Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 843fecce authored by Florian Vaussard's avatar Florian Vaussard Committed by Tomi Valkeinen
Browse files

ARM: dts: duovero-parlor: Add HDMI output 



Add the necessary DTS nodes to enable the micro-HDMI output on Parlor
board.

Signed-off-by: default avatarFlorian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
parent 6f0c7a41

arch/arm/boot/dts/omap4-duovero-parlor.dts

+44 −0
Original line number Diff line number Diff line
@@ -15,6 +15,10 @@ 
	model = "OMAP4430 Gumstix Duovero on Parlor";

	compatible = "gumstix,omap4-duovero-parlor", "gumstix,omap4-duovero", "ti,omap4430", "ti,omap4";



	aliases {

		display0 = &hdmi0;

	};



	leds {

		compatible = "gpio-leds";

		led0 {
@@ -35,6 +39,21 @@ 
			gpio-key,wakeup;

		};

	};



	hdmi0: connector@0 {

		compatible = "hdmi-connector";

		label = "hdmi";



		type = "d";



		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio_63 */



		port {

			hdmi_connector_in: endpoint {

				remote-endpoint = <&hdmi_out>;

			};

		};

	};

};



&omap4_pmx_core {
@@ -77,6 +96,15 @@ 
			OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48: amdix enabled */

		>;

	};



	dss_hdmi_pins: pinmux_dss_hdmi_pins {

		pinctrl-single,pins = <

			OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)		/* hdmi_hpd.gpio_63 */

			OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */

			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */

			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */

		>;

	};

};



&i2c2 {
@@ -143,4 +171,20 @@ 
	};

};



&dss {

	status = "ok";

};



&hdmi {

	status = "ok";



	pinctrl-names = "default";

	pinctrl-0 = <&dss_hdmi_pins>;



	port {

		hdmi_out: endpoint {

			remote-endpoint = <&hdmi_connector_in>;

		};

	};

};