Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Unverified Commit 6ca11185 authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Mark Brown
Browse files

ASoC: remove blackfin drivers 



The blackfin architecture is getting removed, so the ASoC drivers
are all obsolete as well.

Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 03a0dded

MAINTAINERS

+0 −7
Original line number Diff line number Diff line
@@ -841,13 +841,6 @@ F: sound/soc/codecs/ad7* 
F:	sound/soc/codecs/ssm*

F:	sound/soc/codecs/sigmadsp.*



ANALOG DEVICES INC ASOC DRIVERS

L:	adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)

L:	alsa-devel@alsa-project.org (moderated for non-subscribers)

W:	http://blackfin.uclinux.org/

S:	Supported

F:	sound/soc/blackfin/*



ANALOG DEVICES INC DMA DRIVERS

M:	Lars-Peter Clausen <lars@metafoo.de>

W:	http://ez.analog.com/community/linux-device-drivers

sound/soc/Kconfig

+0 −1
Original line number Diff line number Diff line
@@ -45,7 +45,6 @@ source "sound/soc/amd/Kconfig" 
source "sound/soc/atmel/Kconfig"

source "sound/soc/au1x/Kconfig"

source "sound/soc/bcm/Kconfig"

source "sound/soc/blackfin/Kconfig"

source "sound/soc/cirrus/Kconfig"

source "sound/soc/davinci/Kconfig"

source "sound/soc/dwc/Kconfig"

sound/soc/Makefile

+0 −1
Original line number Diff line number Diff line
@@ -29,7 +29,6 @@ obj-$(CONFIG_SND_SOC) += amd/ 
obj-$(CONFIG_SND_SOC)	+= atmel/

obj-$(CONFIG_SND_SOC)	+= au1x/

obj-$(CONFIG_SND_SOC)	+= bcm/

obj-$(CONFIG_SND_SOC)	+= blackfin/

obj-$(CONFIG_SND_SOC)	+= cirrus/

obj-$(CONFIG_SND_SOC)	+= davinci/

obj-$(CONFIG_SND_SOC)	+= dwc/

sound/soc/blackfin/Kconfig

deleted100644 → 0
+0 −205
Original line number Diff line number Diff line 
config SND_BF5XX_I2S

	tristate "SoC I2S Audio for the ADI Blackfin chip"

	depends on BLACKFIN

	select SND_BF5XX_SOC_SPORT if !BF60x

	select SND_BF6XX_SOC_SPORT if BF60x

	help

	  Say Y or M if you want to add support for codecs attached to

	  the Blackfin SPORT (synchronous serial ports) interface in I2S

	  mode (supports single stereo In/Out).

	  You will also need to select the audio interfaces to support below.



config SND_BF5XX_SOC_SSM2602

	tristate "SoC SSM2602 Audio Codec Add-On Card support"

	depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI

	select SND_BF5XX_SOC_I2S if !BF60x

	select SND_BF6XX_SOC_I2S if BF60x

	select SND_SOC_SSM2602_SPI if SPI_MASTER

	select SND_SOC_SSM2602_I2C if I2C

	help

	  Say Y if you want to add support for the Analog Devices

	  SSM2602 Audio Codec Add-On Card.



config SND_SOC_BFIN_EVAL_ADAU1701

	tristate "Support for the EVAL-ADAU1701MINIZ board on Blackfin eval boards"

	depends on SND_BF5XX_I2S && I2C

	select SND_BF5XX_SOC_I2S

	select SND_SOC_ADAU1701

	help

	  Say Y if you want to add support for the Analog Devices EVAL-ADAU1701MINIZ

	  board connected to one of the Blackfin evaluation boards like the

	  BF5XX-STAMP or BF5XX-EZKIT.



config SND_SOC_BFIN_EVAL_ADAU1373

	tristate "Support for the EVAL-ADAU1373 board on Blackfin eval boards"

	depends on SND_BF5XX_I2S && I2C

	select SND_BF5XX_SOC_I2S

	select SND_SOC_ADAU1373

	help

	  Say Y if you want to add support for the Analog Devices EVAL-ADAU1373

	  board connected to one of the Blackfin evaluation boards like the

	  BF5XX-STAMP or BF5XX-EZKIT.



