Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6e21ce9d authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6 

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6:
  pdc202xx_new: PLL detection fix
  via82cxxx: add Arima W730-K8 and other rebadgings to short cables list
  pmac: build fix
  pata_ali/alim15x3: override 80-wire cable detection for Toshiba S1800-814
  hpt366: UltraDMA filter for SATA cards (take 2)
  ide: add ide_dev_is_sata() helper (take 2)
  hpt366: fix PCI clock detection for HPT374 (take 4)
  pdc202xx_new: fix PCI refcounting
  ide: fix PCI refcounting
  mpc8xx: Only build mpc8xx on arch/ppc
parents 01a6a779 56fe23d5

drivers/ata/pata_ali.c

+7 −0
Original line number Diff line number Diff line
@@ -48,6 +48,13 @@ static struct dmi_system_id cable_dmi_table[] = { 
			DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),

		},

	},

	{

		.ident = "Toshiba Satelite S1800-814",

		.matches = {

			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),

			DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),

		},

	},

	{ }

};

drivers/ide/Kconfig

+2 −2
Original line number Diff line number Diff line
@@ -781,7 +781,7 @@ endif 


config BLK_DEV_IDE_PMAC

	bool "Builtin PowerMac IDE support"

	depends on PPC_PMAC && IDE=y

	depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y

	help

	  This driver provides support for the built-in IDE controller on

	  most of the recent Apple Power Macintoshes and PowerBooks.
@@ -946,7 +946,7 @@ config BLK_DEV_Q40IDE 


config BLK_DEV_MPC8xx_IDE

	bool "MPC8xx IDE support"

	depends on 8xx && IDE=y && BLK_DEV_IDE=y

	depends on 8xx && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE

	select IDE_GENERIC

	help

	  This option provides support for IDE on Motorola MPC8xx Systems.

drivers/ide/ide-iops.c

+1 −2
Original line number Diff line number Diff line
@@ -615,8 +615,7 @@ u8 eighty_ninty_three (ide_drive_t *drive) 
	if (hwif->cbl != ATA_CBL_PATA80 && !ivb)

		goto no_80w;



	/* Check for SATA but only if we are ATA5 or higher */

	if (id->hw_config == 0 && (id->major_rev_num & 0x7FE0))

	if (ide_dev_is_sata(id))

		return 1;



	/*

drivers/ide/pci/alim15x3.c

+7 −0
Original line number Diff line number Diff line
@@ -596,6 +596,13 @@ static struct dmi_system_id cable_dmi_table[] = { 
			DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),

		},

	},

	{

		.ident = "Toshiba Satellite S1800-814",

		.matches = {

			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),

			DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),

		},

	},

	{ }

};

drivers/ide/pci/hpt366.c

+79 −59
Original line number Diff line number Diff line 
/*

 * linux/drivers/ide/pci/hpt366.c		Version 1.10	Jun 29, 2007

 * linux/drivers/ide/pci/hpt366.c		Version 1.12	Aug 19, 2007

 *

 * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>

 * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
@@ -68,7 +68,8 @@ 
 *   HPT37x chip family; save space by introducing the separate transfer mode

 *   table in which the mode lookup is done

 * - use f_CNT value saved by  the HighPoint BIOS as reading it directly gives

 *   the wrong PCI frequency since DPLL has already been calibrated by BIOS

 *   the wrong PCI frequency since DPLL has already been calibrated by BIOS;

 *   read it only from the function 0 of HPT374 chips

 * - fix the hotswap code:  it caused RESET- to glitch when tristating the bus,

 *   and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead

 * - pass to init_chipset() handlers a copy of the IDE PCI device structure as
@@ -113,6 +114,7 @@ 
 *   unify HPT36x/37x timing setup code and the speedproc handlers by joining

 *   the register setting lists into the table indexed by the clock selected

 * - set the correct hwif->ultra_mask for each individual chip

 * - add UltraDMA mode filtering for the HPT37[24] based SATA cards

 *	Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com>

 */
@@ -517,42 +519,44 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) 
}



/*

 *	Note for the future; the SATA hpt37x we must set

 *	either PIO or UDMA modes 0,4,5

 * The Marvell bridge chips used on the HighPoint SATA cards do not seem

 * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...

