Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 64afc31f authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz
Browse files

ide/Kconfig: couple of fixes 



* Don't ask to enable no longer existing config options
  ("Use DMA by default when available" and "Special UDMA Feature").

* PIIX host driver doesn't support Victory66 chipset.

* "ide0=cmd640_vlb" -> "cmd640.probe_vlb"

* "ide=doubler" -> "gayle.doubler"

* Amiga IDE doubler support is a feature for gayle host driver
  not a separate host driver.

* Remove Andre's mail.

Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent e7f379d5

drivers/ide/Kconfig

+11 −28
Original line number Diff line number Diff line 
#

# IDE ATA ATAPI Block device driver configuration

#

# Andre Hedrick <andre@linux-ide.org>

#



# Select HAVE_IDE if IDE is supported

config HAVE_IDE
@@ -335,7 +333,7 @@ config BLK_DEV_CMD640 
	  This driver will work automatically in PCI based systems (most new

	  systems have PCI slots). But if your system uses VESA local bus

	  (VLB) instead of PCI, you must also supply a kernel boot parameter

	  to enable the CMD640 bugfix/support: "ide0=cmd640_vlb". (Try "man

	  to enable the CMD640 bugfix/support: "cmd640.probe_vlb". (Try "man

	  bootparam" or see the documentation of your boot loader about how to

	  pass options to the kernel.)
@@ -457,8 +455,7 @@ config BLK_DEV_ALI15X3 
	  onboard chipsets.  It also tests for Simplex mode and enables

	  normal dual channel support.



	  If you say Y here, you also need to say Y to "Use DMA by default

	  when available", above.  Please read the comments at the top of

	  Please read the comments at the top of

	  <file:drivers/ide/pci/alim15x3.c>.



	  If unsure, say N.
@@ -505,9 +502,6 @@ config BLK_DEV_CY82C693 
	  This driver adds detection and support for the CY82C693 chipset

	  used on Digital's PC-Alpha 164SX boards.



	  If you say Y here, you need to say Y to "Use DMA by default

	  when available" as well.



config BLK_DEV_CS5520

	tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"

	depends on EXPERIMENTAL
@@ -598,13 +592,12 @@ config BLK_DEV_SC1200 
	  National SCx200 series of embedded x86 "Geode" systems.



config BLK_DEV_PIIX

	tristate "Intel PIIXn chipsets support"

	tristate "Intel PIIX/ICH chipsets support"

	select BLK_DEV_IDEDMA_PCI

	help

	  This driver adds explicit support for Intel PIIX and ICH chips

	  and also for the Efar Victory66 (slc90e66) chip.  This allows

	  the kernel to change PIO, DMA and UDMA speeds and to configure

	  the chip to optimum performance.

	  This driver adds explicit support for Intel PIIX and ICH chips.

	  This allows the kernel to change PIO, DMA and UDMA speeds and to

	  configure the chip to optimum performance.



config BLK_DEV_IT8213

	tristate "IT8213 IDE support"
@@ -642,11 +635,7 @@ config BLK_DEV_PDC202XX_OLD 
	  happen if the BIOS revisions of all installed cards (three-max) do

	  not match, the driver attempts to do dynamic tuning of the chipset

	  at boot-time for max-speed.  Ultra33 BIOS 1.25 or newer is required

	  for more than one card. This card may require that you say Y to

	  "Special UDMA Feature".



	  If you say Y here, you need to say Y to "Use DMA by default when

	  available" as well.

	  for more than one card.



	  Please read the comments at the top of

	  <file:drivers/ide/pci/pdc202xx_old.c>.
@@ -695,9 +684,6 @@ config BLK_DEV_SIS5513 
	  ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,

	  SiS745, SiS750



	  If you say Y here, you need to say Y to "Use DMA by default when

	  available" as well.



	  Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>.



config BLK_DEV_SL82C105
@@ -719,9 +705,6 @@ config BLK_DEV_SLC90E66 
	  and it will handle timing cycles.  Since this is an improved

	  look-a-like to the PIIX4 it should be a nice addition.



	  If you say Y here, you need to say Y to "Use DMA by default when

	  available" as well.



	  Please read the comments at the top of

	  <file:drivers/ide/pci/slc90e66.c>.
@@ -873,17 +856,17 @@ config BLK_DEV_IDEDOUBLER 
	bool "Amiga IDE Doubler support (EXPERIMENTAL)"

	depends on BLK_DEV_GAYLE && EXPERIMENTAL

	---help---

	  This driver provides support for the so-called `IDE doublers' (made

	  This feature provides support for the so-called `IDE doublers' (made

	  by various manufacturers, e.g. Eyetech) that can be connected to

	  the on-board IDE interface of some Amiga models. Using such an IDE

	  doubler, you can connect up to four instead of two IDE devices to

	  the Amiga's on-board IDE interface.



	  Note that the normal Amiga Gayle IDE driver may not work correctly

	  if you have an IDE doubler and don't enable this driver!

	  if you have an IDE doubler and don't enable this feature!



	  Say Y if you have an IDE doubler.  The driver is enabled at kernel

	  runtime using the "ide=doubler" kernel boot parameter.

	  Say Y if you have an IDE doubler.  The feature is enabled at kernel

	  runtime using the "gayle.doubler" kernel boot parameter.



config BLK_DEV_BUDDHA

	tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"