	  Note: This driver assumes that first ADAU1373 DAI is connected to the

	  first SPORT port on the BF5XX board.



config SND_SOC_BFIN_EVAL_ADAU1X61

	tristate "Support for the EVAL-ADAU1X61 board on Blackfin eval boards"

	depends on SND_BF5XX_I2S && I2C

	select SND_BF5XX_SOC_I2S

	select SND_SOC_ADAU1761_I2C

	help

	  Say Y if you want to add support for the Analog Devices EVAL-ADAU1X61

	  board connected to one of the Blackfin evaluation boards like the

	  BF5XX-STAMP or BF5XX-EZKIT.



	  Note: This driver assumes that the ADAU1X61 is connected to the

	  first SPORT port on the BF5XX board.



config SND_SOC_BFIN_EVAL_ADAU1X81

	tristate "Support for the EVAL-ADAU1X81 boards on Blackfin eval boards"

	depends on SND_BF5XX_I2S && I2C

	select SND_BF5XX_SOC_I2S

	select SND_SOC_ADAU1781_I2C

	help

	  Say Y if you want to add support for the Analog Devices EVAL-ADAU1X81

	  board connected to one of the Blackfin evaluation boards like the

	  BF5XX-STAMP or BF5XX-EZKIT.



	  Note: This driver assumes that the ADAU1X81 is connected to the

	  first SPORT port on the BF5XX board.



config SND_SOC_BFIN_EVAL_ADAV80X

	tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards"

	depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI

	select SND_BF5XX_SOC_I2S

	select SND_SOC_ADAV801 if SPI_MASTER

	select SND_SOC_ADAV803 if I2C

	help

	  Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or

	  EVAL-ADAV803 board connected to one of the Blackfin evaluation boards

	  like the BF5XX-STAMP or BF5XX-EZKIT.



	  Note: This driver assumes that the ADAV80X digital record and playback

	  interfaces are connected to the first SPORT port on the BF5XX board.



config SND_BF5XX_SOC_AD1836

	tristate "SoC AD1836 Audio support for BF5xx"

	depends on SND_BF5XX_I2S && SPI_MASTER

	select SND_BF5XX_SOC_I2S

	select SND_SOC_AD1836

	help

	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.



config SND_BF5XX_SOC_AD193X

	tristate "SoC AD193X Audio support for Blackfin"

	depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI

	select SND_BF5XX_SOC_I2S

	select SND_SOC_AD193X_I2C if I2C

	select SND_SOC_AD193X_SPI if SPI_MASTER

	help

	  Say Y if you want to add support for AD193X codec on Blackfin.

	  This driver supports AD1936, AD1937, AD1938 and AD1939.



config SND_BF5XX_SOC_AD73311

	tristate "SoC AD73311 Audio support for Blackfin"

	depends on SND_BF5XX_I2S

	select SND_BF5XX_SOC_I2S

	select SND_SOC_AD73311

	help

	  Say Y if you want to add support for AD73311 codec on Blackfin.



config SND_BFIN_AD73311_SE

	int "PF pin for AD73311L Chip Select"

	depends on SND_BF5XX_SOC_AD73311

	default 4

	help

	  Enter the GPIO used to control AD73311's SE pin. Acceptable

	  values are 0 to 7



config SND_BF5XX_AC97

	tristate "SoC AC97 Audio for the ADI BF5xx chip"

	depends on BLACKFIN

	select AC97_BUS

	select SND_SOC_AC97_BUS

	select SND_BF5XX_SOC_SPORT

	select SND_BF5XX_SOC_AC97

	help

	  Say Y or M if you want to add support for codecs attached to

	  the Blackfin SPORT (synchronous serial ports) interface in slot 16

	  mode (pseudo AC97 interface).

	  You will also need to select the audio interfaces to support below.



	  Note:

	  AC97 codecs which do not implement the slot-16 mode will not function

	  properly with this driver. This driver is known to work with the

	  Analog Devices line of AC97 codecs.



config SND_BF5XX_MMAP_SUPPORT

	bool "Enable MMAP Support"

	depends on SND_BF5XX_AC97

	default y

	help

	  Say y if you want AC97 driver to support mmap mode.

	  We introduce an intermediate buffer to simulate mmap.



config SND_BF5XX_MULTICHAN_SUPPORT

	bool "Enable Multichannel Support"

	depends on SND_BF5XX_AC97

	default n

	help

	  Say y if you want AC97 driver to support up to 5.1 channel audio.

	  this mode will consume much more memory for DMA.



config SND_BF5XX_HAVE_COLD_RESET

	bool "BOARD has COLD Reset GPIO"

	depends on SND_BF5XX_AC97

	default y if BFIN548_EZKIT

	default n if !BFIN548_EZKIT



config SND_BF5XX_RESET_GPIO_NUM

	int "Set a GPIO for cold reset"

	depends on SND_BF5XX_HAVE_COLD_RESET

	range 0 159

	default 19 if BFIN548_EZKIT

	default 5 if BFIN537_STAMP

	default 0

	help

	  Set the correct GPIO for RESET the sound chip.



config SND_BF5XX_SOC_AD1980

	tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)"

	depends on SND_BF5XX_AC97

	select SND_BF5XX_SOC_AC97

	select SND_SOC_AD1980

	help

	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.