 */



static u8 hpt3xx_udma_filter(ide_drive_t *drive)

{

	struct hpt_info *info	= pci_get_drvdata(HWIF(drive)->pci_dev);

	u8 mask;

	ide_hwif_t *hwif	= HWIF(drive);

	struct hpt_info *info	= pci_get_drvdata(hwif->pci_dev);

	u8 mask 		= hwif->ultra_mask;



	switch (info->chip_type) {

	case HPT370A:

		if (!HPT370_ALLOW_ATA100_5 ||

		    check_in_drive_list(drive, bad_ata100_5))

			return 0x1f;

		else

			return 0x3f;

	case HPT370:

		if (!HPT370_ALLOW_ATA100_5 ||

		    check_in_drive_list(drive, bad_ata100_5))

			mask = 0x1f;

		else

			mask = 0x3f;

		break;

	case HPT36x:

		if (!HPT366_ALLOW_ATA66_4 ||

		    check_in_drive_list(drive, bad_ata66_4))

			mask = 0x0f;

		else

			mask = 0x1f;

			mask = ATA_UDMA3;



		if (!HPT366_ALLOW_ATA66_3 ||

		    check_in_drive_list(drive, bad_ata66_3))

			mask = 0x07;

			mask = ATA_UDMA2;

		break;

	case HPT370:

		if (!HPT370_ALLOW_ATA100_5 ||

		    check_in_drive_list(drive, bad_ata100_5))

			mask = ATA_UDMA4;

		break;

	case HPT370A:

		if (!HPT370_ALLOW_ATA100_5 ||

		    check_in_drive_list(drive, bad_ata100_5))

			return ATA_UDMA4;

	case HPT372 :

	case HPT372A:

	case HPT372N:

	case HPT374 :

		if (ide_dev_is_sata(drive->id))

			mask &= ~0x0e;

		/* Fall thru */

	default:

		return 0x7f;

		return mask;

	}



	return check_in_drive_list(drive, bad_ata33) ? 0x00 : mask;
@@ -981,6 +985,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha 
	struct hpt_info *info	= kmalloc(sizeof(struct hpt_info), GFP_KERNEL);

	unsigned long io_base	= pci_resource_start(dev, 4);

	u8 pci_clk,  dpll_clk	= 0;	/* PCI and DPLL clock in MHz */

	u8 chip_type;

	enum ata_clock	clock;



	if (info == NULL) {
@@ -992,7 +997,8 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha 
	 * Copy everything from a static "template" structure

	 * to just allocated per-chip hpt_info structure.

	 */

	*info = *(struct hpt_info *)pci_get_drvdata(dev);

	memcpy(info, pci_get_drvdata(dev), sizeof(struct hpt_info));

	chip_type = info->chip_type;



	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));

	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
@@ -1002,7 +1008,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha 
	/*

	 * First, try to estimate the PCI clock frequency...

	 */

	if (info->chip_type >= HPT370) {

	if (chip_type >= HPT370) {

		u8  scr1  = 0;

		u16 f_cnt = 0;

		u32 temp  = 0;
@@ -1016,7 +1022,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha 
		 * HighPoint does this for HPT372A.

		 * NOTE: This register is only writeable via I/O space.

		 */

		if (info->chip_type == HPT372A)

		if (chip_type == HPT372A)

			outb(0x0e, io_base + 0x9c);



		/*
@@ -1034,13 +1040,28 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha 
		 * First try reading the register in which the HighPoint BIOS

		 * saves f_CNT value before  reprogramming the DPLL from its

		 * default setting (which differs for the various chips).

		 * NOTE: This register is only accessible via I/O space.

		 *

		 * In case the signature check fails, we'll have to resort to

		 * reading the f_CNT register itself in hopes that nobody has

		 * touched the DPLL yet...

		 * NOTE: This register is only accessible via I/O space;

		 * HPT374 BIOS only saves it for the function 0, so we have to

		 * always read it from there -- no need to check the result of

		 * pci_get_slot() for the function 0 as the whole device has

		 * been already "pinned" (via function 1) in init_setup_hpt374()

		 */

		if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {

			struct pci_dev	*dev1 = pci_get_slot(dev->bus,

							     dev->devfn - 1);

			unsigned long io_base = pci_resource_start(dev1, 4);



			temp =	inl(io_base + 0x90);

			pci_dev_put(dev1);

		} else

			temp =	inl(io_base + 0x90);



		/*

		 * In case the signature check fails, we'll have to

		 * resort to reading the f_CNT register itself in hopes

		 * that nobody has touched the DPLL yet...

