Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 646cdb32 authored by Alexander Beregalov's avatar Alexander Beregalov Committed by David S. Miller
Browse files

3c50x: convert printk() to pr_<foo>() 



Signed-off-by: default avatarAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d3f65f7c

drivers/net/3c501.c

+29 −36
Original line number Diff line number Diff line
@@ -281,7 +281,7 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr) 
		autoirq = probe_irq_off(irq_mask);



		if (autoirq == 0) {

			printk(KERN_WARNING "%s probe at %#x failed to detect IRQ line.\n",

			pr_warning("%s probe at %#x failed to detect IRQ line.\n",

				mname, ioaddr);

			release_region(ioaddr, EL1_IO_EXTENT);

			return -EAGAIN;
@@ -297,16 +297,16 @@ static int __init el1_probe1(struct net_device *dev, int ioaddr) 
	if (autoirq)

		dev->irq = autoirq;



	printk(KERN_INFO "%s: %s EtherLink at %#lx, using %sIRQ %d.\n",

	pr_info("%s: %s EtherLink at %#lx, using %sIRQ %d.\n",

			dev->name, mname, dev->base_addr,

			autoirq ? "auto":"assigned ", dev->irq);



#ifdef CONFIG_IP_MULTICAST

	printk(KERN_WARNING "WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n");

	pr_warning("WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n");

#endif



	if (el_debug)

		printk(KERN_DEBUG "%s", version);

		pr_debug("%s", version);



	lp = netdev_priv(dev);

	memset(lp, 0, sizeof(struct net_local));
@@ -343,7 +343,7 @@ static int el_open(struct net_device *dev) 
	unsigned long flags;



	if (el_debug > 2)

		printk(KERN_DEBUG "%s: Doing el_open()...", dev->name);

		pr_debug("%s: Doing el_open()...\n", dev->name);



	retval = request_irq(dev->irq, &el_interrupt, 0, dev->name, dev);

	if (retval)
@@ -374,7 +374,7 @@ static void el_timeout(struct net_device *dev) 
	int ioaddr = dev->base_addr;



	if (el_debug)

		printk(KERN_DEBUG "%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",

		pr_debug("%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",

			dev->name, inb(TX_STATUS),

			inb(AX_STATUS), inb(RX_STATUS));

	dev->stats.tx_errors++;
@@ -483,14 +483,13 @@ static int el_start_xmit(struct sk_buff *skb, struct net_device *dev) 
			lp->loading = 0;

			dev->trans_start = jiffies;

			if (el_debug > 2)

				printk(KERN_DEBUG " queued xmit.\n");

				pr_debug(" queued xmit.\n");

			dev_kfree_skb(skb);

			return 0;

		}

		/* A receive upset our load, despite our best efforts */

		if (el_debug > 2)

			printk(KERN_DEBUG "%s: burped during tx load.\n",

				dev->name);

			pr_debug("%s: burped during tx load.\n", dev->name);

		spin_lock_irqsave(&lp->lock, flags);

	} while (1);

}
@@ -540,11 +539,10 @@ static irqreturn_t el_interrupt(int irq, void *dev_id) 
	 */



	if (el_debug > 3)

		printk(KERN_DEBUG "%s: el_interrupt() aux=%#02x",

							dev->name, axsr);

		pr_debug("%s: el_interrupt() aux=%#02x\n", dev->name, axsr);



	if (lp->loading == 1 && !lp->txing)

		printk(KERN_WARNING "%s: Inconsistent state loading while not in tx\n",

		pr_warning("%s: Inconsistent state loading while not in tx\n",

			dev->name);



	if (lp->txing) {
@@ -555,19 +553,17 @@ static irqreturn_t el_interrupt(int irq, void *dev_id) 
		int txsr = inb(TX_STATUS);



		if (lp->loading == 1) {

			if (el_debug > 2) {

				printk(KERN_DEBUG "%s: Interrupt while loading [",

					dev->name);

				printk(" txsr=%02x gp=%04x rp=%04x]\n",

					txsr, inw(GP_LOW), inw(RX_LOW));

			}

			if (el_debug > 2)

				pr_debug("%s: Interrupt while loading [txsr=%02x gp=%04x rp=%04x]\n",

					dev->name, txsr, inw(GP_LOW), inw(RX_LOW));



			/* Force a reload */

			lp->loading = 2;

			spin_unlock(&lp->lock);

			goto out;

		}

		if (el_debug > 6)

			printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x",

			pr_debug("%s: txsr=%02x gp=%04x rp=%04x\n", dev->name,

					txsr, inw(GP_LOW), inw(RX_LOW));



		if ((axsr & 0x80) && (txsr & TX_READY) == 0) {
@@ -576,7 +572,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id) 
			 *	on trying or reset immediately ?