	  Warning:

	  Because Analog Devices Inc. discontinued the ad1980 sound chip since

	  Sep. 2009, this ad1980 driver is not maintained, tested and supported

	  by ADI now.



config SND_BF5XX_SOC_SPORT

	tristate



config SND_BF6XX_SOC_SPORT

	tristate



config SND_BF5XX_SOC_I2S

	tristate



config SND_BF6XX_SOC_I2S

	tristate



config SND_BF5XX_SOC_AC97

	tristate



config SND_BF5XX_SPORT_NUM

	int "Set a SPORT for Sound chip"

	depends on (SND_BF5XX_SOC_SPORT || SND_BF6XX_SOC_SPORT)

	range 0 3 if BF54x

	range 0 1 if !BF54x

	default 0

	help

	  Set the correct SPORT for sound chip.

sound/soc/blackfin/Makefile

deleted100644 → 0
+0 −40
Original line number Diff line number Diff line 
# SPDX-License-Identifier: GPL-2.0

# Blackfin Platform Support

snd-bf5xx-ac97-objs := bf5xx-ac97-pcm.o

snd-bf5xx-i2s-objs := bf5xx-i2s-pcm.o

snd-soc-bf5xx-sport-objs := bf5xx-sport.o

snd-soc-bf6xx-sport-objs := bf6xx-sport.o

snd-soc-bf5xx-ac97-objs := bf5xx-ac97.o

snd-soc-bf5xx-i2s-objs := bf5xx-i2s.o

snd-soc-bf6xx-i2s-objs := bf6xx-i2s.o



obj-$(CONFIG_SND_BF5XX_AC97) += snd-bf5xx-ac97.o

obj-$(CONFIG_SND_BF5XX_I2S) += snd-bf5xx-i2s.o

obj-$(CONFIG_SND_BF5XX_SOC_SPORT) += snd-soc-bf5xx-sport.o

obj-$(CONFIG_SND_BF6XX_SOC_SPORT) += snd-soc-bf6xx-sport.o

obj-$(CONFIG_SND_BF5XX_SOC_AC97) += snd-soc-bf5xx-ac97.o

obj-$(CONFIG_SND_BF5XX_SOC_I2S) += snd-soc-bf5xx-i2s.o

obj-$(CONFIG_SND_BF6XX_SOC_I2S) += snd-soc-bf6xx-i2s.o



# Blackfin Machine Support

snd-ad1836-objs := bf5xx-ad1836.o

snd-ad1980-objs := bf5xx-ad1980.o

snd-ssm2602-objs := bf5xx-ssm2602.o

snd-ad73311-objs := bf5xx-ad73311.o

snd-ad193x-objs := bf5xx-ad193x.o

snd-soc-bfin-eval-adau1373-objs := bfin-eval-adau1373.o

snd-soc-bfin-eval-adau1x61-objs := bfin-eval-adau1x61.o

snd-soc-bfin-eval-adau1x81-objs := bfin-eval-adau1x81.o

snd-soc-bfin-eval-adau1701-objs := bfin-eval-adau1701.o

snd-soc-bfin-eval-adav80x-objs := bfin-eval-adav80x.o



obj-$(CONFIG_SND_BF5XX_SOC_AD1836) += snd-ad1836.o

obj-$(CONFIG_SND_BF5XX_SOC_AD1980) += snd-ad1980.o

obj-$(CONFIG_SND_BF5XX_SOC_SSM2602) += snd-ssm2602.o

obj-$(CONFIG_SND_BF5XX_SOC_AD73311) += snd-ad73311.o

obj-$(CONFIG_SND_BF5XX_SOC_AD193X) += snd-ad193x.o

obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) += snd-soc-bfin-eval-adau1373.o

obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) += snd-soc-bfin-eval-adau1x61.o

obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X81) += snd-soc-bfin-eval-adau1x81.o

obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) += snd-soc-bfin-eval-adau1701.o

obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) += snd-soc-bfin-eval-adav80x.o