Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 82321c2b authored by Pekka Enberg's avatar Pekka Enberg Committed by Greg Kroah-Hartman
Browse files

Staging: w35und: remove dead code from wbhal.c 



Remove tons of unused code from wbhal.c.

Acked-by: default avatarPavel Machek <pavel@suse.cz>
Signed-off-by: default avatarPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 5c58093e

drivers/staging/winbond/wbhal.c

+1 −310
Original line number Original line Diff line number Diff line
@@ -2,13 +2,6 @@ 
#include "wbhal_f.h"

#include "wbhal_f.h"

#include "wblinux_f.h"

#include "wblinux_f.h"





void hal_get_ethernet_address( phw_data_t pHwData, u8 *current_address )

{

	if( pHwData->SurpriseRemove ) return;



	memcpy( current_address, pHwData->CurrentMacAddress, ETH_LENGTH_OF_ADDRESS );

}



void hal_set_ethernet_address( phw_data_t pHwData, u8 *current_address )

void hal_set_ethernet_address( phw_data_t pHwData, u8 *current_address )

{

{

	u32 ltmp[2];

	u32 ltmp[2];
@@ -376,92 +369,6 @@ void hal_halt(phw_data_t pHwData, void *ppa_data) 
	}

	}

}

}





//---------------------------------------------------------------------------------------------------

void hal_set_rates(phw_data_t pHwData, u8 *pbss_rates,

		   u8 length, unsigned char basic_rate_set)

{

	struct wb35_reg *reg = &pHwData->reg;

	u32		tmp, tmp1;

	u8		Rate[12]={ 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108 };

	u8		SupportedRate[16];

	u8		i, j, k, Count1, Count2, Byte;



	if( pHwData->SurpriseRemove ) return;



	if (basic_rate_set) {

		reg->M28_MacControl &= ~0x000fff00;

		tmp1 = 0x00000100;

	} else {

		reg->M28_MacControl &= ~0xfff00000;

		tmp1 = 0x00100000;

	}



	tmp = 0;

	for (i=0; i<length; i++) {

		Byte = pbss_rates[i] & 0x7f;

		for (j=0; j<12; j++) {

			if( Byte == Rate[j] )

				break;

		}



		if (j < 12)

			tmp |= (tmp1<<j);

	}



	reg->M28_MacControl |= tmp;

	Wb35Reg_Write( pHwData, 0x0828, reg->M28_MacControl );



	// 930206.2.c M78 setting

	j = k = Count1 = Count2 = 0;

	memset( SupportedRate, 0, 16 );

	tmp = 0x00100000;

	tmp1 = 0x00000100;

	for (i=0; i<12; i++) { // Get the supported rate

		if (tmp & reg->M28_MacControl) {

			SupportedRate[j] = Rate[i];



			if (tmp1 & reg->M28_MacControl)

				SupportedRate[j] |= 0x80;



			if (k)

				Count2++;

			else

				Count1++;



			j++;

		}



		if (i==4 && k==0) {

			if( !(reg->M28_MacControl & 0x000ff000) ) // if basic rate in 11g domain)

			{

				k = 1;

				j = 8;

			}

		}



		tmp <<= 1;

		tmp1 <<= 1;

	}



	// Fill data into support rate until buffer full

	//---20060926 add by anson's endian

	for (i=0; i<4; i++)

		*(u32 *)(SupportedRate+(i<<2)) = cpu_to_le32( *(u32 *)(SupportedRate+(i<<2)) );

	//--- end 20060926 add by anson's endian

	Wb35Reg_BurstWrite( pHwData,0x087c, (u32 *)SupportedRate, 4, AUTO_INCREMENT );

	reg->M7C_MacControl = ((u32 *)SupportedRate)[0];

	reg->M80_MacControl = ((u32 *)SupportedRate)[1];

	reg->M84_MacControl = ((u32 *)SupportedRate)[2];

	reg->M88_MacControl = ((u32 *)SupportedRate)[3];



	// Fill length

	tmp = Count1<<28 | Count2<<24;

	reg->M78_ERPInformation &= ~0xff000000;

	reg->M78_ERPInformation |= tmp;

