cfg80211/nl80211: fix kernel-doc (73c3df3b) · Commits · e / devices / android_kernel_fairphone_FP4

include/linux/nl80211.h

+28 −5

Original line number	Diff line number	Diff line
		@@ -277,6 +277,12 @@
		* @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
		* NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
		*
		* @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
		* (for the BSSID) and %NL80211_ATTR_PMKID.
		* @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
		* (for the BSSID) and %NL80211_ATTR_PMKID.
		* @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
		*
		* @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
		* has been changed and provides details of the request information
		* that caused the change such as who initiated the regulatory request
		@@ -456,6 +462,10 @@
		* the frame.
		* @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for
		* backward compatibility.
		*
		* @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE
		* @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE
		*
		* @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command
		* is used to configure connection quality monitoring notification trigger
		* levels.
		@@ -771,6 +781,13 @@ enum nl80211_commands {
		* section 7.3.2.25.1, e.g. 0x000FAC04)
		* @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and
		* CCMP keys, each six bytes in little endian
		* @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key
		* @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the
		* default management key
		* @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or
		* other commands, indicates which pairwise cipher suites are used
		* @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or
		* other commands, indicates which group cipher suite is used
		*
		* @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU
		* @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing
		@@ -1006,6 +1023,8 @@ enum nl80211_commands {
		* @NL80211_ATTR_ACK: Flag attribute indicating that the frame was
		* acknowledged by the recipient.
		*
		* @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values.
		*
		* @NL80211_ATTR_CQM: connection quality monitor configuration in a
		* nested attribute with %NL80211_ATTR_CQM_* sub-attributes.
		*
		@@ -1063,7 +1082,7 @@ enum nl80211_commands {
		* flag isn't set, the frame will be rejected. This is also used as an
		* nl80211 capability flag.
		*
		* @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16)
		* @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16)
		*
		* @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
		* attributes, specifying what a key should be set as default as.
		@@ -1087,10 +1106,10 @@ enum nl80211_commands {
		* indicate which WoW triggers should be enabled. This is also
		* used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN
		* triggers.

		*
		* @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
		* cycles, in msecs.

		*
		* @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
		* sets of attributes to match during scheduled scans. Only BSSs
		* that match any of the sets will be reported. These are
		@@ -1117,7 +1136,7 @@ enum nl80211_commands {
		* are managed in software: interfaces of these types aren't subject to
		* any restrictions in their number or combinations.
		*
		* @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information
		* @NL80211_ATTR_REKEY_DATA: nested attribute containing the information
		* necessary for GTK rekeying in the device, see &enum nl80211_rekey_data.
		*
		* @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan,
		@@ -1184,7 +1203,6 @@ enum nl80211_commands {
		* @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from
		* &enum nl80211_feature_flags and is advertised in wiphy information.
		* @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe
		*
		* requests while operating in AP-mode.
		* This attribute holds a bitmap of the supported protocols for
		* offloading (see &enum nl80211_probe_resp_offload_support_attr).
		@@ -2507,6 +2525,11 @@ enum nl80211_band {
		NL80211_BAND_5GHZ,
		};

		/**
		* enum nl80211_ps_state - powersave state
		* @NL80211_PS_DISABLED: powersave is disabled
		* @NL80211_PS_ENABLED: powersave is enabled
		*/
		enum nl80211_ps_state {
		NL80211_PS_DISABLED,
		NL80211_PS_ENABLED,

include/net/cfg80211.h

+4 −4

Original line number	Diff line number	Diff line
		@@ -627,10 +627,10 @@ struct sta_bss_parameters {
		* @llid: mesh local link id
		* @plid: mesh peer link id
		* @plink_state: mesh peer link state
		* @signal: the signal strength, type depends on the wiphy's signal_type
		NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
		* @signal_avg: avg signal strength, type depends on the wiphy's signal_type
		NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
		* @signal: The signal strength, type depends on the wiphy's signal_type.
		* For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
		* @signal_avg: Average signal strength, type depends on the wiphy's signal_type.
		* For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_.
		* @txrate: current unicast bitrate from this station
		* @rxrate: current unicast bitrate to this station
		* @rx_packets: packets received from this station