isci: removing intel_*.h headers (8694e792) · Commits · e / devices / android_kernel_fairphone_FP4

drivers/scsi/isci/core/intel_sas.h

deleted100644 → 0

+0 −178

Original line number	Diff line number	Diff line
		/*
		* This file is provided under a dual BSD/GPLv2 license. When using or
		* redistributing this file, you may do so under either license.
		*
		* GPL LICENSE SUMMARY
		*
		* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of version 2 of the GNU General Public License as
		* published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful, but
		* WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
		* General Public License for more details.
		*
		* You should have received a copy of the GNU General Public License
		* along with this program; if not, write to the Free Software
		* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
		* The full GNU General Public License is included in this distribution
		* in the file called LICENSE.GPL.
		*
		* BSD LICENSE
		*
		* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
		* All rights reserved.
		*
		* Redistribution and use in source and binary forms, with or without
		* modification, are permitted provided that the following conditions
		* are met:
		*
		* * Redistributions of source code must retain the above copyright
		* notice, this list of conditions and the following disclaimer.
		* * Redistributions in binary form must reproduce the above copyright
		* notice, this list of conditions and the following disclaimer in
		* the documentation and/or other materials provided with the
		* distribution.
		* * Neither the name of Intel Corporation nor the names of its
		* contributors may be used to endorse or promote products derived
		* from this software without specific prior written permission.
		*
		* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
		* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
		* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
		* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
		* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
		* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
		* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
		* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
		* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
		* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
		* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
		*/

		#ifndef _INTEL_SAS_H_
		#define _INTEL_SAS_H_

		/**
		* This file contains all of the definitions relating to structures, constants,
		* etc. defined by the SAS specification.
		*
		*
		*/
		#include <linux/kernel.h>
		#include "intel_scsi.h"

		/**
		* struct sci_sas_address - This structure depicts how a SAS address is
		* represented by SCI.
		*
		*
		*/
		struct sci_sas_address {
		/**
		* This member contains the higher 32-bits of the SAS address.
		*/
		u32 high;

		/**
		* This member contains the lower 32-bits of the SAS address.
		*/
		u32 low;

		};

		/**
		* enum _SCI_SAS_TASK_ATTRIBUTE - This enumeration depicts the SAM/SAS
		* specification defined task attribute values for a command information
		* unit.
		*
		*
		*/
		enum sci_sas_task_attribute {
		SCI_SAS_SIMPLE_ATTRIBUTE = 0,
		SCI_SAS_HEAD_OF_QUEUE_ATTRIBUTE = 1,
		SCI_SAS_ORDERED_ATTRIBUTE = 2,
		SCI_SAS_ACA_ATTRIBUTE = 4,
		};

		/**
		* enum _SCI_SAS_TASK_MGMT_FUNCTION - This enumeration depicts the SAM/SAS
		* specification defined task management functions.
		*
		* This HARD_RESET function listed here is not actually defined as a task
		* management function in the industry standard.
		*/
		enum sci_sas_task_mgmt_function {
		SCI_SAS_ABORT_TASK = SCSI_TASK_REQUEST_ABORT_TASK,
		SCI_SAS_ABORT_TASK_SET = SCSI_TASK_REQUEST_ABORT_TASK_SET,
		SCI_SAS_CLEAR_TASK_SET = SCSI_TASK_REQUEST_CLEAR_TASK_SET,
		SCI_SAS_LOGICAL_UNIT_RESET = SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET,
		SCI_SAS_I_T_NEXUS_RESET = SCSI_TASK_REQUEST_I_T_NEXUS_RESET,
		SCI_SAS_CLEAR_ACA = SCSI_TASK_REQUEST_CLEAR_ACA,
		SCI_SAS_QUERY_TASK = SCSI_TASK_REQUEST_QUERY_TASK,
		SCI_SAS_QUERY_TASK_SET = SCSI_TASK_REQUEST_QUERY_TASK_SET,
		SCI_SAS_QUERY_ASYNCHRONOUS_EVENT = SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION,
		SCI_SAS_HARD_RESET = 0xFF
		};


