Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6f65daed authored by Bjorn Helgaas's avatar Bjorn Helgaas
Browse files

Merge branch 'pci/host-faraday' into next 

* pci/host-faraday:
  PCI: faraday: Add clock handling
  PCI: faraday: Add clock bindings
parents ecf75c46 2eeb02b2

Documentation/devicetree/bindings/pci/faraday,ftpci100.txt

+7 −0
Original line number Diff line number Diff line
@@ -30,6 +30,13 @@ Mandatory properties: 
  128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as

  pre-fetchable.



Optional properties:

- clocks: when present, this should contain the peripheral clock (PCLK) and the

  PCI clock (PCICLK). If these are not present, they are assumed to be

  hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz.

- clock-names: when present, this should contain "PCLK" for the peripheral

  clock and "PCICLK" for the PCI-side clock.



Mandatory subnodes:

- For "faraday,ftpci100" a node representing the interrupt-controller inside the

  host bridge is mandatory. It has the following mandatory properties:

drivers/pci/host/pci-ftpci100.c

+56 −0
Original line number Diff line number Diff line
@@ -25,6 +25,7 @@ 
#include <linux/irqchip/chained_irq.h>

#include <linux/bitops.h>

#include <linux/irq.h>

#include <linux/clk.h>



/*

 * Special configuration registers directly in the first few words
@@ -37,6 +38,7 @@ 
#define PCI_CONFIG	0x28 /* PCI configuration command register */

#define PCI_DATA	0x2C



#define FARADAY_PCI_STATUS_CMD		0x04 /* Status and command */

#define FARADAY_PCI_PMC			0x40 /* Power management control */

#define FARADAY_PCI_PMCSR		0x44 /* Power management status */

#define FARADAY_PCI_CTRL1		0x48 /* Control register 1 */
@@ -45,6 +47,8 @@ 
#define FARADAY_PCI_MEM2_BASE_SIZE	0x54 /* Memory base and size #2 */

#define FARADAY_PCI_MEM3_BASE_SIZE	0x58 /* Memory base and size #3 */



#define PCI_STATUS_66MHZ_CAPABLE	BIT(21)



/* Bits 31..28 gives INTD..INTA status */

#define PCI_CTRL2_INTSTS_SHIFT		28

#define PCI_CTRL2_INTMASK_CMDERR	BIT(27)
@@ -117,6 +121,7 @@ struct faraday_pci { 
	void __iomem *base;

	struct irq_domain *irqdomain;

	struct pci_bus *bus;

	struct clk *bus_clk;

};



static int faraday_res_to_memcfg(resource_size_t mem_base,
@@ -444,6 +449,9 @@ static int faraday_pci_probe(struct platform_device *pdev) 
	struct resource *mem;

	struct resource *io;

	struct pci_host_bridge *host;

	struct clk *clk;

	unsigned char max_bus_speed = PCI_SPEED_33MHz;

	unsigned char cur_bus_speed = PCI_SPEED_33MHz;

	int ret;

	u32 val;

	LIST_HEAD(res);
@@ -462,6 +470,24 @@ static int faraday_pci_probe(struct platform_device *pdev) 
	host->sysdata = p;

	p->dev = dev;



	/* Retrieve and enable optional clocks */

	clk = devm_clk_get(dev, "PCLK");

	if (IS_ERR(clk))

		return PTR_ERR(clk);

	ret = clk_prepare_enable(clk);

	if (ret) {

		dev_err(dev, "could not prepare PCLK\n");

		return ret;

	}

	p->bus_clk = devm_clk_get(dev, "PCICLK");

	if (IS_ERR(p->bus_clk))

		return PTR_ERR(clk);

	ret = clk_prepare_enable(p->bus_clk);

	if (ret) {

		dev_err(dev, "could not prepare PCICLK\n");

		return ret;

	}



	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	p->base = devm_ioremap_resource(dev, regs);

	if (IS_ERR(p->base))
@@ -524,6 +550,34 @@ static int faraday_pci_probe(struct platform_device *pdev) 
		}

	}



	/* Check bus clock if we can gear up to 66 MHz */

	if (!IS_ERR(p->bus_clk)) {

		unsigned long rate;

		u32 val;



		faraday_raw_pci_read_config(p, 0, 0,

					    FARADAY_PCI_STATUS_CMD, 4, &val);

		rate = clk_get_rate(p->bus_clk);



		if ((rate == 33000000) && (val & PCI_STATUS_66MHZ_CAPABLE)) {

			dev_info(dev, "33MHz bus is 66MHz capable\n");

			max_bus_speed = PCI_SPEED_66MHz;

			ret = clk_set_rate(p->bus_clk, 66000000);

			if (ret)

				dev_err(dev, "failed to set bus clock\n");

		} else {

			dev_info(dev, "33MHz only bus\n");

			max_bus_speed = PCI_SPEED_33MHz;

		}



		/* Bumping the clock may fail so read back the rate */

		rate = clk_get_rate(p->bus_clk);

		if (rate == 33000000)

			cur_bus_speed = PCI_SPEED_33MHz;

		if (rate == 66000000)

			cur_bus_speed = PCI_SPEED_66MHz;

	}



	ret = faraday_pci_parse_map_dma_ranges(p, dev->of_node);

	if (ret)

		return ret;
@@ -535,6 +589,8 @@ static int faraday_pci_probe(struct platform_device *pdev) 
		return ret;

	}

	p->bus = host->bus;

	p->bus->max_bus_speed = max_bus_speed;

	p->bus->cur_bus_speed = cur_bus_speed;



	pci_bus_assign_resources(p->bus);

	pci_bus_add_devices(p->bus);