			 */

			if (el_debug > 1)

				printk(KERN_DEBUG "%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n",

				pr_debug("%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n",

					dev->name, txsr, axsr,

					inw(ioaddr + EL1_DATAPTR),

					inw(ioaddr + EL1_RXPTR));
@@ -587,7 +583,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id) 
			 *	Timed out

			 */

			if (el_debug)

				printk(KERN_DEBUG "%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name);

				pr_debug("%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name);

			outb(AX_SYS, AX_CMD);

			lp->txing = 0;

			dev->stats.tx_aborted_errors++;
@@ -598,7 +594,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id) 
			 */



			if (el_debug > 6)

				printk(KERN_DEBUG " retransmitting after a collision.\n");

				pr_debug("%s: retransmitting after a collision.\n", dev->name);

			/*

			 *	Poor little chip can't reset its own start

			 *	pointer
@@ -616,9 +612,8 @@ static irqreturn_t el_interrupt(int irq, void *dev_id) 
			 */

			dev->stats.tx_packets++;

			if (el_debug > 6)

				printk(KERN_DEBUG " Tx succeeded %s\n",

					(txsr & TX_RDY) ? "." :

							"but tx is busy!");

				pr_debug("%s: Tx succeeded %s\n", dev->name,

					(txsr & TX_RDY) ? "." : "but tx is busy!");

			/*

			 *	This is safe the interrupt is atomic WRT itself.

			 */
@@ -633,7 +628,8 @@ static irqreturn_t el_interrupt(int irq, void *dev_id) 


		int rxsr = inb(RX_STATUS);

		if (el_debug > 5)

			printk(KERN_DEBUG " rxsr=%02x txsr=%02x rp=%04x", rxsr, inb(TX_STATUS), inw(RX_LOW));

			pr_debug("%s: rxsr=%02x txsr=%02x rp=%04x\n",

				dev->name, rxsr, inb(TX_STATUS), inw(RX_LOW));

		/*

		 *	Just reading rx_status fixes most errors.

		 */
@@ -643,7 +639,7 @@ static irqreturn_t el_interrupt(int irq, void *dev_id) 
			/* Handled to avoid board lock-up. */

			dev->stats.rx_length_errors++;

			if (el_debug > 5)

				printk(KERN_DEBUG " runt.\n");

				pr_debug("%s: runt.\n", dev->name);

		} else if (rxsr & RX_GOOD) {

			/*

			 *	Receive worked.
@@ -654,12 +650,10 @@ static irqreturn_t el_interrupt(int irq, void *dev_id) 
			 *	Nothing?  Something is broken!

			 */

			if (el_debug > 2)

				printk(KERN_DEBUG "%s: No packet seen, rxsr=%02x **resetting 3c501***\n",

				pr_debug("%s: No packet seen, rxsr=%02x **resetting 3c501***\n",

					dev->name, rxsr);

			el_reset(dev);

		}

		if (el_debug > 3)

			printk(KERN_DEBUG ".\n");

	}



	/*
@@ -695,11 +689,11 @@ static void el_receive(struct net_device *dev) 
	pkt_len = inw(RX_LOW);



	if (el_debug > 4)

		printk(KERN_DEBUG " el_receive %d.\n", pkt_len);

		pr_debug(" el_receive %d.\n", pkt_len);



	if (pkt_len < 60 || pkt_len > 1536) {

		if (el_debug)

			printk(KERN_DEBUG "%s: bogus packet, length=%d\n",

			pr_debug("%s: bogus packet, length=%d\n",

						dev->name, pkt_len);

		dev->stats.rx_over_errors++;

		return;
@@ -718,8 +712,7 @@ static void el_receive(struct net_device *dev) 


	outw(0x00, GP_LOW);

	if (skb == NULL) {

		printk(KERN_INFO "%s: Memory squeeze, dropping packet.\n",

								dev->name);

		pr_info("%s: Memory squeeze, dropping packet.\n", dev->name);

		dev->stats.rx_dropped++;

		return;