		 */

		if ((temp & 0xFFFFF000) != 0xABCDE000) {

			int i;
@@ -1120,7 +1141,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha 
	 * We also  don't like using  the DPLL because this causes glitches

	 * on PRST-/SRST- when the state engine gets reset...

	 */

	if (info->chip_type >= HPT374 || info->settings[clock] == NULL) {

	if (chip_type >= HPT374 || info->settings[clock] == NULL) {

		u16 f_low, delta = pci_clk < 50 ? 2 : 4;

		int adjust;
@@ -1190,7 +1211,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha 
	/* Point to this chip's own instance of the hpt_info structure. */

	pci_set_drvdata(dev, info);



	if (info->chip_type >= HPT370) {

	if (chip_type >= HPT370) {

		u8  mcr1, mcr4;



		/*
@@ -1209,7 +1230,7 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha 
	 * the MISC. register to stretch the UltraDMA Tss timing.

	 * NOTE: This register is only writeable via I/O space.

	 */

	if (info->chip_type == HPT371N && clock == ATA_CLOCK_66MHZ)

	if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ)



		outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c);
@@ -1235,7 +1256,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) 
	hwif->maskproc		= &hpt3xx_maskproc;

	hwif->busproc		= &hpt3xx_busproc;



	if (chip_type <= HPT370A)

	hwif->udma_filter	= &hpt3xx_udma_filter;



	/*
@@ -1486,19 +1506,19 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d) 
		d->host_flags |= IDE_HFLAG_SINGLE;

		d->enablebits[0].mask = d->enablebits[0].val = 0x10;



		d->udma_mask = HPT366_ALLOW_ATA66_3 ?

			      (HPT366_ALLOW_ATA66_4 ? 0x1f : 0x0f) : 0x07;

		d->udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ?

			       ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2;

		break;

	case 3:

	case 4:

		d->udma_mask = HPT370_ALLOW_ATA100_5 ? 0x3f : 0x1f;

		d->udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4;

		break;

	default:

		rev = 6;

		/* fall thru */

	case 5:

	case 6:

		d->udma_mask = HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f;

		d->udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5;

		break;

	}
@@ -1559,7 +1579,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { 
		.init_dma	= init_dma_hpt366,

		.autodma	= AUTODMA,

		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},

		.udma_mask	= HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f,

		.udma_mask	= HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,

		.bootable	= OFF_BOARD,

		.extra		= 240,

		.pio_mask	= ATA_PIO4,
@@ -1571,7 +1591,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { 
		.init_dma	= init_dma_hpt366,

		.autodma	= AUTODMA,

		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},

		.udma_mask	= HPT302_ALLOW_ATA133_6 ? 0x7f : 0x3f,

		.udma_mask	= HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,

		.bootable	= OFF_BOARD,

		.extra		= 240,

		.pio_mask	= ATA_PIO4,
@@ -1583,7 +1603,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { 
		.init_dma	= init_dma_hpt366,

		.autodma	= AUTODMA,

		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},

		.udma_mask	= HPT371_ALLOW_ATA133_6 ? 0x7f : 0x3f,

		.udma_mask	= HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,

		.bootable	= OFF_BOARD,

		.extra		= 240,

		.pio_mask	= ATA_PIO4,
@@ -1595,7 +1615,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { 
		.init_dma	= init_dma_hpt366,

		.autodma	= AUTODMA,

		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},

		.udma_mask	= 0x3f,

		.udma_mask	= ATA_UDMA5,

		.bootable	= OFF_BOARD,

		.extra		= 240,

		.pio_mask	= ATA_PIO4,
@@ -1607,7 +1627,7 @@ static ide_pci_device_t hpt366_chipsets[] __devinitdata = { 
		.init_dma	= init_dma_hpt366,

		.autodma	= AUTODMA,

		.enablebits	= {{0x50,0x04,0x04}, {0x54,0x04,0x04}},

		.udma_mask	= HPT372_ALLOW_ATA133_6 ? 0x7f : 0x3f,

		.udma_mask	= HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,

		.bootable	= OFF_BOARD,

		.extra		= 240,

		.pio_mask	= ATA_PIO4,