		/**
		* enum _SCI_SAS_FRAME_TYPE - This enumeration depicts the SAS specification
		* defined SSP frame types.
		*
		*
		*/
		enum sci_sas_frame_type {
		SCI_SAS_DATA_FRAME = 0x01,
		SCI_SAS_XFER_RDY_FRAME = 0x05,
		SCI_SAS_COMMAND_FRAME = 0x06,
		SCI_SAS_RESPONSE_FRAME = 0x07,
		SCI_SAS_TASK_FRAME = 0x16
		};

		#define PHY_OPERATION_NOP 0x00
		#define PHY_OPERATION_LINK_RESET 0x01
		#define PHY_OPERATION_HARD_RESET 0x02
		#define PHY_OPERATION_DISABLE 0x03
		#define PHY_OPERATION_CLEAR_ERROR_LOG 0x05
		#define PHY_OPERATION_CLEAR_AFFILIATION 0x06

		#define NPLR_PHY_ENABLED_UNK_LINK_RATE 0x00
		#define NPLR_PHY_DISABLED 0x01
		#define NPLR_PHY_ENABLED_SPD_NEG_FAILED 0x02
		#define NPLR_PHY_ENABLED_SATA_HOLD 0x03
		#define NPLR_PHY_ENABLED_1_5G 0x08
		#define NPLR_PHY_ENABLED_3_0G 0x09

		/* SMP Function Result values. */
		#define SMP_RESULT_FUNCTION_ACCEPTED 0x00
		#define SMP_RESULT_UNKNOWN_FUNCTION 0x01
		#define SMP_RESULT_FUNCTION_FAILED 0x02
		#define SMP_RESULT_INVALID_REQUEST_FRAME_LEN 0x03
		#define SMP_RESULT_INAVALID_EXPANDER_CHANGE_COUNT 0x04
		#define SMP_RESULT_BUSY 0x05
		#define SMP_RESULT_INCOMPLETE_DESCRIPTOR_LIST 0x06
		#define SMP_RESULT_PHY_DOES_NOT_EXIST 0x10
		#define SMP_RESULT_INDEX_DOES_NOT_EXIST 0x11
		#define SMP_RESULT_PHY_DOES_NOT_SUPPORT_SATA 0x12
		#define SMP_RESULT_UNKNOWN_PHY_OPERATION 0x13
		#define SMP_RESULT_UNKNOWN_PHY_TEST_FUNCTION 0x14
		#define SMP_RESULT_PHY_TEST_IN_PROGRESS 0x15
		#define SMP_RESULT_PHY_VACANT 0x16

		/* Attached Device Types */
		#define SMP_NO_DEVICE_ATTACHED 0
		#define SMP_END_DEVICE_ONLY 1
		#define SMP_EDGE_EXPANDER_DEVICE 2
		#define SMP_FANOUT_EXPANDER_DEVICE 3

		/* Expander phy routine attribute */
		#define DIRECT_ROUTING_ATTRIBUTE 0
		#define SUBTRACTIVE_ROUTING_ATTRIBUTE 1
		#define TABLE_ROUTING_ATTRIBUTE 2

		#endif /* _INTEL_SAS_H_ */

drivers/scsi/isci/core/intel_scsi.h

deleted100644 → 0

+0 −474

Original line number	Diff line number	Diff line
		/*
		* This file is provided under a dual BSD/GPLv2 license. When using or
		* redistributing this file, you may do so under either license.
		*
		* GPL LICENSE SUMMARY
		*
		* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of version 2 of the GNU General Public License as
		* published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful, but
		* WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
		* General Public License for more details.
		*
		* You should have received a copy of the GNU General Public License
		* along with this program; if not, write to the Free Software
		* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
		* The full GNU General Public License is included in this distribution
		* in the file called LICENSE.GPL.
		*
		* BSD LICENSE
		*
		* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
		* All rights reserved.
		*
		* Redistribution and use in source and binary forms, with or without
		* modification, are permitted provided that the following conditions
		* are met:
		*
		* * Redistributions of source code must retain the above copyright
		* notice, this list of conditions and the following disclaimer.
		* * Redistributions in binary form must reproduce the above copyright
		* notice, this list of conditions and the following disclaimer in
		* the documentation and/or other materials provided with the
		* distribution.
		* * Neither the name of Intel Corporation nor the names of its
		* contributors may be used to endorse or promote products derived
		* from this software without specific prior written permission.
		*
		* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
		* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
		* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
		* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
		* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
		* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
		* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
		* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
		* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
		* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
		* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
		*/