	} else {
@@ -753,7 +746,7 @@ static void el_reset(struct net_device *dev) 
	int ioaddr = dev->base_addr;



	if (el_debug > 2)

		printk(KERN_INFO "3c501 reset...");

		pr_info("3c501 reset...\n");

	outb(AX_RESET, AX_CMD);		/* Reset the chip */

	/* Aux control, irq and loopback enabled */

	outb(AX_LOOP, AX_CMD);
@@ -787,7 +780,7 @@ static int el1_close(struct net_device *dev) 
	int ioaddr = dev->base_addr;



	if (el_debug > 2)

		printk(KERN_INFO "%s: Shutting down Ethernet card at %#x.\n",

		pr_info("%s: Shutting down Ethernet card at %#x.\n",

						dev->name, ioaddr);



	netif_stop_queue(dev);

drivers/net/3c503.c

+19 −17
Original line number Diff line number Diff line
@@ -234,16 +234,16 @@ el2_probe1(struct net_device *dev, int ioaddr) 
    }



    if (ei_debug  &&  version_printed++ == 0)

	printk(version);

	pr_debug("%s", version);



    dev->base_addr = ioaddr;



    printk("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr);

    pr_info("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr);



    /* Retrieve and print the ethernet address. */

    for (i = 0; i < 6; i++)

	dev->dev_addr[i] = inb(ioaddr + i);

    printk("%pM", dev->dev_addr);

    pr_cont("%pM", dev->dev_addr);



    /* Map the 8390 back into the window. */

    outb(ECNTRL_THIN, ioaddr + 0x406);
@@ -256,7 +256,8 @@ el2_probe1(struct net_device *dev, int ioaddr) 
    outb_p(E8390_PAGE0, ioaddr + E8390_CMD);



    /* Probe for, turn on and clear the board's shared memory. */

    if (ei_debug > 2) printk(" memory jumpers %2.2x ", membase_reg);

    if (ei_debug > 2)

	pr_cont(" memory jumpers %2.2x ", membase_reg);

    outb(EGACFR_NORM, ioaddr + 0x405);	/* Enable RAM */



    /* This should be probed for (or set via an ioctl()) at run-time.
@@ -268,7 +269,7 @@ el2_probe1(struct net_device *dev, int ioaddr) 
#else

    ei_status.interface_num = dev->mem_end & 0xf;

#endif

    printk(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex");

    pr_cont(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex");



    if ((membase_reg & 0xf0) == 0) {

	dev->mem_start = 0;
@@ -292,7 +293,7 @@ el2_probe1(struct net_device *dev, int ioaddr) 
		writel(test_val, mem_base + i);

		if (readl(mem_base) != 0xba5eba5e

		    || readl(mem_base + i) != test_val) {

		    printk("3c503: memory failure or memory address conflict.\n");

		    pr_warning("3c503: memory failure or memory address conflict.\n");

		    dev->mem_start = 0;

		    ei_status.name = "3c503-PIO";

		    iounmap(mem_base);
@@ -344,7 +345,7 @@ el2_probe1(struct net_device *dev, int ioaddr) 
    if (dev->irq == 2)

	dev->irq = 9;

    else if (dev->irq > 5 && dev->irq != 9) {

	printk("3c503: configured interrupt %d invalid, will use autoIRQ.\n",

	pr_warning("3c503: configured interrupt %d invalid, will use autoIRQ.\n",

	       dev->irq);

	dev->irq = 0;

    }
@@ -359,7 +360,7 @@ el2_probe1(struct net_device *dev, int ioaddr) 
	goto out1;



    if (dev->mem_start)

	printk("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n",

	pr_info("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n",

		dev->name, ei_status.name, (wordlength+1)<<3,

		dev->mem_start, dev->mem_end-1);
@@ -367,7 +368,7 @@ el2_probe1(struct net_device *dev, int ioaddr) 
    {

	ei_status.tx_start_page = EL2_MB1_START_PG;

	ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES;

	printk("\n%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n",

	pr_info("%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n",

	       dev->name, ei_status.name, (wordlength+1)<<3);

    }

    release_region(ioaddr + 0x400, 8);
@@ -435,15 +436,16 @@ static void 
el2_reset_8390(struct net_device *dev)

{

    if (ei_debug > 1) {

	printk("%s: Resetting the 3c503 board...", dev->name);

	printk("%#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),

	pr_debug("%s: Resetting the 3c503 board...", dev->name);

	pr_cont(" %#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR),

	       E33G_CNTRL, inb(E33G_CNTRL), E33G_GACFR, inb(E33G_GACFR));

