PCI: iproc: Add PAXC v2 support (787b3c4f) · Commits · e / devices / android_kernel_fairphone_FP4

drivers/pci/host/pcie-iproc-platform.c

+3 −0

Original line number	Diff line number	Diff line
		@@ -33,6 +33,9 @@ static const struct of_device_id iproc_pcie_of_match_table[] = {
		}, {
		.compatible = "brcm,iproc-pcie-paxc",
		.data = (int *)IPROC_PCIE_PAXC,
		}, {
		.compatible = "brcm,iproc-pcie-paxc-v2",
		.data = (int *)IPROC_PCIE_PAXC_V2,
		},
		{ /* sentinel */ }
		};

drivers/pci/host/pcie-iproc.c

+173 −3

Original line number	Diff line number	Diff line
		@@ -21,6 +21,7 @@
		#include <linux/slab.h>
		#include <linux/delay.h>
		#include <linux/interrupt.h>
		#include <linux/irqchip/arm-gic-v3.h>
		#include <linux/platform_device.h>
		#include <linux/of_address.h>
		#include <linux/of_pci.h>
		@@ -38,6 +39,12 @@
		#define RC_PCIE_RST_OUTPUT BIT(RC_PCIE_RST_OUTPUT_SHIFT)
		#define PAXC_RESET_MASK 0x7f

		#define GIC_V3_CFG_SHIFT 0
		#define GIC_V3_CFG BIT(GIC_V3_CFG_SHIFT)

		#define MSI_ENABLE_CFG_SHIFT 0
		#define MSI_ENABLE_CFG BIT(MSI_ENABLE_CFG_SHIFT)

		#define CFG_IND_ADDR_MASK 0x00001ffc

		#define CFG_ADDR_BUS_NUM_SHIFT 20
		@@ -79,6 +86,31 @@ enum iproc_pcie_reg {
		/* clock/reset signal control */
		IPROC_PCIE_CLK_CTRL = 0,

		/*
		* To allow MSI to be steered to an external MSI controller (e.g., ARM
		* GICv3 ITS)
		*/
		IPROC_PCIE_MSI_GIC_MODE,

		/*
		* IPROC_PCIE_MSI_BASE_ADDR and IPROC_PCIE_MSI_WINDOW_SIZE define the
		* window where the MSI posted writes are written, for the writes to be
		* interpreted as MSI writes.
		*/
		IPROC_PCIE_MSI_BASE_ADDR,
		IPROC_PCIE_MSI_WINDOW_SIZE,

		/*
		* To hold the address of the register where the MSI writes are
		* programed. When ARM GICv3 ITS is used, this should be programmed
		* with the address of the GITS_TRANSLATER register.
		*/
		IPROC_PCIE_MSI_ADDR_LO,
		IPROC_PCIE_MSI_ADDR_HI,

		/* enable MSI */
		IPROC_PCIE_MSI_EN_CFG,

		/* allow access to root complex configuration space */
		IPROC_PCIE_CFG_IND_ADDR,
		IPROC_PCIE_CFG_IND_DATA,
		@@ -142,6 +174,20 @@ static const u16 iproc_pcie_reg_paxc[] = {
		[IPROC_PCIE_CFG_DATA] = 0x1fc,
		};

		/* iProc PCIe PAXC v2 registers */
		static const u16 iproc_pcie_reg_paxc_v2[] = {
		[IPROC_PCIE_MSI_GIC_MODE] = 0x050,
		[IPROC_PCIE_MSI_BASE_ADDR] = 0x074,
		[IPROC_PCIE_MSI_WINDOW_SIZE] = 0x078,
		[IPROC_PCIE_MSI_ADDR_LO] = 0x07c,
		[IPROC_PCIE_MSI_ADDR_HI] = 0x080,
		[IPROC_PCIE_MSI_EN_CFG] = 0x09c,
		[IPROC_PCIE_CFG_IND_ADDR] = 0x1f0,
		[IPROC_PCIE_CFG_IND_DATA] = 0x1f4,
		[IPROC_PCIE_CFG_ADDR] = 0x1f8,
		[IPROC_PCIE_CFG_DATA] = 0x1fc,
		};

		static inline struct iproc_pcie iproc_data(struct pci_bus bus)
		{
		struct iproc_pcie *pcie;
		@@ -506,13 +552,131 @@ static int iproc_pcie_map_ranges(struct iproc_pcie *pcie,
		return 0;
		}

		static int iproce_pcie_get_msi(struct iproc_pcie *pcie,
		struct device_node *msi_node,
		u64 *msi_addr)
		{
		struct device *dev = pcie->dev;
		int ret;
		struct resource res;

		/*
		* Check if 'msi-map' points to ARM GICv3 ITS, which is the only
		* supported external MSI controller that requires steering.
		*/
		if (!of_device_is_compatible(msi_node, "arm,gic-v3-its")) {
		dev_err(dev, "unable to find compatible MSI controller\n");
		return -ENODEV;
		}

		/* derive GITS_TRANSLATER address from GICv3 */
		ret = of_address_to_resource(msi_node, 0, &res);
		if (ret < 0) {
		dev_err(dev, "unable to obtain MSI controller resources\n");
		return ret;
		}