	Wb35Reg_Write( pHwData, 0x0878, reg->M78_ERPInformation );

}





//---------------------------------------------------------------------------------------------------

//---------------------------------------------------------------------------------------------------

void hal_set_beacon_period(  phw_data_t pHwData,  u16 beacon_period )

void hal_set_beacon_period(  phw_data_t pHwData,  u16 beacon_period )

{

{
@@ -476,7 +383,7 @@ void hal_set_beacon_period( phw_data_t pHwData, u16 beacon_period ) 
}

}









void hal_set_current_channel_ex(  phw_data_t pHwData,  ChanInfo channel )

static void hal_set_current_channel_ex(  phw_data_t pHwData,  ChanInfo channel )

{

{

	struct wb35_reg *reg = &pHwData->reg;

	struct wb35_reg *reg = &pHwData->reg;
@@ -502,12 +409,6 @@ void hal_set_current_channel( phw_data_t pHwData, ChanInfo channel ) 
	hal_set_current_channel_ex( pHwData, channel );

	hal_set_current_channel_ex( pHwData, channel );

}

}

//---------------------------------------------------------------------------------------------------

//---------------------------------------------------------------------------------------------------

void hal_get_current_channel(  phw_data_t pHwData,  ChanInfo *channel )

{

	channel->ChanNo = pHwData->Channel;

	channel->band = pHwData->band;

}

//---------------------------------------------------------------------------------------------------

void hal_set_accept_broadcast(  phw_data_t pHwData,  u8 enable )

void hal_set_accept_broadcast(  phw_data_t pHwData,  u8 enable )

{

{

	struct wb35_reg *reg = &pHwData->reg;

	struct wb35_reg *reg = &pHwData->reg;
@@ -565,46 +466,6 @@ void hal_set_accept_beacon( phw_data_t pHwData, u8 enable ) 
	Wb35Reg_Write( pHwData, 0x0800, reg->M00_MacControl );

	Wb35Reg_Write( pHwData, 0x0800, reg->M00_MacControl );

}

}

//---------------------------------------------------------------------------------------------------

//---------------------------------------------------------------------------------------------------

void hal_set_multicast_address( phw_data_t pHwData, u8 *address, u8 number )

{

	struct wb35_reg *reg = &pHwData->reg;

	u8		Byte, Bit;



	if( pHwData->SurpriseRemove ) return;



	//Erases and refills the card multicast registers. Used when an address

	//    has been deleted and all bits must be recomputed.

	reg->M04_MulticastAddress1 = 0;

	reg->M08_MulticastAddress2 = 0;



	while( number )

	{

		number--;

		CardGetMulticastBit( (address+(number*ETH_LENGTH_OF_ADDRESS)), &Byte, &Bit);

		reg->Multicast[Byte] |= Bit;

	}



	// Updating register

	Wb35Reg_BurstWrite( pHwData, 0x0804, (u32 *)reg->Multicast, 2, AUTO_INCREMENT );

}

//---------------------------------------------------------------------------------------------------

u8 hal_get_accept_beacon(  phw_data_t pHwData )

{

	struct wb35_reg *reg = &pHwData->reg;



	if( pHwData->SurpriseRemove ) return 0;



	if( reg->M00_MacControl & 0x04000000 )

		return 1;

	else

		return 0;

}



unsigned char hal_reset_hardware( phw_data_t pHwData, void* ppa )

{

	// Not implement yet

	return true;

}





void hal_stop(  phw_data_t pHwData )

void hal_stop(  phw_data_t pHwData )

{

{
@@ -631,115 +492,11 @@ unsigned char hal_idle(phw_data_t pHwData) 
	return true;

	return true;

}

}

//---------------------------------------------------------------------------------------------------

//---------------------------------------------------------------------------------------------------

void hal_set_cwmin(  phw_data_t pHwData,  u8	cwin_min )

{

	struct wb35_reg *reg = &pHwData->reg;



	if( pHwData->SurpriseRemove ) return;



	pHwData->cwmin = cwin_min;

	reg->M2C_MacControl &= ~0x7c00;	//bit 10 ~ 14

	reg->M2C_MacControl |= (pHwData->cwmin<<10);

