Commit 695dcb2b authored Feb 19, 2017 by Martin Blumenstingl Committed by Kevin Hilman Mar 06, 2017

ARM64: dts: meson-gxbb-wetek-play2: add the ethernet PHY's reset GPIO



This resets the ethernet PHY during boot to get the PHY into a "clean"
state.
While here also specify the phy-handle of the ethmac node to make the
PHY configuration similar to the one we have on GXL devices. This will
allow us to specify OF-properties for the PHY itself.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

parent be5f7bef

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts

+24 −0

Original line number	Diff line number	Diff line
		@@ -87,6 +87,30 @@
		};
		};

		&ethmac {
		status = "okay";
		pinctrl-0 = <&eth_rgmii_pins>;
		pinctrl-names = "default";

		phy-handle = <&eth_phy0>;
		phy-mode = "rgmii";

		snps,reset-gpio = <&gpio GPIOZ_14 0>;
		snps,reset-delays-us = <0 10000 1000000>;
		snps,reset-active-low;

		mdio {
		compatible = "snps,dwmac-mdio";
		#address-cells = <1>;
		#size-cells = <0>;

		eth_phy0: ethernet-phy@0 {
		/* Realtek RTL8211F (0x001cc916) */
		reg = <0>;
		};
		};
		};

		&i2c_A {
		status = "okay";
		pinctrl-0 = <&i2c_a_pins>;