		/**
		* This file defines all of the SCSI related constants, enumerations, and
		* types. Please note that this file does not necessarily contain an
		* exhaustive list of all constants, commands, sub-commands, etc.
		*
		*
		*/

		#ifndef _SCSI_H__
		#define _SCSI_H__


		/*
		* ******************************************************************************
		* * C O N S T A N T S A N D M A C R O S
		* ****************************************************************************** */

		/**
		* enum _SCSI_TASK_MGMT_REQUEST_CODES - This enumberation contains the
		* constants to be used for SCSI task management request codes. SAM does
		* not specify any particular values for these codes so constants used here
		* are the same as those specified in SAS.
		*
		*
		*/
		enum scsi_task_mgmt_request_codes {
		SCSI_TASK_REQUEST_ABORT_TASK = 0x01,
		SCSI_TASK_REQUEST_ABORT_TASK_SET = 0x02,
		SCSI_TASK_REQUEST_CLEAR_TASK_SET = 0x04,
		SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET = 0x08,
		SCSI_TASK_REQUEST_I_T_NEXUS_RESET = 0x10,
		SCSI_TASK_REQUEST_CLEAR_ACA = 0x40,
		SCSI_TASK_REQUEST_QUERY_TASK = 0x80,
		SCSI_TASK_REQUEST_QUERY_TASK_SET = 0x81,
		SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION = 0x82,

		};

		/**
		* enum _SCSI_TASK_MGMT_RESPONSE_CODES - This enumeration contains all of the
		* SCSI task management response codes.
		*
		*
		*/
		enum scsi_task_mgmt_response_codes {
		SCSI_TASK_MGMT_FUNC_COMPLETE = 0,
		SCSI_INVALID_FRAME = 2,
		SCSI_TASK_MGMT_FUNC_NOT_SUPPORTED = 4,
		SCSI_TASK_MGMT_FUNC_FAILED = 5,
		SCSI_TASK_MGMT_FUNC_SUCCEEDED = 8,
		SCSI_INVALID_LUN = 9
		};

		/**
		* enum _SCSI_SENSE_RESPONSE_CODE - this enumeration depicts the types of sense
		* data responses as per SPC-3.
		*
		*
		*/
		enum scsi_sense_response_code {
		SCSI_FIXED_CURRENT_RESPONSE_CODE = 0x70,
		SCSI_FIXED_DEFERRED_RESPONSE_CODE = 0x71,
		SCSI_DESCRIPTOR_CURRENT_RESPONSE_CODE = 0x72,
		SCSI_DESCRIPTOR_DEFERRED_RESPONSE_CODE = 0x73

		};

		/*
		* This constant represents the valid bit located in byte 0 of a FIXED
		* format sense data. */
		#define SCSI_FIXED_SENSE_DATA_VALID_BIT 0x80

		#define SCSI_FIXED_SENSE_DATA_BASE_LENGTH 18

		/* This value is used in the DATAPRES field of the SCSI Response IU. */
		#define SCSI_RESPONSE_DATA_PRES_SENSE_DATA 0x02

		/**
		*
		*
		* SCSI_SENSE_KEYS These constants delineate all of the SCSI protocol sense key
		* constants
		*/
		#define SCSI_SENSE_NO_SENSE 0x00
		#define SCSI_SENSE_RECOVERED_ERROR 0x01
		#define SCSI_SENSE_NOT_READY 0x02
		#define SCSI_SENSE_MEDIUM_ERROR 0x03
		#define SCSI_SENSE_HARDWARE_ERROR 0x04
		#define SCSI_SENSE_ILLEGAL_REQUEST 0x05
		#define SCSI_SENSE_UNIT_ATTENTION 0x06
		#define SCSI_SENSE_DATA_PROTECT 0x07
		#define SCSI_SENSE_BLANK_CHECK 0x08
		#define SCSI_SENSE_VENDOR_SPECIFIC 0x09
		#define SCSI_SENSE_COPY_ABORTED 0x0A
		#define SCSI_SENSE_ABORTED_COMMAND 0x0B
		#define SCSI_SENSE_VOLUME_OVERFLOW 0x0D
		#define SCSI_SENSE_MISCOMPARE 0x0E

