Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6fd1af4c authored by Claudio Scordino's avatar Claudio Scordino Committed by Linus Torvalds
Browse files

tty: Use the generic RS485 ioctl on CRIS 



Use the new general RS485 Linux data structure (introduced by Alan with
commit number c26c56c0) in the Cris
architecture too (currently, Cris still uses the old private data
structure instead of the new one).

Signed-off-by: default avatarClaudio Scordino <claudio@evidence.eu.com>
Tested-by: default avatarHinko Kocevar <hinko.kocevar@cetrtapot.si>
Tested-by: default avatarJanez Cufer <janez.cufer@cetrtapot.si>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent f786ddd2

arch/cris/include/asm/ioctls.h

+3 −2
Original line number Diff line number Diff line
@@ -74,8 +74,9 @@ 
#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */

#define FIOQSIZE	0x5460



#define TIOCSERSETRS485 0x5461  /* enable rs-485 */

#define TIOCSERSETRS485	0x5461  /* enable rs-485 (deprecated) */

#define TIOCSERWRRS485	0x5462  /* write rs-485 */

#define TIOCSRS485	0x5463  /* enable rs-485 */



/* Used for packet mode */

#define TIOCPKT_DATA		 0

arch/cris/include/asm/rs485.h

+3 −5
Original line number Diff line number Diff line 
/* RS-485 structures */



/* RS-485 support */

/* Used with ioctl() TIOCSERSETRS485 */

/* Used with ioctl() TIOCSERSETRS485 for backward compatibility!

 * XXX: Do not use it for new code!

 */

struct rs485_control {

        unsigned short rts_on_send;

        unsigned short rts_after_sent;

        unsigned long delay_rts_before_send;

        unsigned short enabled;

#ifdef __KERNEL__

        int disable_serial_loopback;

#endif

};



/* Used with ioctl() TIOCSERWRRS485 */

arch/cris/include/asm/termios.h

+1 −0
Original line number Diff line number Diff line
@@ -4,6 +4,7 @@ 
#include <asm/termbits.h>

#include <asm/ioctls.h>

#include <asm/rs485.h>

#include <linux/serial.h>



struct winsize {

	unsigned short ws_row;

drivers/serial/crisv10.c

+58 −21
Original line number Diff line number Diff line
@@ -1391,7 +1391,7 @@ static inline void e100_disable_rx_irq(struct e100_serial *info) 
#if defined(CONFIG_ETRAX_RS485)

/* Enable RS-485 mode on selected port. This is UGLY. */

static int

e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r)

e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r)

{

	struct e100_serial * info = (struct e100_serial *)tty->driver_data;
@@ -1409,13 +1409,11 @@ e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r) 
		       CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1);

#endif



	info->rs485.rts_on_send = 0x01 & r->rts_on_send;

	info->rs485.rts_after_sent = 0x01 & r->rts_after_sent;

	info->rs485.flags = r->flags;

	if (r->delay_rts_before_send >= 1000)

		info->rs485.delay_rts_before_send = 1000;

	else

		info->rs485.delay_rts_before_send = r->delay_rts_before_send;

	info->rs485.enabled = r->enabled;

/*	printk("rts: on send = %i, after = %i, enabled = %i",

		    info->rs485.rts_on_send,

		    info->rs485.rts_after_sent,
@@ -1430,17 +1428,18 @@ e100_write_rs485(struct tty_struct *tty, 
                 const unsigned char *buf, int count)

{

	struct e100_serial * info = (struct e100_serial *)tty->driver_data;

	int old_enabled = info->rs485.enabled;

	int old_value = (info->rs485.flags) & SER_RS485_ENABLED;



	/* rs485 is always implicitly enabled if we're using the ioctl()

	 * but it doesn't have to be set in the rs485_control

	 * but it doesn't have to be set in the serial_rs485

	 * (to be backward compatible with old apps)

	 * So we store, set and restore it.

	 */

	info->rs485.enabled = 1;

	info->rs485.flags |= SER_RS485_ENABLED;

	/* rs_write now deals with RS485 if enabled */

	count = rs_write(tty, buf, count);

	info->rs485.enabled = old_enabled;

	if (!old_value)

		info->rs485.flags &= ~(SER_RS485_ENABLED);

	return count;

}
@@ -1451,7 +1450,7 @@ static void rs485_toggle_rts_timer_function(unsigned long data) 
	struct e100_serial *info = (struct e100_serial *)data;



	fast_timers_rs485[info->line].function = NULL;

	e100_rts(info, info->rs485.rts_after_sent);

	e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));

#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)

	e100_enable_rx(info);

	e100_enable_rx_irq(info);
@@ -1647,7 +1646,7 @@ transmit_chars_dma(struct e100_serial *info) 
		info->tr_running = 0;



#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)

		if (info->rs485.enabled) {

		if (info->rs485.flags & SER_RS485_ENABLED) {

			/* Set a short timer to toggle RTS */

			start_one_shot_timer(&fast_timers_rs485[info->line],

			                     rs485_toggle_rts_timer_function,
@@ -2577,7 +2576,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) 
	info->icount.tx++;

	if (info->xmit.head == info->xmit.tail) {

#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)

		if (info->rs485.enabled) {

		if (info->rs485.flags & SER_RS485_ENABLED) {

			/* Set a short timer to toggle RTS */

			start_one_shot_timer(&fast_timers_rs485[info->line],

			                     rs485_toggle_rts_timer_function,
@@ -3218,7 +3217,7 @@ rs_write(struct tty_struct *tty, 
#if defined(CONFIG_ETRAX_RS485)

	struct e100_serial *info = (struct e100_serial *)tty->driver_data;



	if (info->rs485.enabled)

	if (info->rs485.flags & SER_RS485_ENABLED)

