Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7a7e780c authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch 'phy-next' 



Andrew Lunn says:

====================
PHY Kconfig and Makefile cleanup

The Ethernet PHY directory has slowly been getting more entries.
Split the entries in the Makefile and Kconfig into MDIO bus drivers
and PHYs. Within these two groups, sort them. This should reduce merge
conflicts and aid finding what one searches for.

The Kconfig text contains redundant "Driver for" and "Support for"
which add little value, make the vendor less obvious, and defeat the
shortcut key in the menu. Remove such text.
====================

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents d985d151 97c84389

drivers/net/phy/Kconfig

+220 −219
Original line number Original line Diff line number Diff line
@@ -15,152 +15,218 @@ if PHYLIB 
config SWPHY

config SWPHY

	bool

	bool





comment "MII PHY device drivers"

comment "MDIO bus device drivers"





config AQUANTIA_PHY

config MDIO_BCM_IPROC

        tristate "Drivers for the Aquantia PHYs"

	tristate "Broadcom iProc MDIO bus controller"

        ---help---

	depends on ARCH_BCM_IPROC || COMPILE_TEST

          Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405

	depends on HAS_IOMEM && OF_MDIO

	help

	  This module provides a driver for the MDIO busses found in the

	  Broadcom iProc SoC's.





config AT803X_PHY

config MDIO_BCM_UNIMAC

	tristate "Drivers for Atheros AT803X PHYs"

	tristate "Broadcom UniMAC MDIO bus controller"

	---help---

	depends on HAS_IOMEM

	  Currently supports the AT8030 and AT8035 model

	help

	  This module provides a driver for the Broadcom UniMAC MDIO busses.

	  This hardware can be found in the Broadcom GENET Ethernet MAC

	  controllers as well as some Broadcom Ethernet switches such as the

	  Starfighter 2 switches.





config AMD_PHY

config MDIO_BITBANG

	tristate "Drivers for the AMD PHYs"

	tristate "Bitbanged MDIO buses"

	---help---

	help

	  Currently supports the am79c874

	  This module implements the MDIO bus protocol in software,

	  for use by low level drivers that export the ability to

	  drive the relevant pins.





config MARVELL_PHY

	  If in doubt, say N.

	tristate "Drivers for Marvell PHYs"

	---help---

	  Currently has a driver for the 88E1011S





config DAVICOM_PHY

config MDIO_BUS_MUX

	tristate "Drivers for Davicom PHYs"

	tristate

	---help---

	depends on OF_MDIO

	  Currently supports dm9161e and dm9131

	help

	  This module provides a driver framework for MDIO bus

	  multiplexers which connect one of several child MDIO busses

	  to a parent bus.  Switching between child busses is done by

	  device specific drivers.





config QSEMI_PHY

config MDIO_BUS_MUX_BCM_IPROC

	tristate "Drivers for Quality Semiconductor PHYs"

	tristate "Broadcom iProc based MDIO bus multiplexers"

	---help---

	depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)

	  Currently supports the qs6612

	select MDIO_BUS_MUX

	default ARCH_BCM_IPROC

	help

	  This module provides a driver for MDIO bus multiplexers found in

	  iProc based Broadcom SoCs. This multiplexer connects one of several

	  child MDIO bus to a parent bus. Buses could be internal as well as

	  external and selection logic lies inside the same multiplexer.





config LXT_PHY

config MDIO_BUS_MUX_GPIO

	tristate "Drivers for the Intel LXT PHYs"

	tristate "GPIO controlled MDIO bus multiplexers"

	---help---

	depends on OF_GPIO && OF_MDIO

	  Currently supports the lxt970, lxt971

	select MDIO_BUS_MUX

	help

	  This module provides a driver for MDIO bus multiplexers that

	  are controlled via GPIO lines.  The multiplexer connects one of

	  several child MDIO busses to a parent bus.  Child bus

	  selection is under the control of GPIO lines.





config CICADA_PHY

config MDIO_BUS_MUX_MMIOREG

	tristate "Drivers for the Cicada PHYs"

	tristate "MMIO device-controlled MDIO bus multiplexers"

	---help---

	depends on OF_MDIO && HAS_IOMEM

	  Currently supports the cis8204

	select MDIO_BUS_MUX

	help

	  This module provides a driver for MDIO bus multiplexers that

	  are controlled via a simple memory-mapped device, like an FPGA.