		/**
		*
		*
		* SCSI_ADDITIONAL_SENSE_CODES These constants delineate all of the SCSI
		* protocol additional sense code constants.
		*/
		#define SCSI_ASC_NO_ADDITIONAL_SENSE 0x00
		#define SCSI_ASC_INITIALIZING_COMMAND_REQUIRED 0x04
		#define SCSI_ASC_LUN_SELF_TEST_IN_PROGRESS 0x04
		#define SCSI_ASC_LUN_FORMAT_IN_PROGRESS 0x04
		#define SCSI_ASC_LUN_NOT_RESPOND_TO_SELECTION 0x05
		#define SCSI_ASC_UNRECOVERED_READ_ERROR 0x11
		#define SCSI_ASC_INVALID_COMMAND_OPERATION_CODE 0x20
		#define SCSI_ASC_LBA_OUT_OF_RANGE 0x21
		#define SCSI_ASC_INVALID_FIELD_IN_CDB 0x24
		#define SCSI_ASC_INVALID_FIELD_IN_PARM_LIST 0x26
		#define SCSI_ASC_WRITE_PROTECTED 0x27
		#define SCSI_ASC_NOT_READY_TO_READY_CHANGE 0x28
		#define SCSI_ASC_SAVING_PARMS_NOT_SUPPORTED 0x39
		#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3A
		#define SCSI_ASC_INTERNAL_TARGET_FAILURE 0x44
		#define SCSI_ASC_IU_CRC_ERROR_DETECTED 0x47
		#define SCSI_ASC_MEDIUM_REMOVAL_REQUEST 0x5A
		#define SCSI_ASC_COMMAND_SEQUENCE_ERROR 0x2C
		#define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED 0x53
		#define SCSI_ASC_HARDWARE_IMPENDING_FAILURE 0x5D
		#define SCSI_ASC_POWER_STATE_CHANGE 0x5E
		#define SCSI_DIAGNOSTIC_FAILURE_ON_COMPONENT 0x40
		#define SCSI_ASC_ATA_DEVICE_FEATURE_NOT_ENABLED 0x67

		/**
		*
		*
		* SCSI_ADDITIONAL_SENSE_CODE_QUALIFIERS This enumeration contains all of the
		* used SCSI protocol additional sense code qualifier constants.
		*/
		#define SCSI_ASCQ_NO_ADDITIONAL_SENSE 0x00
		#define SCSI_ASCQ_INVALID_FIELD_IN_CDB 0x00
		#define SCSI_ASCQ_INVALID_FIELD_IN_PARM_LIST 0x00
		#define SCSI_ASCQ_LUN_NOT_RESPOND_TO_SELECTION 0x00
		#define SCSI_ASCQ_INTERNAL_TARGET_FAILURE 0x00
		#define SCSI_ASCQ_LBA_OUT_OF_RANGE 0x00
		#define SCSI_ASCQ_MEDIUM_NOT_PRESENT 0x00
		#define SCSI_ASCQ_NOT_READY_TO_READY_CHANGE 0x00
		#define SCSI_ASCQ_WRITE_PROTECTED 0x00
		#define SCSI_ASCQ_UNRECOVERED_READ_ERROR 0x00
		#define SCSI_ASCQ_SAVING_PARMS_NOT_SUPPORTED 0x00
		#define SCSI_ASCQ_INVALID_COMMAND_OPERATION_CODE 0x00
		#define SCSI_ASCQ_MEDIUM_REMOVAL_REQUEST 0x01
		#define SCSI_ASCQ_INITIALIZING_COMMAND_REQUIRED 0x02
		#define SCSI_ASCQ_IU_CRC_ERROR_DETECTED 0x03
		#define SCSI_ASCQ_LUN_FORMAT_IN_PROGRESS 0x04
		#define SCSI_ASCQ_LUN_SELF_TEST_IN_PROGRESS 0x09
		#define SCSI_ASCQ_GENERAL_HARD_DRIVE_FAILURE 0x10
		#define SCSI_ASCQ_IDLE_CONDITION_ACTIVATE_BY_COMMAND 0x03
		#define SCSI_ASCQ_STANDBY_CONDITION_ACTIVATE_BY_COMMAND 0x04
		#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_IDLE 0x42
		#define SCSI_ASCQ_POWER_STATE_CHANGE_TO_STANDBY 0x43
		#define SCSI_ASCQ_ATA_DEVICE_FEATURE_NOT_ENABLED 0x0B
		#define SCSI_ASCQ_UNRECOVERED_READ_ERROR_AUTO_REALLOCATE_FAIL 0x04