	Wb35Reg_Write( pHwData, 0x082c, reg->M2C_MacControl );

}



s32 hal_get_rssi(  phw_data_t pHwData,  u32 *HalRssiArry,  u8 Count )

{

	struct wb35_reg *reg = &pHwData->reg;

	R01_DESCRIPTOR	r01;

	s32 ltmp = 0, tmp;

	u8	i;



	if( pHwData->SurpriseRemove ) return -200;

	if( Count > MAX_ACC_RSSI_COUNT ) // Because the TS may use this funtion

		Count = MAX_ACC_RSSI_COUNT;



	// RSSI = C1 + C2 * (agc_state[7:0] + offset_map(lna_state[1:0]))

	// C1 = -195, C2 = 0.66 = 85/128

	for (i=0; i<Count; i++)

	{

		r01.value = HalRssiArry[i];

		tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;

		ltmp += tmp;

	}

	ltmp /= Count;

	if( pHwData->phy_type == RF_AIROHA_2230 ) ltmp -= 5; // 10;

	if( pHwData->phy_type == RF_AIROHA_2230S ) ltmp -= 5; // 10; 20060420 Add this



	//if( ltmp < -200 ) ltmp = -200;

	if( ltmp < -110 ) ltmp = -110;// 1.0.24.0 For NJRC



	return ltmp;

}

//----------------------------------------------------------------------------------------------------

s32 hal_get_rssi_bss(struct wbsoft_priv *adapter,  u16 idx,  u8 Count)

{

	phw_data_t pHwData = &adapter->sHwData;

	struct wb35_reg *reg = &pHwData->reg;

	R01_DESCRIPTOR	r01;

	s32 ltmp = 0, tmp;

	u8	i, j;

//	u32 *HalRssiArry = psBSS(idx)->HalRssi;



	if( pHwData->SurpriseRemove ) return -200;

	if( Count > MAX_ACC_RSSI_COUNT ) // Because the TS may use this funtion

		Count = MAX_ACC_RSSI_COUNT;



	// RSSI = C1 + C2 * (agc_state[7:0] + offset_map(lna_state[1:0]))

	// C1 = -195, C2 = 0.66 = 85/128

#if 0

	for (i=0; i<Count; i++)

	{

		r01.value = HalRssiArry[i];

		tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;

		ltmp += tmp;

	}

#else

	if (psBSS(idx)->HalRssiIndex == 0)

		psBSS(idx)->HalRssiIndex = MAX_ACC_RSSI_COUNT;

	j = (u8)psBSS(idx)->HalRssiIndex-1;



	for (i=0; i<Count; i++)

	{

		r01.value = psBSS(idx)->HalRssi[j];

		tmp = ((( r01.R01_AGC_state + reg->LNAValue[r01.R01_LNA_state]) * 85 ) >>7 ) - 195;

		ltmp += tmp;

		if (j == 0)

		{

			j = MAX_ACC_RSSI_COUNT;

		}

		j--;

	}

#endif

	ltmp /= Count;

	if( pHwData->phy_type == RF_AIROHA_2230 ) ltmp -= 5; // 10;

	if( pHwData->phy_type == RF_AIROHA_2230S ) ltmp -= 5; // 10; 20060420 Add this



	//if( ltmp < -200 ) ltmp = -200;

	if( ltmp < -110 ) ltmp = -110;// 1.0.24.0 For NJRC



	return ltmp;

}



//---------------------------------------------------------------------------



void hal_set_phy_type(  phw_data_t pHwData,  u8 PhyType )

void hal_set_phy_type(  phw_data_t pHwData,  u8 PhyType )

{

{

	pHwData->phy_type = PhyType;

	pHwData->phy_type = PhyType;

}

}





void hal_get_phy_type(  phw_data_t pHwData,  u8 *PhyType )

{

	*PhyType = pHwData->phy_type;

}



void hal_reset_counter(  phw_data_t pHwData )

{

	pHwData->dto_tx_retry_count = 0;

	pHwData->dto_tx_frag_count = 0;

	memset( pHwData->tx_retry_count, 0, 8);