    }

    outb_p(ECNTRL_RESET|ECNTRL_THIN, E33G_CNTRL);

    ei_status.txing = 0;

    outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL);

    el2_init_card(dev);

    if (ei_debug > 1) printk("done\n");

    if (ei_debug > 1)

	pr_cont("done\n");

}



/* Initialize the 3c503 GA registers after a reset. */
@@ -529,7 +531,7 @@ el2_block_output(struct net_device *dev, int count, 
        {

            if(!boguscount--)

            {

                printk("%s: FIFO blocked in el2_block_output.\n", dev->name);

                pr_notice("%s: FIFO blocked in el2_block_output.\n", dev->name);

                el2_reset_8390(dev);

                goto blocked;

            }
@@ -581,7 +583,7 @@ el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_pag 
    {

        if(!boguscount--)

        {

            printk("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name);

            pr_notice("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name);

            memset(hdr, 0x00, sizeof(struct e8390_pkt_hdr));

            el2_reset_8390(dev);

            goto blocked;
@@ -645,7 +647,7 @@ el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring 
        {

            if(!boguscount--)

            {

                printk("%s: FIFO blocked in el2_block_input.\n", dev->name);

                pr_notice("%s: FIFO blocked in el2_block_input.\n", dev->name);

                el2_reset_8390(dev);

                goto blocked;

            }
@@ -707,7 +709,7 @@ init_module(void) 
	for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) {

		if (io[this_dev] == 0)  {

			if (this_dev != 0) break; /* only autoprobe 1st one */

			printk(KERN_NOTICE "3c503.c: Presently autoprobing (not recommended) for a single card.\n");

			pr_notice("3c503.c: Presently autoprobing (not recommended) for a single card.\n");

		}

		dev = alloc_eip_netdev();

		if (!dev)
@@ -720,7 +722,7 @@ init_module(void) 
			continue;

		}

		free_netdev(dev);

		printk(KERN_WARNING "3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]);

		pr_warning("3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]);

		break;

	}

	if (found)

drivers/net/3c505.c

+111 −104

File changed.

Preview size limit exceeded, changes collapsed.

drivers/net/3c507.c

+26 −29
Original line number Diff line number Diff line
@@ -364,7 +364,7 @@ static const struct net_device_ops netdev_ops = { 


static int __init el16_probe1(struct net_device *dev, int ioaddr)

{

	static unsigned char init_ID_done, version_printed;

	static unsigned char init_ID_done;

	int i, irq, irqval, retval;

	struct net_local *lp;
@@ -391,10 +391,7 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr) 
		goto out;

	}



	if (net_debug  &&  version_printed++ == 0)

		printk(version);



	printk("%s: 3c507 at %#x,", dev->name, ioaddr);

	pr_info("%s: 3c507 at %#x,", dev->name, ioaddr);



	/* We should make a few more checks here, like the first three octets of

	   the S.A. for the manufacturer's code. */
@@ -403,7 +400,8 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr) 


	irqval = request_irq(irq, &el16_interrupt, 0, DRV_NAME, dev);

	if (irqval) {

		printk(KERN_ERR "3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval);

		pr_cont("\n");

		pr_err("3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval);

		retval = -EAGAIN;

		goto out;

	}
@@ -414,7 +412,7 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr) 
	outb(0x01, ioaddr + MISC_CTRL);

	for (i = 0; i < 6; i++)

		dev->dev_addr[i] = inb(ioaddr + i);

	printk(" %pM", dev->dev_addr);

	pr_cont(" %pM", dev->dev_addr);



	if (mem_start)

		net_debug = mem_start & 7;
@@ -443,18 +441,18 @@ static int __init el16_probe1(struct net_device *dev, int ioaddr) 
	dev->if_port = (inb(ioaddr + ROM_CONFIG) & 0x80) ? 1 : 0;

	dev->irq = inb(ioaddr + IRQ_CONFIG) & 0x0f;



	printk(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq,

	pr_cont(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq,

		   dev->if_port ? "ex" : "in", dev->mem_start, dev->mem_end-1);



	if (net_debug)

		printk(version);

		pr_debug("%s", version);



	lp = netdev_priv(dev);

 	memset(lp, 0, sizeof(*lp));

	spin_lock_init(&lp->lock);

	lp->base = ioremap(dev->mem_start, RX_BUF_END);

	if (!lp->base) {

		printk(KERN_ERR "3c507: unable to remap memory\n");

		pr_err("3c507: unable to remap memory\n");

		retval = -EAGAIN;

		goto out1;