	  The multiplexer connects one of several child MDIO busses to a

	  parent bus.  Child bus selection is under the control of one of

	  the FPGA's registers.





config VITESSE_PHY

	  Currently, only 8-bit registers are supported.

        tristate "Drivers for the Vitesse PHYs"

        ---help---

          Currently supports the vsc8244





config TERANETICS_PHY

config MDIO_CAVIUM

        tristate "Drivers for the Teranetics PHYs"

	tristate

        ---help---

          Currently supports the Teranetics TN2020





config SMSC_PHY

config MDIO_GPIO

	tristate "Drivers for SMSC PHYs"

	tristate "GPIO lib-based bitbanged MDIO buses"

	depends on MDIO_BITBANG && GPIOLIB

	---help---

	---help---

	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs

	  Supports GPIO lib-based MDIO busses.





config BCM_NET_PHYLIB

	  To compile this driver as a module, choose M here: the module

	tristate

	  will be called mdio-gpio.





config BROADCOM_PHY

config MDIO_HISI_FEMAC

	tristate "Drivers for Broadcom PHYs"

	tristate "Hisilicon FEMAC MDIO bus controller"

	select BCM_NET_PHYLIB

	depends on HAS_IOMEM && OF_MDIO

	help

	  This module provides a driver for the MDIO busses found in the

	  Hisilicon SoC that have an Fast Ethernet MAC.



config MDIO_MOXART

        tristate "MOXA ART MDIO interface support"

        depends on ARCH_MOXART

        help

          This driver supports the MDIO interface found in the network

          interface units of the MOXA ART SoC



config MDIO_OCTEON

	tristate "Octeon and some ThunderX SOCs MDIO buses"

	depends on 64BIT

	depends on HAS_IOMEM

	select MDIO_CAVIUM

	help

	  This module provides a driver for the Octeon and ThunderX MDIO

	  buses. It is required by the Octeon and ThunderX ethernet device

	  drivers on some systems.



config MDIO_SUN4I

	tristate "Allwinner sun4i MDIO interface support"

	depends on ARCH_SUNXI

	help

	  This driver supports the MDIO interface found in the network

	  interface units of the Allwinner SoC that have an EMAC (A10,

	  A12, A10s, etc.)



config MDIO_THUNDER

	tristate "ThunderX SOCs MDIO buses"

	depends on 64BIT

	depends on PCI

	select MDIO_CAVIUM

	help

	  This driver supports the MDIO interfaces found on Cavium

	  ThunderX SoCs when the MDIO bus device appears as a PCI

	  device.



config MDIO_XGENE

	tristate "APM X-Gene SoC MDIO bus controller"

	help

	  This module provides a driver for the MDIO busses found in the

	  APM X-Gene SoC's.



comment "MII PHY device drivers"



config AMD_PHY

	tristate "AMD PHYs"

	---help---

	---help---

	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,

	  Currently supports the am79c874

	  BCM5481 and BCM5482 PHYs.





config BCM_CYGNUS_PHY

config AQUANTIA_PHY

	tristate "Drivers for Broadcom Cygnus SoC internal PHY"

        tristate "Aquantia PHYs"

	depends on ARCH_BCM_CYGNUS || COMPILE_TEST

	depends on MDIO_BCM_IPROC

	select BCM_NET_PHYLIB

        ---help---

        ---help---

	  This PHY driver is for the 1G internal PHYs of the Broadcom

          Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405

	  Cygnus Family SoC.





	  Currently supports internal PHY's used in the BCM11300,

config AT803X_PHY

	  BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,

	tristate "AT803X PHYs"

	  BCM58303 & BCM58305 Broadcom Cygnus SoCs.

	---help---

	  Currently supports the AT8030 and AT8035 model





config BCM63XX_PHY

config BCM63XX_PHY

	tristate "Drivers for Broadcom 63xx SOCs internal PHY"

	tristate "Broadcom 63xx SOCs internal PHY"

	depends on BCM63XX

	depends on BCM63XX

	select BCM_NET_PHYLIB

	select BCM_NET_PHYLIB

	---help---

	---help---

	  Currently supports the 6348 and 6358 PHYs.