}



void hal_set_radio_mode( phw_data_t pHwData,  unsigned char radio_off)

void hal_set_radio_mode( phw_data_t pHwData,  unsigned char radio_off)

{

{

	struct wb35_reg *reg = &pHwData->reg;

	struct wb35_reg *reg = &pHwData->reg;
@@ -769,22 +526,6 @@ u8 hal_get_antenna_number( phw_data_t pHwData ) 
		return 1;

		return 1;

}

}





void hal_set_antenna_number(  phw_data_t pHwData, u8 number )

{



	struct wb35_reg *reg = &pHwData->reg;



	if (number == 1) {

		reg->BB2C |= BIT(11);

	} else {

		reg->BB2C &= ~BIT(11);

	}

	Wb35Reg_Write( pHwData, 0x102c, reg->BB2C );

#ifdef _PE_STATE_DUMP_

	WBDEBUG(("Current antenna number : %d\n", number));

#endif

}



//----------------------------------------------------------------------------------------------------

//----------------------------------------------------------------------------------------------------

//0 : radio on; 1: radio off

//0 : radio on; 1: radio off

u8 hal_get_hw_radio_off(  phw_data_t pHwData )

u8 hal_get_hw_radio_off(  phw_data_t pHwData )
@@ -821,57 +562,7 @@ unsigned char hal_set_dxx_reg( phw_data_t pHwData, u16 number, u32 value ) 
	return ret;

	return ret;

}

}





void hal_scan_status_indicate(phw_data_t pHwData, unsigned char IsOnProgress)

{

	if( pHwData->SurpriseRemove ) return;

	pHwData->LED_Scanning = IsOnProgress ? 1 : 0;

}



void hal_system_power_change(phw_data_t pHwData, u32 PowerState)

{

	if( PowerState != 0 )

	{

		pHwData->SurpriseRemove = 1;

		if( pHwData->WbUsb.IsUsb20 )

			hal_stop( pHwData );

	}

	else

	{

		if( !pHwData->WbUsb.IsUsb20 )

			hal_stop( pHwData );

	}

}



void hal_surprise_remove(struct wbsoft_priv *adapter)

{

	phw_data_t pHwData = &adapter->sHwData;



	if (atomic_inc_return( &pHwData->SurpriseRemoveCount ) == 1) {

		#ifdef _PE_STATE_DUMP_

		WBDEBUG(("Calling hal_surprise_remove\n"));

		#endif

	}

}



void hal_rate_change(struct wbsoft_priv *adapter) // Notify the HAL rate is changing 20060613.1

{

	phw_data_t pHwData = &adapter->sHwData;

	u8		rate = CURRENT_TX_RATE;



	BBProcessor_RateChanging( pHwData, rate );

}



void hal_set_rf_power(phw_data_t pHwData, u8 PowerIndex)

void hal_set_rf_power(phw_data_t pHwData, u8 PowerIndex)

{

{

	RFSynthesizer_SetPowerIndex( pHwData, PowerIndex );

	RFSynthesizer_SetPowerIndex( pHwData, PowerIndex );

}
 
}
 


unsigned char hal_set_LED(phw_data_t pHwData, u32 Mode) // 20061108 for WPS led control

{

	pHwData->LED_Blinking = 0;

	pHwData->LED_control = Mode;

	pHwData->LEDTimer.expires = jiffies + msecs_to_jiffies(10);

	add_timer(&pHwData->LEDTimer);

	return true;

}

drivers/staging/winbond/wbhal_f.h

+0 −22
Original line number Original line Diff line number Diff line
@@ -26,9 +26,6 @@ void hal_set_power_save_mode( phw_data_t pHwData, unsigned char power_save, u 
void hal_get_power_save_mode(  phw_data_t pHwData,   u8 *pin_pwr_save );

void hal_get_power_save_mode(  phw_data_t pHwData,   u8 *pin_pwr_save );

void hal_set_slot_time(  phw_data_t pHwData,  u8 type );

void hal_set_slot_time(  phw_data_t pHwData,  u8 type );

#define hal_set_atim_window( _A, _ATM )