	}
@@ -488,20 +486,20 @@ static void el16_tx_timeout (struct net_device *dev) 
	void __iomem *shmem = lp->base;



	if (net_debug > 1)

		printk ("%s: transmit timed out, %s?  ", dev->name,

		pr_debug("%s: transmit timed out, %s?  ", dev->name,

			readw(shmem + iSCB_STATUS) & 0x8000 ? "IRQ conflict" :

			"network cable problem");

	/* Try to restart the adaptor. */

	if (lp->last_restart == dev->stats.tx_packets) {

		if (net_debug > 1)

			printk ("Resetting board.\n");

			pr_cont("Resetting board.\n");

		/* Completely reset the adaptor. */

		init_82586_mem (dev);

		lp->tx_pkts_in_ring = 0;

	} else {

		/* Issue the channel attention signal and hope it "gets better". */

		if (net_debug > 1)

			printk ("Kicking board.\n");

			pr_cont("Kicking board.\n");

		writew(0xf000 | CUC_START | RX_START, shmem + iSCB_CMD);

		outb (0, ioaddr + SIGNAL_CA);	/* Issue channel-attn. */

		lp->last_restart = dev->stats.tx_packets;
@@ -553,7 +551,8 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id) 
	void __iomem *shmem;



	if (dev == NULL) {

		printk ("net_interrupt(): irq %d for unknown device.\n", irq);

		pr_err("%s: net_interrupt(): irq %d for unknown device.\n",

			dev->name, irq);

		return IRQ_NONE;

	}
@@ -566,7 +565,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id) 
	status = readw(shmem+iSCB_STATUS);



	if (net_debug > 4) {

		printk("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status);

		pr_debug("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status);

	}



	/* Disable the 82586's input to the interrupt line. */
@@ -577,7 +576,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id) 
	  unsigned short tx_status = readw(shmem+lp->tx_reap);

	  if (!(tx_status & 0x8000)) {

		if (net_debug > 5)

			printk("Tx command incomplete (%#x).\n", lp->tx_reap);

			pr_debug("Tx command incomplete (%#x).\n", lp->tx_reap);

		break;

	  }

	  /* Tx unsuccessful or some interesting status bit set. */
@@ -591,7 +590,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id) 
	  }

	  dev->stats.tx_packets++;

	  if (net_debug > 5)

		  printk("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);

		  pr_debug("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);

	  lp->tx_reap += TX_BUF_SIZE;

	  if (lp->tx_reap > RX_BUF_START - TX_BUF_SIZE)

		lp->tx_reap = TX_BUF_START;
@@ -606,7 +605,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id) 


	if (status & 0x4000) { /* Packet received. */

		if (net_debug > 5)

			printk("Received packet, rx_head %04x.\n", lp->rx_head);

			pr_debug("Received packet, rx_head %04x.\n", lp->rx_head);

		el16_rx(dev);

	}
@@ -615,7 +614,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id) 


	if ((status & 0x0700) != 0x0200 && netif_running(dev)) {

		if (net_debug)

			printk("%s: Command unit stopped, status %04x, restarting.\n",

			pr_debug("%s: Command unit stopped, status %04x, restarting.\n",

				   dev->name, status);

		/* If this ever occurs we should really re-write the idle loop, reset

		   the Tx list, and do a complete restart of the command unit.
@@ -627,7 +626,7 @@ static irqreturn_t el16_interrupt(int irq, void *dev_id) 
		/* The Rx unit is not ready, it must be hung.  Restart the receiver by

		   initializing the rx buffers, and issuing an Rx start command. */

		if (net_debug)

			printk("%s: Rx unit stopped, status %04x, restarting.\n",

			pr_debug("%s: Rx unit stopped, status %04x, restarting.\n",

				   dev->name, status);

		init_rx_bufs(dev);

		writew(RX_BUF_START,shmem+iSCB_RFA);
@@ -753,9 +752,8 @@ static void init_82586_mem(struct net_device *dev) 
		int boguscnt = 50;

		while (readw(shmem+iSCB_STATUS) == 0)

			if (--boguscnt == 0) {

				printk("%s: i82586 initialization timed out with status %04x, "

					   "cmd %04x.\n", dev->name,

					   readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD));

				pr_warning("%s: i82586 initialization timed out with status %04x, cmd %04x.\n",

					dev->name, readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD));

				break;