		*msi_addr = res.start + GITS_TRANSLATER;
		return 0;
		}

		static void iproc_pcie_paxc_v2_msi_steer(struct iproc_pcie *pcie, u64 msi_addr)
		{
		u32 val;

		/*
		* Program bits [43:13] of address of GITS_TRANSLATER register into
		* bits [30:0] of the MSI base address register. In fact, in all iProc
		* based SoCs, all I/O register bases are well below the 32-bit
		* boundary, so we can safely assume bits [43:32] are always zeros.
		*/
		iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_BASE_ADDR,
		(u32)(msi_addr >> 13));

		/* use a default 8K window size */
		iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_WINDOW_SIZE, 0);

		/* steering MSI to GICv3 ITS */
		val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_GIC_MODE);
		val \|= GIC_V3_CFG;
		iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_GIC_MODE, val);

		/*
		* Program bits [43:2] of address of GITS_TRANSLATER register into the
		* iProc MSI address registers.
		*/
		msi_addr >>= 2;
		iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_ADDR_HI,
		upper_32_bits(msi_addr));
		iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_ADDR_LO,
		lower_32_bits(msi_addr));

		/* enable MSI */
		val = iproc_pcie_read_reg(pcie, IPROC_PCIE_MSI_EN_CFG);
		val \|= MSI_ENABLE_CFG;
		iproc_pcie_write_reg(pcie, IPROC_PCIE_MSI_EN_CFG, val);
		}

		static int iproc_pcie_msi_steer(struct iproc_pcie *pcie,
		struct device_node *msi_node)
		{
		struct device *dev = pcie->dev;
		int ret;
		u64 msi_addr;

		ret = iproce_pcie_get_msi(pcie, msi_node, &msi_addr);
		if (ret < 0) {
		dev_err(dev, "msi steering failed\n");
		return ret;
		}

		switch (pcie->type) {
		case IPROC_PCIE_PAXC_V2:
		iproc_pcie_paxc_v2_msi_steer(pcie, msi_addr);
		break;
		default:
		return -EINVAL;
		}

		return 0;
		}

		static int iproc_pcie_msi_enable(struct iproc_pcie *pcie)
		{
		struct device_node *msi_node;
		int ret;

		/*
		* Either the "msi-parent" or the "msi-map" phandle needs to exist
		* for us to obtain the MSI node.
		*/

		msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0);
		if (!msi_node) {
		const __be32 *msi_map = NULL;
		int len;
		u32 phandle;

		msi_map = of_get_property(pcie->dev->of_node, "msi-map", &len);
		if (!msi_map)
		return -ENODEV;

		phandle = be32_to_cpup(msi_map + 1);
		msi_node = of_find_node_by_phandle(phandle);
		if (!msi_node)
		return -ENODEV;
		}

		/*
		* Certain revisions of the iProc PCIe controller require additional
		* configurations to steer the MSI writes towards an external MSI
		* controller.
		*/
		if (pcie->need_msi_steer) {
		ret = iproc_pcie_msi_steer(pcie, msi_node);
		if (ret)
		return ret;
		}

		/*
		* If another MSI controller is being used, the call below should fail
		@@ -544,6 +708,11 @@ static int iproc_pcie_rev_init(struct iproc_pcie *pcie)
		regs = iproc_pcie_reg_paxc;
		pcie->ep_is_internal = true;
		break;
		case IPROC_PCIE_PAXC_V2:
		regs = iproc_pcie_reg_paxc_v2;
		pcie->ep_is_internal = true;
		pcie->need_msi_steer = true;
		break;
		default:
		dev_err(dev, "incompatible iProc PCIe interface\n");
		return -EINVAL;
		@@ -556,7 +725,8 @@ static int iproc_pcie_rev_init(struct iproc_pcie *pcie)
		return -ENOMEM;

		/* go through the register table and populate all valid registers */
		pcie->reg_offsets[0] = regs[0];
		pcie->reg_offsets[0] = (pcie->type == IPROC_PCIE_PAXC_V2) ?
		IPROC_PCIE_REG_INVALID : regs[0];
		for (reg_idx = 1; reg_idx < IPROC_PCIE_MAX_NUM_REG; reg_idx++)
		pcie->reg_offsets[reg_idx] = regs[reg_idx] ?
		regs[reg_idx] : IPROC_PCIE_REG_INVALID;

drivers/pci/host/pcie-iproc.h

+4 −0

Original line number	Diff line number	Diff line
		@@ -27,6 +27,7 @@ enum iproc_pcie_type {
		IPROC_PCIE_PAXB_BCMA = 0,
		IPROC_PCIE_PAXB,
		IPROC_PCIE_PAXC,
		IPROC_PCIE_PAXC_V2,
		};

		/**
		@@ -61,6 +62,8 @@ struct iproc_msi;
		* unsupported request from being forwarded as an APB bus error
		* @need_ob_cfg: indicates SW needs to configure the outbound mapping window
		* @ob: outbound mapping parameters
		* @need_msi_steer: indicates additional configuration of the iProc PCIe
		* controller is required to steer MSI writes to external interrupt controller
		* @msi: MSI data
		*/
		struct iproc_pcie {
		@@ -79,6 +82,7 @@ struct iproc_pcie {
		bool has_apb_err_disable;
		bool need_ob_cfg;
		struct iproc_pcie_ob ob;
		bool need_msi_steer;
		struct iproc_msi *msi;
		};