	  Currently supports the 6348 and 6358 PHYs.





config BCM7XXX_PHY

config BCM7XXX_PHY

	tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"

	tristate "Broadcom 7xxx SOCs internal PHYs"

	select BCM_NET_PHYLIB

	select BCM_NET_PHYLIB

	---help---

	---help---

	  Currently supports the BCM7366, BCM7439, BCM7445, and

	  Currently supports the BCM7366, BCM7439, BCM7445, and

	  40nm and 65nm generation of BCM7xxx Set Top Box SoCs.

	  40nm and 65nm generation of BCM7xxx Set Top Box SoCs.





config BCM87XX_PHY

config BCM87XX_PHY

	tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"

	tristate "Broadcom BCM8706 and BCM8727 PHYs"

	help

	help

	  Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.

	  Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.





config ICPLUS_PHY

config BCM_CYGNUS_PHY

	tristate "Drivers for ICPlus PHYs"

	tristate "Broadcom Cygnus SoC internal PHY"

	depends on ARCH_BCM_CYGNUS || COMPILE_TEST

	depends on MDIO_BCM_IPROC

	select BCM_NET_PHYLIB

	---help---

	---help---

	  Currently supports the IP175C and IP1001 PHYs.

	  This PHY driver is for the 1G internal PHYs of the Broadcom

	  Cygnus Family SoC.





config REALTEK_PHY

	  Currently supports internal PHY's used in the BCM11300,

	tristate "Drivers for Realtek PHYs"

	  BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,

	---help---

	  BCM58303 & BCM58305 Broadcom Cygnus SoCs.

	  Supports the Realtek 821x PHY.





config NATIONAL_PHY

config BCM_NET_PHYLIB

	tristate "Drivers for National Semiconductor PHYs"

	tristate

	---help---

	  Currently supports the DP83865 PHY.





config STE10XP

config BROADCOM_PHY

	tristate "Driver for STMicroelectronics STe10Xp PHYs"

	tristate "Broadcom PHYs"

	select BCM_NET_PHYLIB

	---help---

	---help---

	  This is the driver for the STe100p and STe101p PHYs.

	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,

	  BCM5481 and BCM5482 PHYs.





config LSI_ET1011C_PHY

config CICADA_PHY

	tristate "Driver for LSI ET1011C PHY"

	tristate "Cicada PHYs"

	---help---

	---help---

	  Supports the LSI ET1011C PHY.

	  Currently supports the cis8204





config MICREL_PHY

config DAVICOM_PHY

	tristate "Driver for Micrel PHYs"

	tristate "Davicom PHYs"

	---help---

	---help---

	  Supports the KSZ9021, VSC8201, KS8001 PHYs.

	  Currently supports dm9161e and dm9131





config DP83848_PHY

config DP83848_PHY

	tristate "Driver for Texas Instruments DP83848 PHY"

	tristate "Texas Instruments DP83848 PHY"

	---help---

	---help---

	  Supports the DP83848 PHY.

	  Supports the DP83848 PHY.





config DP83867_PHY

config DP83867_PHY

	tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"

	tristate "Texas Instruments DP83867 Gigabit PHY"

	---help---

	---help---

	  Currently supports the DP83867 PHY.

	  Currently supports the DP83867 PHY.





config MICROCHIP_PHY

	tristate "Drivers for Microchip PHYs"

	help

	  Supports the LAN88XX PHYs.



config FIXED_PHY

config FIXED_PHY

	tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"

	tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"

	depends on PHYLIB

	depends on PHYLIB

	select SWPHY

	select SWPHY

	---help---

	---help---
@@ -169,148 +235,83 @@ config FIXED_PHY 




	  Currently tested with mpc866ads and mpc8349e-mitx.

	  Currently tested with mpc866ads and mpc8349e-mitx.





config MDIO_BITBANG

config ICPLUS_PHY

	tristate "Support for bitbanged MDIO buses"

	tristate "ICPlus PHYs"

	help

	  This module implements the MDIO bus protocol in software,

	  for use by low level drivers that export the ability to

	  drive the relevant pins.



	  If in doubt, say N.



config MDIO_GPIO

	tristate "Support for GPIO lib-based bitbanged MDIO buses"

	depends on MDIO_BITBANG && GPIOLIB

	---help---

	---help---

	  Supports GPIO lib-based MDIO busses.