			}

		/* Issue channel-attn -- the 82586 won't start. */
@@ -765,7 +763,7 @@ static void init_82586_mem(struct net_device *dev) 
	/* Disable loopback and enable interrupts. */

	outb(0x84, ioaddr + MISC_CTRL);

	if (net_debug > 4)

		printk("%s: Initialized 82586, status %04x.\n", dev->name,

		pr_debug("%s: Initialized 82586, status %04x.\n", dev->name,

			   readw(shmem+iSCB_STATUS));

	return;

}
@@ -810,7 +808,7 @@ static void hardware_send_packet(struct net_device *dev, void *buf, short length 
		lp->tx_head = TX_BUF_START;



	if (net_debug > 4) {

		printk("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n",

		pr_debug("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n",

			   dev->name, ioaddr, length, tx_block, lp->tx_head);

	}
@@ -838,7 +836,7 @@ static void el16_rx(struct net_device *dev) 


		if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22

			|| (pkt_len & 0xC000) != 0xC000) {

			printk(KERN_ERR "%s: Rx frame at %#x corrupted, "

			pr_err("%s: Rx frame at %#x corrupted, "

			       "status %04x cmd %04x next %04x "

			       "data-buf @%04x %04x.\n",

			       dev->name, rx_head, frame_status, rfd_cmd,
@@ -858,8 +856,7 @@ static void el16_rx(struct net_device *dev) 
			pkt_len &= 0x3fff;

			skb = dev_alloc_skb(pkt_len+2);

			if (skb == NULL) {

				printk(KERN_ERR "%s: Memory squeeze, "

				       "dropping packet.\n",

				pr_err("%s: Memory squeeze, dropping packet.\n",

				       dev->name);

				dev->stats.rx_dropped++;

				break;
@@ -926,7 +923,7 @@ MODULE_PARM_DESC(irq, "(ignored)"); 
int __init init_module(void)

{

	if (io == 0)

		printk("3c507: You should not use auto-probing with insmod!\n");

		pr_notice("3c507: You should not use auto-probing with insmod!\n");

	dev_3c507 = el16_probe(-1);

	return IS_ERR(dev_3c507) ? PTR_ERR(dev_3c507) : 0;

}

drivers/net/3c509.c

+31 −33
Original line number Diff line number Diff line
@@ -257,7 +257,7 @@ static int el3_isa_id_sequence(__be16 *phys_addr) 
			    && !memcmp(phys_addr, el3_devs[i]->dev_addr,

				       ETH_ALEN)) {

				if (el3_debug > 3)

					printk(KERN_DEBUG "3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",

					pr_debug("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",

						phys_addr[0] & 0xff, phys_addr[0] >> 8,

						phys_addr[1] & 0xff, phys_addr[1] >> 8,

						phys_addr[2] & 0xff, phys_addr[2] >> 8);
@@ -574,19 +574,18 @@ static int __devinit el3_common_init(struct net_device *dev) 


	err = register_netdev(dev);

	if (err) {

		printk(KERN_ERR "Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n",

		pr_err("Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n",

			dev->base_addr, dev->irq);

		release_region(dev->base_addr, EL3_IO_EXTENT);

		return err;

	}



	printk(KERN_INFO "%s: 3c5x9 found at %#3.3lx, %s port, "

	       "address %pM, IRQ %d.\n",

	pr_info("%s: 3c5x9 found at %#3.3lx, %s port, address %pM, IRQ %d.\n",

	       dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)],

	       dev->dev_addr, dev->irq);



	if (el3_debug > 0)

		printk(KERN_INFO "%s", version);

		pr_info("%s", version);

	return 0;



}
@@ -625,7 +624,7 @@ static int __init el3_mca_probe(struct device *device) 
	irq = pos5 & 0x0f;





	printk(KERN_INFO "3c529: found %s at slot %d\n",

	pr_info("3c529: found %s at slot %d\n",

		el3_mca_adapter_names[mdev->index], slot + 1);



	/* claim the slot */
@@ -638,7 +637,7 @@ static int __init el3_mca_probe(struct device *device) 
	irq = mca_device_transform_irq(mdev, irq);

	ioaddr = mca_device_transform_ioport(mdev, ioaddr);

	if (el3_debug > 2) {

			printk(KERN_DEBUG "3c529: irq %d  ioaddr 0x%x  ifport %d\n", irq, ioaddr, if_port);

		pr_debug("3c529: irq %d  ioaddr 0x%x  ifport %d\n", irq, ioaddr, if_port);