		/**
		*
		*
		* SCSI_STATUS_CODES These constants define all of the used SCSI status values.
		*/
		#define SCSI_STATUS_GOOD 0x00
		#define SCSI_STATUS_CHECK_CONDITION 0x02
		#define SCSI_STATUS_CONDITION_MET 0x04
		#define SCSI_STATUS_BUSY 0x08
		#define SCSI_STATUS_TASKFULL 0x28
		#define SCSI_STATUS_ACA 0x30
		#define SCSI_STATUS_ABORT 0x40

		/**
		*
		*
		* SCSI_OPERATION_CODES These constants delineate all of the SCSI
		* command/operation codes.
		*/
		#define SCSI_INQUIRY 0x12
		#define SCSI_READ_CAPACITY_10 0x25
		#define SCSI_SERVICE_ACTION_IN_16 0x9E
		#define SCSI_TEST_UNIT_READY 0x00
		#define SCSI_START_STOP_UNIT 0x1B
		#define SCSI_SYNCHRONIZE_CACHE_10 0x35
		#define SCSI_SYNCHRONIZE_CACHE_16 0x91
		#define SCSI_REQUEST_SENSE 0x03
		#define SCSI_REPORT_LUNS 0xA0
		#define SCSI_REASSIGN_BLOCKS 0x07
		#define SCSI_READ_6 0x08
		#define SCSI_READ_10 0x28
		#define SCSI_READ_12 0xA8
		#define SCSI_READ_16 0x88
		#define SCSI_WRITE_6 0x0A
		#define SCSI_WRITE_10 0x2A
		#define SCSI_WRITE_12 0xAA
		#define SCSI_WRITE_16 0x8A
		#define SCSI_VERIFY_10 0x2F
		#define SCSI_VERIFY_12 0xAF
		#define SCSI_VERIFY_16 0x8F
		#define SCSI_SEEK_6 0x01
		#define SCSI_SEEK_10 0x02
		#define SCSI_WRITE_VERIFY 0x2E
		#define SCSI_FORMAT_UNIT 0x04
		#define SCSI_READ_BUFFER 0x3C
		#define SCSI_WRITE_BUFFER 0x3B
		#define SCSI_SEND_DIAGNOSTIC 0x1D
		#define SCSI_RECEIVE_DIAGNOSTIC 0x1C
		#define SCSI_MODE_SENSE_6 0x1A
		#define SCSI_MODE_SENSE_10 0x5A
		#define SCSI_MODE_SELECT_6 0x15
		#define SCSI_MODE_SELECT_10 0x55
		#define SCSI_MAINTENANCE_IN 0xA3
		#define SCSI_LOG_SENSE 0x4D
		#define SCSI_LOG_SELECT 0x4C
		#define SCSI_RESERVE_6 0x16
		#define SCSI_RESERVE_10 0x56
		#define SCSI_RELEASE_6 0x17
		#define SCSI_RELEASE_10 0x57
		#define SCSI_ATA_PASSTHRU_12 0xA1
		#define SCSI_ATA_PASSTHRU_16 0x85
		#define SCSI_WRITE_LONG_10 0x3F
		#define SCSI_WRITE_LONG_16 0x9F
		#define SCSI_PERSISTENT_RESERVE_IN 0x5E
		#define SCSI_PERSISTENT_RESERVE_OUT 0x5F