	  Currently supports the IP175C and IP1001 PHYs.



	  To compile this driver as a module, choose M here: the module

	  will be called mdio-gpio.



config MDIO_CAVIUM

	tristate



config MDIO_OCTEON

	tristate "Support for MDIO buses on Octeon and some ThunderX SOCs"

	depends on 64BIT

	depends on HAS_IOMEM

	select MDIO_CAVIUM

	help

	  This module provides a driver for the Octeon and ThunderX MDIO

	  buses. It is required by the Octeon and ThunderX ethernet device

	  drivers on some systems.



config MDIO_THUNDER

	tristate "Support for MDIO buses on ThunderX SOCs"

	depends on 64BIT

	depends on PCI

	select MDIO_CAVIUM

	help

	  This driver supports the MDIO interfaces found on Cavium

	  ThunderX SoCs when the MDIO bus device appears as a PCI

	  device.





config INTEL_XWAY_PHY

	tristate "Intel XWAY PHYs"

	---help---

	  Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.

	  These PHYs are marked as standalone chips under the names

	  PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel

	  SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.





config MDIO_SUN4I

config LSI_ET1011C_PHY

	tristate "Allwinner sun4i MDIO interface support"

	tristate "LSI ET1011C PHY"

	depends on ARCH_SUNXI

	---help---

	help

	  Supports the LSI ET1011C PHY.

	  This driver supports the MDIO interface found in the network

	  interface units of the Allwinner SoC that have an EMAC (A10,

	  A12, A10s, etc.)





config MDIO_MOXART

config LXT_PHY

        tristate "MOXA ART MDIO interface support"

	tristate "Intel LXT PHYs"

        depends on ARCH_MOXART

	---help---

        help

	  Currently supports the lxt970, lxt971

          This driver supports the MDIO interface found in the network

          interface units of the MOXA ART SoC





config MDIO_BUS_MUX

config MARVELL_PHY

	tristate

	tristate "Marvell PHYs"

	depends on OF_MDIO

	---help---

	help

	  Currently has a driver for the 88E1011S

	  This module provides a driver framework for MDIO bus

	  multiplexers which connect one of several child MDIO busses

	  to a parent bus.  Switching between child busses is done by

	  device specific drivers.





config MDIO_BUS_MUX_GPIO

config MICREL_PHY

	tristate "Support for GPIO controlled MDIO bus multiplexers"

	tristate "Micrel PHYs"

	depends on OF_GPIO && OF_MDIO

	---help---

	select MDIO_BUS_MUX

	  Supports the KSZ9021, VSC8201, KS8001 PHYs.

	help

	  This module provides a driver for MDIO bus multiplexers that

	  are controlled via GPIO lines.  The multiplexer connects one of

	  several child MDIO busses to a parent bus.  Child bus

	  selection is under the control of GPIO lines.





config MDIO_BUS_MUX_MMIOREG

config MICROCHIP_PHY

	tristate "Support for MMIO device-controlled MDIO bus multiplexers"

	tristate "Microchip PHYs"

	depends on OF_MDIO && HAS_IOMEM

	select MDIO_BUS_MUX

	help

	help

	  This module provides a driver for MDIO bus multiplexers that

	  Supports the LAN88XX PHYs.

	  are controlled via a simple memory-mapped device, like an FPGA.

	  The multiplexer connects one of several child MDIO busses to a

	  parent bus.  Child bus selection is under the control of one of

	  the FPGA's registers.





	  Currently, only 8-bit registers are supported.

config MICROSEMI_PHY

    tristate "Microsemi PHYs"

    ---help---

      Currently supports the VSC8531 and VSC8541 PHYs





config MDIO_BUS_MUX_BCM_IPROC

config NATIONAL_PHY

	tristate "Support for iProc based MDIO bus multiplexers"

	tristate "National Semiconductor PHYs"

	depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)

	---help---

	select MDIO_BUS_MUX

	  Currently supports the DP83865 PHY.

	default ARCH_BCM_IPROC

	help

	  This module provides a driver for MDIO bus multiplexers found in

	  iProc based Broadcom SoCs. This multiplexer connects one of several

	  child MDIO bus to a parent bus. Buses could be internal as well as

	  external and selection logic lies inside the same multiplexer.





config MDIO_BCM_UNIMAC

config QSEMI_PHY

	tristate "Broadcom UniMAC MDIO bus controller"

	tristate "Quality Semiconductor PHYs"

	depends on HAS_IOMEM

	---help---

	help

	  Currently supports the qs6612

	  This module provides a driver for the Broadcom UniMAC MDIO busses.