#define hal_set_atim_window( _A, _ATM )

void hal_set_rates(  phw_data_t pHwData,  u8 *pbss_rates,  u8 length,  unsigned char basic_rate_set );

#define hal_set_basic_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, TRUE )

#define hal_set_op_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, FALSE )

void hal_start_bss(  phw_data_t pHwData,  u8 mac_op_mode );

void hal_start_bss(  phw_data_t pHwData,  u8 mac_op_mode );

void hal_join_request(  phw_data_t pHwData,  u8 bss_type ); // 0:BSS STA 1:IBSS STA//

void hal_join_request(  phw_data_t pHwData,  u8 bss_type ); // 0:BSS STA 1:IBSS STA//

void hal_stop_sync_bss(  phw_data_t pHwData );

void hal_stop_sync_bss(  phw_data_t pHwData );
@@ -41,35 +38,23 @@ void hal_set_listen_interval( phw_data_t pHwData, u16 listen_interval ); 
void hal_set_cap_info(  phw_data_t pHwData,  u16 capability_info );

void hal_set_cap_info(  phw_data_t pHwData,  u16 capability_info );

void hal_set_ssid(  phw_data_t pHwData,  u8 *pssid,  u8 ssid_len );

void hal_set_ssid(  phw_data_t pHwData,  u8 *pssid,  u8 ssid_len );

void hal_set_current_channel(  phw_data_t pHwData,  ChanInfo channel );

void hal_set_current_channel(  phw_data_t pHwData,  ChanInfo channel );

void hal_set_current_channel_ex(  phw_data_t pHwData,  ChanInfo channel );

void hal_get_current_channel(  phw_data_t pHwData,  ChanInfo *channel );

void hal_set_accept_broadcast(  phw_data_t pHwData,  u8 enable );

void hal_set_accept_broadcast(  phw_data_t pHwData,  u8 enable );

void hal_set_accept_multicast(  phw_data_t pHwData,  u8 enable );

void hal_set_accept_multicast(  phw_data_t pHwData,  u8 enable );

void hal_set_accept_beacon(  phw_data_t pHwData,  u8 enable );

void hal_set_accept_beacon(  phw_data_t pHwData,  u8 enable );

void hal_set_multicast_address(  phw_data_t pHwData,  u8 *address,  u8 number );

u8 hal_get_accept_beacon(  phw_data_t pHwData );

void hal_stop(  phw_data_t pHwData );

void hal_stop(  phw_data_t pHwData );

void hal_halt(  phw_data_t pHwData, void *ppa_data );

void hal_halt(  phw_data_t pHwData, void *ppa_data );

void hal_start_tx0(  phw_data_t pHwData );

void hal_start_tx0(  phw_data_t pHwData );

void hal_set_phy_type(  phw_data_t pHwData,  u8 PhyType );

void hal_set_phy_type(  phw_data_t pHwData,  u8 PhyType );

void hal_get_phy_type(  phw_data_t pHwData,  u8 *PhyType );

unsigned char hal_reset_hardware(  phw_data_t pHwData,  void* ppa );

void hal_set_cwmin(  phw_data_t pHwData,  u8	cwin_min );

#define hal_get_cwmin( _A ) ( (_A)->cwmin )

#define hal_get_cwmin( _A ) ( (_A)->cwmin )

void hal_set_cwmax(  phw_data_t pHwData,  u16 cwin_max );

void hal_set_cwmax(  phw_data_t pHwData,  u16 cwin_max );

#define hal_get_cwmax( _A ) ( (_A)->cwmax )

#define hal_get_cwmax( _A ) ( (_A)->cwmax )

void hal_set_rsn_wpa(  phw_data_t pHwData,  u32 * RSN_IE_Bitmap , u32 * RSN_OUI_type , unsigned char bDesiredAuthMode);

void hal_set_rsn_wpa(  phw_data_t pHwData,  u32 * RSN_IE_Bitmap , u32 * RSN_OUI_type , unsigned char bDesiredAuthMode);