	{

		/* If we are in RS-485 mode, we need to toggle RTS and disable

		 * the receiver before initiating a DMA transfer
@@ -3228,7 +3227,7 @@ rs_write(struct tty_struct *tty, 
		fast_timers_rs485[info->line].function = NULL;

		del_fast_timer(&fast_timers_rs485[info->line]);

#endif

		e100_rts(info, info->rs485.rts_on_send);

		e100_rts(info, (info->rs485.flags & SER_RS485_RTS_ON_SEND));

#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)

		e100_disable_rx(info);

		e100_enable_rx_irq(info);
@@ -3242,7 +3241,7 @@ rs_write(struct tty_struct *tty, 
	count = rs_raw_write(tty, buf, count);



#if defined(CONFIG_ETRAX_RS485)

	if (info->rs485.enabled)

	if (info->rs485.flags & SER_RS485_ENABLED)

	{

		unsigned int val;

		/* If we are in RS-485 mode the following has to be done:
@@ -3263,7 +3262,7 @@ rs_write(struct tty_struct *tty, 
			get_lsr_info(info, &val);

		}while (!(val & TIOCSER_TEMT));



		e100_rts(info, info->rs485.rts_after_sent);

		e100_rts(info, (info->rs485.flags & SER_RS485_RTS_AFTER_SEND));



#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)

		e100_enable_rx(info);
@@ -3678,14 +3677,52 @@ rs_ioctl(struct tty_struct *tty, struct file * file, 
#if defined(CONFIG_ETRAX_RS485)

	case TIOCSERSETRS485:

	{

		/* In this ioctl we still use the old structure

		 * rs485_control for backward compatibility

		 * (if we use serial_rs485, then old user-level code

		 * wouldn't work anymore...).

		 * The use of this ioctl is deprecated: use TIOCSRS485

		 * instead.*/

		struct rs485_control rs485ctrl;

		struct serial_rs485 rs485data;

		printk(KERN_DEBUG "The use of this ioctl is deprecated. Use TIOCSRS485 instead\n");

		if (copy_from_user(&rs485ctrl, (struct rs485_control *)arg,

				sizeof(rs485ctrl)))

			return -EFAULT;



		return e100_enable_rs485(tty, &rs485ctrl);

		rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send;

		rs485data.flags = 0;

		if (rs485ctrl.enabled)

			rs485data.flags |= SER_RS485_ENABLED;

		else

			rs485data.flags &= ~(SER_RS485_ENABLED);



		if (rs485ctrl.rts_on_send)

			rs485data.flags |= SER_RS485_RTS_ON_SEND;

		else

			rs485data.flags &= ~(SER_RS485_RTS_ON_SEND);



		if (rs485ctrl.rts_after_sent)

			rs485data.flags |= SER_RS485_RTS_AFTER_SEND;

		else

			rs485data.flags &= ~(SER_RS485_RTS_AFTER_SEND);



		return e100_enable_rs485(tty, &rs485data);

	}



	case TIOCSRS485:

	{

		/* This is the new version of TIOCSRS485, with new

		 * data structure serial_rs485 */

		struct serial_rs485 rs485data;

		if (copy_from_user(&rs485data, (struct rs485_control *)arg,

				sizeof(rs485data)))

			return -EFAULT;



		return e100_enable_rs485(tty, &rs485data);

	}





	case TIOCSERWRRS485:

	{

		struct rs485_write rs485wr;
@@ -3827,8 +3864,8 @@ rs_close(struct tty_struct *tty, struct file * filp) 
	/* port closed */



#if defined(CONFIG_ETRAX_RS485)

	if (info->rs485.enabled) {

		info->rs485.enabled = 0;

	if (info->rs485.flags & SER_RS485_ENABLED) {

		info->rs485.flags &= ~(SER_RS485_ENABLED);

#if defined(CONFIG_ETRAX_RS485_ON_PA)

		*R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit);

#endif
@@ -4493,10 +4530,10 @@ rs_init(void) 


#if defined(CONFIG_ETRAX_RS485)

		/* Set sane defaults */

		info->rs485.rts_on_send = 0;

		info->rs485.rts_after_sent = 1;

		info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND);

		info->rs485.flags |= SER_RS485_RTS_AFTER_SEND;

		info->rs485.delay_rts_before_send = 0;

		info->rs485.enabled = 0;

		info->rs485.flags &= ~(SER_RS485_ENABLED);

#endif

		INIT_WORK(&info->work, do_softint);

drivers/serial/crisv10.h

+1 −1
Original line number Diff line number Diff line
@@ -125,7 +125,7 @@ struct e100_serial { 
	int errorcode;



#ifdef CONFIG_ETRAX_RS485

	struct rs485_control	rs485;  /* RS-485 support */

	struct serial_rs485	rs485;  /* RS-485 support */

#endif

};