	  This hardware can be found in the Broadcom GENET Ethernet MAC

	  controllers as well as some Broadcom Ethernet switches such as the

	  Starfighter 2 switches.





config MDIO_BCM_IPROC

config REALTEK_PHY

	tristate "Broadcom iProc MDIO bus controller"

	tristate "Realtek PHYs"

	depends on ARCH_BCM_IPROC || COMPILE_TEST

	---help---

	depends on HAS_IOMEM && OF_MDIO

	  Supports the Realtek 821x PHY.

	help

	  This module provides a driver for the MDIO busses found in the

	  Broadcom iProc SoC's.





config INTEL_XWAY_PHY

config SMSC_PHY

	tristate "Driver for Intel XWAY PHYs"

	tristate "SMSC PHYs"

	---help---

	---help---

	  Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.

	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs

	  These PHYs are marked as standalone chips under the names

	  PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel

	  SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.





config MDIO_HISI_FEMAC

config STE10XP

	tristate "Hisilicon FEMAC MDIO bus controller"

	tristate "STMicroelectronics STe10Xp PHYs"

	depends on HAS_IOMEM && OF_MDIO

	---help---

	help

	  This is the driver for the STe100p and STe101p PHYs.

	  This module provides a driver for the MDIO busses found in the

	  Hisilicon SoC that have an Fast Ethernet MAC.





config MDIO_XGENE

config TERANETICS_PHY

	tristate "APM X-Gene SoC MDIO bus controller"

        tristate "Teranetics PHYs"

	help

        ---help---

	  This module provides a driver for the MDIO busses found in the

          Currently supports the Teranetics TN2020

	  APM X-Gene SoC's.





config MICROSEMI_PHY

config VITESSE_PHY

    tristate "Drivers for the Microsemi PHYs"

        tristate "Vitesse PHYs"

        ---help---

        ---help---

      Currently supports the VSC8531 and VSC8541 PHYs

          Currently supports the vsc8244





config XILINX_GMII2RGMII

config XILINX_GMII2RGMII

       tristate "Xilinx GMII2RGMII converter driver"

       tristate "Xilinx GMII2RGMII converter driver"

drivers/net/phy/Makefile

+39 −37
Original line number Original line Diff line number Diff line 
# Makefile for Linux PHY drivers

# Makefile for Linux PHY drivers and MDIO bus drivers





libphy-y			:= phy.o phy_device.o mdio_bus.o mdio_device.o

libphy-y			:= phy.o phy_device.o mdio_bus.o mdio_device.o

libphy-$(CONFIG_SWPHY)		+= swphy.o

libphy-$(CONFIG_SWPHY)		+= swphy.o





obj-$(CONFIG_PHYLIB)		+= libphy.o

obj-$(CONFIG_PHYLIB)		+= libphy.o



obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o

obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o

obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o

obj-$(CONFIG_MDIO_BUS_MUX)	+= mdio-mux.o

obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC)	+= mdio-mux-bcm-iproc.o

