pins = <

			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b00

		>;

	};

};



&ldb {

	status = "okay";



	lvds-channel@1 {

		fsl,data-mapping = "spwg";

		fsl,data-width = <18>;

		status = "okay";



		port@4 {

			reg = <4>;



			lvds0_out: endpoint {

				remote-endpoint = <&panel_in>;

			};

		};

	};

};



&pwm1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_pwm1>;

	status = "okay";

};



&snvs_poweroff {

	status = "okay";

};



&ssi1 {

	status = "okay";

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart1>;

	uart-has-rtscts;

	fsl,dte-mode;

	status = "okay";

};



&uart2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart2>;

	uart-has-rtscts;

	status = "okay";

};



&uart3 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart3>;

	uart-has-rtscts;

	status = "okay";

};



&uart4 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart4>;

	uart-has-rtscts;

	status = "okay";

};



&uart5 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart5>;

	fsl,uart-has-rtscts;

	status = "okay";

};



&usbotg {

	vbus-supply = <&reg_usb_otg_vbus>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usbotg>;

	disable-over-current;

	srp-disable;

	hnp-disable;

	adp-disable;

	status = "okay";

};



&usbh1 {

	status = "okay";

};



&usbphy1 {

	fsl,tx-d-cal = <0x5>;

};



&usbphy2 {

	fsl,tx-d-cal = <0x5>;

};



&usdhc1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc1>;

	bus-width = <8>;

	keep-power-in-suspend;

	vmmc-supply = <&reg_3p3v>;

	status = "okay";

};



&usdhc2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc2>;

	bus-width = <4>;

	vmmc-supply = <&wlan_en_reg>;

	no-1-8-v;

	keep-power-in-suspend;

	non-removable;

	cap-power-off-card;

	status = "okay";



	#address-cells = <1>;

	#size-cells = <0>;

	wlcore: wlcore@2 {

		compatible = "ti,wl1835";

		reg = <2>;

		interrupt-parent = <&gpio5>;

		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;

		ref-clock-frequency = <38400000>;

		tcxo-clock-frequency = <26000000>;

	};

};



&usdhc3 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc3>;

	bus-width = <4>;

	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;

	no-1-8-v;

	keep-power-in-suspend;

	wakeup-source;

	status = "okay";

};



&sata {

	status = "okay";

};



&wdog1 {

	status = "okay";

};