//s32 hal_get_rssi(  phw_data_t pHwData,  u32 HalRssi );

s32 hal_get_rssi(  phw_data_t pHwData,  u32 *HalRssiArry,  u8 Count );

s32 hal_get_rssi_bss(struct wbsoft_priv *adapter,  u16 idx,  u8 Count);

void hal_set_connect_info(  phw_data_t pHwData,  unsigned char boConnect );

void hal_set_connect_info(  phw_data_t pHwData,  unsigned char boConnect );

u8 hal_get_est_sq3(  phw_data_t pHwData,  u8 Count );

u8 hal_get_est_sq3(  phw_data_t pHwData,  u8 Count );

void hal_set_rf_power(  phw_data_t pHwData,  u8 PowerIndex ); // 20060621 Modify

void hal_set_rf_power(  phw_data_t pHwData,  u8 PowerIndex ); // 20060621 Modify

void hal_reset_counter(  phw_data_t pHwData );

void hal_set_radio_mode(  phw_data_t pHwData,  unsigned char boValue);

void hal_set_radio_mode(  phw_data_t pHwData,  unsigned char boValue);

void hal_descriptor_indicate(  phw_data_t pHwData,  PDESCRIPTOR pDes );

void hal_descriptor_indicate(  phw_data_t pHwData,  PDESCRIPTOR pDes );

u8 hal_get_antenna_number(  phw_data_t pHwData );

u8 hal_get_antenna_number(  phw_data_t pHwData );

void hal_set_antenna_number(  phw_data_t pHwData, u8 number );

u32 hal_get_bss_pk_cnt(  phw_data_t pHwData );

u32 hal_get_bss_pk_cnt(  phw_data_t pHwData );

#define hal_get_region_from_EEPROM( _A ) ( (_A)->reg.EEPROMRegion )

#define hal_get_region_from_EEPROM( _A ) ( (_A)->reg.EEPROMRegion )

void hal_set_accept_promiscuous		(  phw_data_t pHwData,  u8 enable);

void hal_set_accept_promiscuous		(  phw_data_t pHwData,  u8 enable);
@@ -80,20 +65,13 @@ u8 hal_get_hw_radio_off ( phw_data_t pHwData ); 
#define hal_rssi_boundary_high( _A ) (_A->RSSI_high)

#define hal_rssi_boundary_high( _A ) (_A->RSSI_high)

#define hal_rssi_boundary_low( _A ) (_A->RSSI_low)

#define hal_rssi_boundary_low( _A ) (_A->RSSI_low)

#define hal_scan_interval( _A )		(_A->Scan_Interval)

#define hal_scan_interval( _A )		(_A->Scan_Interval)

void hal_scan_status_indicate(  phw_data_t pHwData, u8 status);	// 0: complete, 1: in progress

void hal_system_power_change(  phw_data_t pHwData, u32 PowerState ); // 20051230 -=D0 1=D1 ..

void hal_surprise_remove(struct wbsoft_priv *adapter);





#define PHY_DEBUG( msg, args... )

#define PHY_DEBUG( msg, args... )









void hal_rate_change(struct wbsoft_priv *adapter); // Notify the HAL rate is changing 20060613.1

unsigned char hal_get_dxx_reg(  phw_data_t pHwData,  u16 number,  u32 * pValue );

unsigned char hal_get_dxx_reg(  phw_data_t pHwData,  u16 number,  u32 * pValue );

unsigned char hal_set_dxx_reg(  phw_data_t pHwData,  u16 number,  u32 value );

unsigned char hal_set_dxx_reg(  phw_data_t pHwData,  u16 number,  u32 value );

#define hal_get_time_count( _P )	(_P->time_count/10)	// return 100ms count

#define hal_get_time_count( _P )	(_P->time_count/10)	// return 100ms count

#define hal_detect_error( _P )		(_P->WbUsb.DetectCount)

#define hal_detect_error( _P )		(_P->WbUsb.DetectCount)

unsigned char hal_set_LED(  phw_data_t pHwData,  u32 Mode ); // 20061108 for WPS led control





//-------------------------------------------------------------------------

//-------------------------------------------------------------------------

// The follow function is unused for IS89C35

// The follow function is unused for IS89C35