obj-$(CONFIG_MDIO_BUS_MUX_GPIO)	+= mdio-mux-gpio.o

obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o

obj-$(CONFIG_MDIO_CAVIUM)	+= mdio-cavium.o

obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o

obj-$(CONFIG_MDIO_HISI_FEMAC)	+= mdio-hisi-femac.o

obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o

obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o

obj-$(CONFIG_MDIO_SUN4I)	+= mdio-sun4i.o

obj-$(CONFIG_MDIO_THUNDER)	+= mdio-thunder.o

obj-$(CONFIG_MDIO_XGENE)	+= mdio-xgene.o



obj-$(CONFIG_AMD_PHY)		+= amd.o

obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o

obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o

obj-$(CONFIG_MARVELL_PHY)	+= marvell.o

obj-$(CONFIG_AT803X_PHY)	+= at803x.o

obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o

obj-$(CONFIG_CICADA_PHY)	+= cicada.o

obj-$(CONFIG_LXT_PHY)		+= lxt.o

obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o

obj-$(CONFIG_SMSC_PHY)		+= smsc.o

obj-$(CONFIG_MICROSEMI_PHY) += mscc.o

obj-$(CONFIG_TERANETICS_PHY)	+= teranetics.o

obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o

obj-$(CONFIG_BCM_NET_PHYLIB)	+= bcm-phy-lib.o

obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o

obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o

obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o

obj-$(CONFIG_BCM7XXX_PHY)	+= bcm7xxx.o

obj-$(CONFIG_BCM7XXX_PHY)	+= bcm7xxx.o

obj-$(CONFIG_BCM87XX_PHY)	+= bcm87xx.o

obj-$(CONFIG_BCM87XX_PHY)	+= bcm87xx.o

obj-$(CONFIG_BCM_CYGNUS_PHY)	+= bcm-cygnus.o

obj-$(CONFIG_BCM_CYGNUS_PHY)	+= bcm-cygnus.o

obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o

obj-$(CONFIG_BCM_NET_PHYLIB)	+= bcm-phy-lib.o

obj-$(CONFIG_REALTEK_PHY)	+= realtek.o

obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o

obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o

obj-$(CONFIG_CICADA_PHY)	+= cicada.o

obj-$(CONFIG_FIXED_PHY)		+= fixed_phy.o

obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o

obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o

obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o

obj-$(CONFIG_NATIONAL_PHY)	+= national.o

obj-$(CONFIG_DP83640_PHY)	+= dp83640.o

obj-$(CONFIG_DP83640_PHY)	+= dp83640.o

obj-$(CONFIG_DP83848_PHY)	+= dp83848.o

obj-$(CONFIG_DP83848_PHY)	+= dp83848.o

obj-$(CONFIG_DP83867_PHY)	+= dp83867.o

obj-$(CONFIG_DP83867_PHY)	+= dp83867.o

obj-$(CONFIG_STE10XP)		+= ste10Xp.o

obj-$(CONFIG_FIXED_PHY)		+= fixed_phy.o

obj-$(CONFIG_MICREL_PHY)	+= micrel.o

obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o

obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o

obj-$(CONFIG_INTEL_XWAY_PHY)	+= intel-xway.o

obj-$(CONFIG_MDIO_THUNDER)	+= mdio-thunder.o

obj-$(CONFIG_LSI_ET1011C_PHY)	+= et1011c.o

obj-$(CONFIG_MDIO_CAVIUM)	+= mdio-cavium.o

obj-$(CONFIG_LXT_PHY)		+= lxt.o

obj-$(CONFIG_MARVELL_PHY)	+= marvell.o

obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o

obj-$(CONFIG_MICREL_KS8995MA)	+= spi_ks8995.o

obj-$(CONFIG_AT803X_PHY)	+= at803x.o

obj-$(CONFIG_MICREL_PHY)	+= micrel.o

obj-$(CONFIG_AMD_PHY)		+= amd.o

obj-$(CONFIG_MDIO_BUS_MUX)	+= mdio-mux.o

obj-$(CONFIG_MDIO_BUS_MUX_GPIO)	+= mdio-mux-gpio.o

obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o

obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC)	+= mdio-mux-bcm-iproc.o

obj-$(CONFIG_MDIO_SUN4I)	+= mdio-sun4i.o

obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o

obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o

obj-$(CONFIG_MICROCHIP_PHY)	+= microchip.o

obj-$(CONFIG_MICROCHIP_PHY)	+= microchip.o

obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o

obj-$(CONFIG_MICROSEMI_PHY)	+= mscc.o

obj-$(CONFIG_INTEL_XWAY_PHY)	+= intel-xway.o

obj-$(CONFIG_NATIONAL_PHY)	+= national.o

obj-$(CONFIG_MDIO_HISI_FEMAC)	+= mdio-hisi-femac.o

obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o

obj-$(CONFIG_MDIO_XGENE)	+= mdio-xgene.o

obj-$(CONFIG_REALTEK_PHY)	+= realtek.o

obj-$(CONFIG_SMSC_PHY)		+= smsc.o

obj-$(CONFIG_STE10XP)		+= ste10Xp.o

obj-$(CONFIG_TERANETICS_PHY)	+= teranetics.o

obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o

obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
 
obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o