	}

	EL3WINDOW(0);

	for (i = 0; i < 3; i++)
@@ -761,7 +760,7 @@ static ushort id_read_eeprom(int index) 
		word = (word << 1) + (inb(id_port) & 0x01);



	if (el3_debug > 3)

		printk(KERN_DEBUG "  3c509 EEPROM word %d %#4.4x.\n", index, word);

		pr_debug("  3c509 EEPROM word %d %#4.4x.\n", index, word);



	return word;

}
@@ -783,13 +782,13 @@ el3_open(struct net_device *dev) 


	EL3WINDOW(0);

	if (el3_debug > 3)

		printk(KERN_DEBUG "%s: Opening, IRQ %d	 status@%x %4.4x.\n", dev->name,

		pr_debug("%s: Opening, IRQ %d	 status@%x %4.4x.\n", dev->name,

			   dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS));



	el3_up(dev);



	if (el3_debug > 3)

		printk(KERN_DEBUG "%s: Opened 3c509  IRQ %d  status %4.4x.\n",

		pr_debug("%s: Opened 3c509  IRQ %d  status %4.4x.\n",

			   dev->name, dev->irq, inw(ioaddr + EL3_STATUS));



	return 0;
@@ -801,8 +800,7 @@ el3_tx_timeout (struct net_device *dev) 
	int ioaddr = dev->base_addr;



	/* Transmitter timeout, serious problems. */

	printk(KERN_WARNING "%s: transmit timed out, Tx_status %2.2x status %4.4x "

		   "Tx FIFO room %d.\n",

	pr_warning("%s: transmit timed out, Tx_status %2.2x status %4.4x Tx FIFO room %d.\n",

		   dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS),

		   inw(ioaddr + TX_FREE));

	dev->stats.tx_errors++;
@@ -826,7 +824,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev) 
	dev->stats.tx_bytes += skb->len;



	if (el3_debug > 4) {

		printk(KERN_DEBUG "%s: el3_start_xmit(length = %u) called, status %4.4x.\n",

		pr_debug("%s: el3_start_xmit(length = %u) called, status %4.4x.\n",

			   dev->name, skb->len, inw(ioaddr + EL3_STATUS));

	}

#if 0
@@ -835,7 +833,7 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev) 
		ushort status = inw(ioaddr + EL3_STATUS);

		if (status & 0x0001 		/* IRQ line active, missed one. */

			&& inw(ioaddr + EL3_STATUS) & 1) { 			/* Make sure. */

			printk(KERN_DEBUG "%s: Missed interrupt, status then %04x now %04x"

			pr_debug("%s: Missed interrupt, status then %04x now %04x"

				   "  Tx %2.2x Rx %4.4x.\n", dev->name, status,

				   inw(ioaddr + EL3_STATUS), inb(ioaddr + TX_STATUS),

				   inw(ioaddr + RX_STATUS));
@@ -909,7 +907,7 @@ el3_interrupt(int irq, void *dev_id) 


	if (el3_debug > 4) {

		status = inw(ioaddr + EL3_STATUS);

		printk(KERN_DEBUG "%s: interrupt, status %4.4x.\n", dev->name, status);

		pr_debug("%s: interrupt, status %4.4x.\n", dev->name, status);

	}



	while ((status = inw(ioaddr + EL3_STATUS)) &
@@ -920,7 +918,7 @@ el3_interrupt(int irq, void *dev_id) 


		if (status & TxAvailable) {

			if (el3_debug > 5)

				printk(KERN_DEBUG "	TX room bit was handled.\n");

				pr_debug("	TX room bit was handled.\n");

			/* There's room in the FIFO for a full-sized packet. */

			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);

			netif_wake_queue (dev);
@@ -958,7 +956,7 @@ el3_interrupt(int irq, void *dev_id) 
		}



		if (--i < 0) {

			printk(KERN_ERR "%s: Infinite loop in interrupt, status %4.4x.\n",

			pr_err("%s: Infinite loop in interrupt, status %4.4x.\n",

				   dev->name, status);

			/* Clear all interrupts. */

			outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
@@ -969,7 +967,7 @@ el3_interrupt(int irq, void *dev_id) 
	}



	if (el3_debug > 4) {

		printk(KERN_DEBUG "%s: exiting interrupt, status %4.4x.\n", dev->name,

		pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name,

			   inw(ioaddr + EL3_STATUS));