		/**
		*
		*
		* SCSI_SERVICE_ACTION_IN_CODES Service action in operations.
		*/
		#define SCSI_SERVICE_ACTION_IN_CODES_READ_CAPACITY_16 0x10

		#define SCSI_SERVICE_ACTION_MASK 0x1f

		/**
		*
		*
		* SCSI_MAINTENANCE_IN_SERVICE_ACTION_CODES MAINTENANCE IN service action codes.
		*/
		#define SCSI_REPORT_TASK_MGMT 0x0D
		#define SCSI_REPORT_OP_CODES 0x0C

		/**
		*
		*
		* SCSI_MODE_PAGE_CONTROLS These constants delineate all of the used SCSI Mode
		* Page control values.
		*/
		#define SCSI_MODE_SENSE_PC_CURRENT 0x0
		#define SCSI_MODE_SENSE_PC_CHANGEABLE 0x1
		#define SCSI_MODE_SENSE_PC_DEFAULT 0x2
		#define SCSI_MODE_SENSE_PC_SAVED 0x3

		#define SCSI_MODE_SENSE_PC_SHIFT 0x06
		#define SCSI_MODE_SENSE_PAGE_CODE_ENABLE 0x3F
		#define SCSI_MODE_SENSE_DBD_ENABLE 0x08
		#define SCSI_MODE_SENSE_LLBAA_ENABLE 0x10

		/**
		*
		*
		* SCSI_MODE_PAGE_CODES These constants delineate all of the used SCSI Mode
		* Page codes.
		*/
		#define SCSI_MODE_PAGE_READ_WRITE_ERROR 0x01
		#define SCSI_MODE_PAGE_DISCONNECT_RECONNECT 0x02
		#define SCSI_MODE_PAGE_CACHING 0x08
		#define SCSI_MODE_PAGE_CONTROL 0x0A
		#define SCSI_MODE_PAGE_PROTOCOL_SPECIFIC_PORT 0x19
		#define SCSI_MODE_PAGE_POWER_CONDITION 0x1A
		#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_CONTROL 0x1C
		#define SCSI_MODE_PAGE_ALL_PAGES 0x3F

		#define SCSI_MODE_SENSE_ALL_SUB_PAGES_CODE 0xFF
		#define SCSI_MODE_SENSE_NO_SUB_PAGES_CODE 0x0
		#define SCSI_MODE_SENSE_PROTOCOL_PORT_NUM_SUBPAGES 0x1
		#define SCSI_MODE_PAGE_CACHE_PAGE_WCE_BIT 0x04
		#define SCSI_MODE_PAGE_CACHE_PAGE_DRA_BIT 0x20
		#define SCSI_MODE_PAGE_DEXCPT_ENABLE 0x08
		#define SCSI_MODE_SENSE_HEADER_FUA_ENABLE 0x10
		#define SCSI_MODE_PAGE_POWER_CONDITION_STANDBY 0x1
		#define SCSI_MODE_PAGE_POWER_CONDITION_IDLE 0x2

		#define SCSI_MODE_SENSE_6_HEADER_LENGTH 4
		#define SCSI_MODE_SENSE_10_HEADER_LENGTH 8
		#define SCSI_MODE_SENSE_STD_BLOCK_DESCRIPTOR_LENGTH 8
		#define SCSI_MODE_SENSE_LLBA_BLOCK_DESCRIPTOR_LENGTH 16

		#define SCSI_MODE_PAGE_INFORMATIONAL_EXCP_DXCPT_ENABLE 0x08
		#define SCSI_MODE_PAGE_19_SAS_ID 0x6
		#define SCSI_MODE_PAGE_19_SUB1_PAGE_NUM 0x1
		#define SCSI_MODE_PAGE_19_SUB1_PC 0x59

