Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 69ddea35 authored by Hans de Goede's avatar Hans de Goede Committed by Maxime Ripard
Browse files

ARM: dts: sun7i: Add dts file for the Orangepi SBC 

The Orangepi is a development board using the Allwinner A20 SoC, with 1G RAM,
microsd slot, HDMI, 1Gbit ethernet, USB wifi, Micro USB (otg), sata, 4 USB A
ports, ir receiver and a headphones jack.

Also see:
http://linux-sunxi.org/Xunlong_Orange_Pi
http://www.orangepi.org/



Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
[maxime: Added /chosen/stdout-path]
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent ccb4ada2

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -562,6 +562,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ 
	sun7i-a20-olinuxino-lime.dtb \

	sun7i-a20-olinuxino-lime2.dtb \

	sun7i-a20-olinuxino-micro.dtb \

	sun7i-a20-orangepi.dtb \

	sun7i-a20-pcduino3.dtb \

	sun7i-a20-pcduino3-nano.dtb \

	sun7i-a20-wexler-tab7200.dtb

arch/arm/boot/dts/sun7i-a20-orangepi.dts

0 → 100644
+233 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>

 *

 * Hans de Goede <hdegoede@redhat.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 *     You should have received a copy of the GNU General Public

 *     License along with this file; if not, write to the Free

 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,

 *     MA 02110-1301 USA

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "sun7i-a20.dtsi"

#include "sunxi-common-regulators.dtsi"



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/pinctrl/sun4i-a10.h>



/ {

	model = "Orange Pi";

	compatible = "xunlong,orangepi", "allwinner,sun7i-a20";



	aliases {

		serial0 = &uart0;

	};



	chosen {

		stdout-path = "serial0:115200n8";

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_pins_orangepi>;



		green {

			label = "orangepi:green:usr";

			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */

		};

	};



	reg_gmac_3v3: gmac-3v3 {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

		pinctrl-0 = <&gmac_power_pin_orangepi>;

		regulator-name = "gmac-3v3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		startup-delay-us = <100000>;

		enable-active-high;

		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */

	};

};



&ahci {

	status = "okay";

};



&ehci0 {

	status = "okay";

};



&ehci1 {

	status = "okay";

};



&gmac {

	pinctrl-names = "default";

	pinctrl-0 = <&gmac_pins_rgmii_a>;

	phy = <&phy1>;

	phy-mode = "rgmii";

	phy-supply = <&reg_gmac_3v3>;

	status = "okay";



	phy1: ethernet-phy@1 {

		reg = <1>;

	};

};



&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins_a>;

	status = "okay";



	axp209: pmic@34 {

		reg = <0x34>;

		interrupt-parent = <&nmi_intc>;

		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

	};

};



#include "axp209.dtsi"



&ir0 {

	pinctrl-names = "default";

	pinctrl-0 = <&ir0_pins_a>;

	status = "okay";

};



&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */

	cd-inverted;

	status = "okay";

};



&pio {

	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {

		allwinner,pins = "PH10";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};



	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {

		allwinner,pins = "PH22";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};



	gmac_power_pin_orangepi: gmac_power_pin@0 {

		allwinner,pins = "PH23";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};



	led_pins_orangepi: led_pins@0 {

		allwinner,pins = "PH24";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};



	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {

		allwinner,pins = "PH26";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

};



&reg_dcdc2 {

	regulator-always-on;

	regulator-min-microvolt = <1000000>;

	regulator-max-microvolt = <1500000>;

	regulator-name = "vdd-cpu";

};



&reg_dcdc3 {

	regulator-always-on;

	regulator-min-microvolt = <1000000>;

	regulator-max-microvolt = <1400000>;

	regulator-name = "vdd-int-pll";

};



&reg_ldo1 {

	regulator-name = "vdd-rtc";

};



&reg_ldo2 {

	regulator-always-on;

	regulator-min-microvolt = <3000000>;

	regulator-max-microvolt = <3000000>;

	regulator-name = "avcc";

};



&reg_usb1_vbus {

	pinctrl-0 = <&usb1_vbus_pin_bananapro>;

	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */

	status = "okay";

};



&reg_usb2_vbus {

	pinctrl-0 = <&usb2_vbus_pin_bananapro>;

	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */

	status = "okay";

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};



&usbphy {

	usb1_vbus-supply = <&reg_usb1_vbus>;

	usb2_vbus-supply = <&reg_usb2_vbus>;

	status = "okay";

};