	}

	spin_unlock(&lp->lock);
@@ -1017,7 +1015,7 @@ static void update_stats(struct net_device *dev) 
	int ioaddr = dev->base_addr;



	if (el3_debug > 5)

		printk("   Updating the statistics.\n");

		pr_debug("   Updating the statistics.\n");

	/* Turn off statistics updates while reading. */

	outw(StatsDisable, ioaddr + EL3_CMD);

	/* Switch to the stats window, and read everything. */
@@ -1047,7 +1045,7 @@ el3_rx(struct net_device *dev) 
	short rx_status;



	if (el3_debug > 5)

		printk("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",

		pr_debug("   In rx_packet(), status %4.4x, rx_status %4.4x.\n",

			   inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));

	while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) {

		if (rx_status & 0x4000) { /* Error, update stats. */
@@ -1069,7 +1067,7 @@ el3_rx(struct net_device *dev) 


			skb = dev_alloc_skb(pkt_len+5);

			if (el3_debug > 4)

				printk("Receiving packet size %d status %4.4x.\n",

				pr_debug("Receiving packet size %d status %4.4x.\n",

					   pkt_len, rx_status);

			if (skb != NULL) {

				skb_reserve(skb, 2);     /* Align IP on 16 byte */
@@ -1088,12 +1086,12 @@ el3_rx(struct net_device *dev) 
			outw(RxDiscard, ioaddr + EL3_CMD);

			dev->stats.rx_dropped++;

			if (el3_debug)

				printk("%s: Couldn't allocate a sk_buff of size %d.\n",

				pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n",

					   dev->name, pkt_len);

		}

		inw(ioaddr + EL3_STATUS); 				/* Delay. */

		while (inw(ioaddr + EL3_STATUS) & 0x1000)

			printk(KERN_DEBUG "	Waiting for 3c509 to discard packet, status %x.\n",

			pr_debug("	Waiting for 3c509 to discard packet, status %x.\n",

				   inw(ioaddr + EL3_STATUS) );

	}
@@ -1114,7 +1112,7 @@ set_multicast_list(struct net_device *dev) 
		static int old;

		if (old != dev->mc_count) {

			old = dev->mc_count;

			printk("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);

			pr_debug("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);

		}

	}

	spin_lock_irqsave(&lp->lock, flags);
@@ -1137,7 +1135,7 @@ el3_close(struct net_device *dev) 
	struct el3_private *lp = netdev_priv(dev);



	if (el3_debug > 2)

		printk("%s: Shutting down ethercard.\n", dev->name);

		pr_debug("%s: Shutting down ethercard.\n", dev->name);



	el3_down(dev);
@@ -1384,30 +1382,30 @@ el3_up(struct net_device *dev) 
		EL3WINDOW(4);

		net_diag = inw(ioaddr + WN4_NETDIAG);

		net_diag = (net_diag | FD_ENABLE); /* temporarily assume full-duplex will be set */

		printk("%s: ", dev->name);

		pr_info("%s: ", dev->name);

		switch (dev->if_port & 0x0c) {

			case 12:

				/* force full-duplex mode if 3c5x9b */

				if (sw_info & 0x000f) {

					printk("Forcing 3c5x9b full-duplex mode");

					pr_cont("Forcing 3c5x9b full-duplex mode");

					break;

				}

			case 8:

				/* set full-duplex mode based on eeprom config setting */

				if ((sw_info & 0x000f) && (sw_info & 0x8000)) {

					printk("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)");

					pr_cont("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)");

					break;

				}

			default:

				/* xcvr=(0 || 4) OR user has an old 3c5x9 non "B" model */

				printk("Setting 3c5x9/3c5x9B half-duplex mode");

				pr_cont("Setting 3c5x9/3c5x9B half-duplex mode");

				net_diag = (net_diag & ~FD_ENABLE); /* disable full duplex */

		}



		outw(net_diag, ioaddr + WN4_NETDIAG);

		printk(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info);

		pr_cont(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info);

		if (el3_debug > 3)

			printk("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag);

			pr_debug("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag);

		/* Enable link beat and jabber check. */

		outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA);

	}
@@ -1535,7 +1533,7 @@ static int __init el3_init_module(void) 
	}

	if (id_port >= 0x200) {

		id_port = 0;

		printk(KERN_ERR "No I/O port available for 3c509 activation.\n");

		pr_err("No I/O port available for 3c509 activation.\n");

	} else {

		ret = isa_register_driver(&el3_isa_driver, EL3_MAX_CARDS);

		if (!ret)