		#define SCSI_MODE_HEADER_MEDIUM_TYPE_SBC 0x00

		/* Mode Select constrains related masks value */
		#define SCSI_MODE_SELECT_PF_BIT 0x1
		#define SCSI_MODE_SELECT_PF_MASK 0x10
		#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_BYTE 0x6
		#define SCSI_MODE_SELECT_MODE_PAGE_MRIE_MASK 0x0F
		#define SCSI_MODE_SELECT_MODE_PAGE_SPF_MASK 0x40
		#define SCSI_MODE_SELECT_MODE_PAGE_01_AWRE_MASK 0x80
		#define SCSI_MODE_SELECT_MODE_PAGE_01_ARRE_MASK 0x40
		#define SCSI_MODE_SELECT_MODE_PAGE_01_RC_ERBITS_MASK 0x1F
		#define SCSI_MODE_SELECT_MODE_PAGE_08_FSW_LBCSS_NVDIS 0xC1
		#define SCSI_MODE_SELECT_MODE_PAGE_1C_PERF_TEST 0x84
		#define SCSI_MODE_SELECT_MODE_PAGE_0A_TST_TMF_RLEC 0xF1
		#define SCSI_MODE_SELECT_MODE_PAGE_0A_MODIFIER 0xF0
		#define SCSI_MODE_SELECT_MODE_PAGE_0A_UA_SWP 0x38
		#define SCSI_MODE_SELECT_MODE_PAGE_0A_TAS_AUTO 0x47


		#define SCSI_CONTROL_BYTE_NACA_BIT_ENABLE 0x04
		#define SCSI_MOVE_FUA_BIT_ENABLE 0x08
		#define SCSI_READ_CAPACITY_PMI_BIT_ENABLE 0x01
		#define SCSI_READ_CAPACITY_10_DATA_LENGTH 8
		#define SCSI_READ_CAPACITY_16_DATA_LENGTH 32

		/* Inquiry constants */
		#define SCSI_INQUIRY_EVPD_ENABLE 0x01
		#define SCSI_INQUIRY_PAGE_CODE_OFFSET 0x02
		#define SCSI_INQUIRY_SUPPORTED_PAGES_PAGE 0x00
		#define SCSI_INQUIRY_UNIT_SERIAL_NUM_PAGE 0x80
		#define SCSI_INQUIRY_DEVICE_ID_PAGE 0x83
		#define SCSI_INQUIRY_ATA_INFORMATION_PAGE 0x89
		#define SCSI_INQUIRY_BLOCK_DEVICE_PAGE 0xB1
		#define SCSI_INQUIRY_BLOCK_DEVICE_LENGTH 0x3C
		#define SCSI_INQUIRY_STANDARD_ALLOCATION_LENGTH 0x24 /* 36 */

		#define SCSI_REQUEST_SENSE_ALLOCATION_LENGTH 0xFC /* 252 */

		/** Defines the log page codes that are use in gathing Smart data
		*/
		#define SCSI_LOG_PAGE_SUPPORTED_PAGES 0x00
		#define SCSI_LOG_PAGE_INFORMATION_EXCEPTION 0x2F
		#define SCSI_LOG_PAGE_SELF_TEST 0x10

		/**
		*
		*
		* SCSI_INQUIRY_VPD The following are constants used with vital product data
		* inquiry pages. Values are already shifted into the proper nibble location.
		*/
		#define SCSI_PIV_ENABLE 0x80
		#define SCSI_LUN_ASSOCIATION 0x00
		#define SCSI_TARGET_PORT_ASSOCIATION 0x10

		#define SCSI_VEN_UNIQUE_IDENTIFIER_TYPE 0x00
		#define SCSI_NAA_IDENTIFIER_TYPE 0x03

		#define SCSI_T10_IDENTIFIER_TYPE 0x01
		#define SCSI_BINARY_CODE_SET 0x01
		#define SCSI_ASCII_CODE_SET 0x02
		#define SCSI_FC_PROTOCOL_IDENTIFIER 0x00
		#define SCSI_SAS_PROTOCOL_IDENTIFIER 0x60

		#define SCSI_VERIFY_BYTCHK_ENABLED 0x02

		#define SCSI_SYNCHRONIZE_CACHE_IMMED_ENABLED 0x02
		/**
		*
		*
		* SCSI_START_STOP_UNIT_POWER_CONDITION_CODES The following are SCSI Start Stop
		* Unit command Power Condition codes.
		*/
		#define SCSI_START_STOP_UNIT_POWER_CONDITION_START_VALID 0x0
		#define SCSI_START_STOP_UNIT_POWER_CONDITION_ACTIVE 0x1
		#define SCSI_START_STOP_UNIT_POWER_CONDITION_IDLE 0x2
		#define SCSI_START_STOP_UNIT_POWER_CONDITION_STANDBY 0x3
		#define SCSI_START_STOP_UNIT_POWER_CONDITION_LU_CONTROL 0x7
		#define SCSI_START_STOP_UNIT_POWER_CONDITION_FORCE_S_CONTROL 0xB

		#define SCSI_START_STOP_UNIT_IMMED_MASK 0x1
		#define SCSI_START_STOP_UNIT_IMMED_SHIFT 0

		#define SCSI_START_STOP_UNIT_START_BIT_MASK 0x1
		#define SCSI_START_STOP_UNIT_START_BIT_SHIFT 0

		#define SCSI_START_STOP_UNIT_LOEJ_BIT_MASK 0x2
		#define SCSI_START_STOP_UNIT_LOEJ_BIT_SHIFT 1

		#define SCSI_START_STOP_UNIT_NO_FLUSH_MASK 0x4
		#define SCSI_START_STOP_UNIT_NO_FLUSH_SHIFT 2

		#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_MASK 0xF
		#define SCSI_START_STOP_UNIT_POWER_CONDITION_MODIFIER_SHIFT 0

		#define SCSI_START_STOP_UNIT_POWER_CONDITION_MASK 0xF0
		#define SCSI_START_STOP_UNIT_POWER_CONDITION_SHIFT 4

		#define SCSI_LOG_SENSE_PC_FIELD_MASK 0xC0
		#define SCSI_LOG_SENSE_PC_FIELD_SHIFT 6

		#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_MASK 0x3F
		#define SCSI_LOG_SENSE_PAGE_CODE_FIELD_SHIFT 0

		/**
		*
		*
		* MRIE - Method of reporting informational exceptions codes
		*/
		#define NO_REPORTING_INFO_EXCEPTION_CONDITION 0x0
		#define ASYNCHRONOUS_EVENT_REPORTING 0x1
		#define ESTABLISH_UNIT_ATTENTION_CONDITION 0x2
		#define CONDITIONALLY_GENERATE_RECOVERED_ERROR 0x3
		#define UNCONDITIONALLY_GENERATE_RECOVERED_ERROR 0x4
		#define GENERATE_NO_SENSE 0x5
		#define REPORT_INFO_EXCEPTION_CONDITION_ON_REQUEST 0x6

		#define SCSI_INFORMATION_EXCEPTION_DEXCPT_BIT 0x08

		/* Reassign Blocks masks */
		#define SCSI_REASSIGN_BLOCKS_LONGLBA_BIT 0x02
		#define SCSI_REASSIGN_BLOCKS_LONGLIST_BIT 0x01

		#endif /* _SCSI_H_ */

drivers/scsi/isci/core/scic_config_parameters.h

+0 −1

Original line number	Diff line number	Diff line
		@@ -66,7 +66,6 @@


		#include "sci_status.h"
		#include "intel_sas.h"
		#include "sci_controller_constants.h"
		#include "probe_roms.h"

drivers/scsi/isci/core/scic_io_request.h

+2 −4

File changed.

Preview size limit exceeded, changes collapsed.

drivers/scsi/isci/core/scic_phy.h

+0 −1

Original line number	Diff line number	Diff line
		@@ -67,7 +67,6 @@
		#include <scsi/sas.h>
		#include <scsi/libsas.h>
		#include "sci_status.h"
		#include "intel_sas.h"

		struct scic_sds_phy;
		struct scic_sds_port;