Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 61045dbe authored by Jochen Friedrich's avatar Jochen Friedrich Committed by Jean Delvare
Browse files

i2c: Add support for I2C bus on Freescale CPM1/CPM2 controllers 



This driver uses the port of 2.4 code from Vitaly Bordug
<vitb@kernel.crashing.org> and the actual algorithm used by the i2c
driver of the DBox code on cvs.tuxboc.org from Felix Domke
(tmbinc@gmx.net) and Gillem (htoa@gmx.net) converted to an
of_platform_driver. Tested on CPM1 (MPC823 on dbox2 hardware) and
CPM2 (MPC8272).

Signed-off-by: default avatarJochen Friedrich <jochen@scram.de>
Tested-by: default avatarWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 77e38bff

drivers/i2c/busses/Kconfig

+10 −0
Original line number Diff line number Diff line
@@ -299,6 +299,16 @@ config I2C_BLACKFIN_TWI_CLK_KHZ 
	help

	  The unit of the TWI clock is kHz.



config I2C_CPM

	tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"

	depends on (CPM1 || CPM2) && OF_I2C

	help

	  This supports the use of the I2C interface on Freescale

	  processors with CPM1 or CPM2.



	  This driver can also be built as a module.  If so, the module

	  will be called i2c-cpm.



config I2C_DAVINCI

	tristate "DaVinci I2C driver"

	depends on ARCH_DAVINCI

drivers/i2c/busses/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -28,6 +28,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o 
obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o

obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o

obj-$(CONFIG_I2C_BLACKFIN_TWI)	+= i2c-bfin-twi.o

obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o

obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o

obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o

obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o

drivers/i2c/busses/i2c-cpm.c

0 → 100644
+745 −0
Original line number Diff line number Diff line 
/*

 * Freescale CPM1/CPM2 I2C interface.

 * Copyright (c) 1999 Dan Malek (dmalek@jlc.net).

 *

 * moved into proper i2c interface;

 * Brad Parker (brad@heeltoe.com)

 *

 * Parts from dbox2_i2c.c (cvs.tuxbox.org)

 * (C) 2000-2001 Felix Domke (tmbinc@gmx.net), Gillem (htoa@gmx.net)

 *

 * (C) 2007 Montavista Software, Inc.

 * Vitaly Bordug <vitb@kernel.crashing.org>

 *

 * Converted to of_platform_device. Renamed to i2c-cpm.c.

 * (C) 2007,2008 Jochen Friedrich <jochen@scram.de>

 *

 *  This program is free software; you can redistribute it and/or modify

 *  it under the terms of the GNU General Public License as published by

 *  the Free Software Foundation; either version 2 of the License, or

 *  (at your option) any later version.

 *

 *  This program is distributed in the hope that it will be useful,

 *  but WITHOUT ANY WARRANTY; without even the implied warranty of

 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *  GNU General Public License for more details.

 *

 *  You should have received a copy of the GNU General Public License

 *  along with this program; if not, write to the Free Software

 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

 */



#include <linux/kernel.h>

#include <linux/module.h>

#include <linux/delay.h>

#include <linux/slab.h>

#include <linux/init.h>

#include <linux/interrupt.h>

#include <linux/errno.h>

#include <linux/stddef.h>

#include <linux/i2c.h>

#include <linux/io.h>

#include <linux/dma-mapping.h>

#include <linux/of_device.h>

#include <linux/of_platform.h>

#include <linux/of_i2c.h>

#include <sysdev/fsl_soc.h>

#include <asm/cpm.h>



/* Try to define this if you have an older CPU (earlier than rev D4) */

/* However, better use a GPIO based bitbang driver in this case :/   */

#undef	I2C_CHIP_ERRATA



#define CPM_MAX_READ    513

#define CPM_MAXBD       4



#define I2C_EB			(0x10) /* Big endian mode */

#define I2C_EB_CPM2		(0x30) /* Big endian mode, memory snoop */



#define DPRAM_BASE		((u8 __iomem __force *)cpm_muram_addr(0))



/* I2C parameter RAM. */

struct i2c_ram {

	ushort  rbase;		/* Rx Buffer descriptor base address */

	ushort  tbase;		/* Tx Buffer descriptor base address */

	u_char  rfcr;		/* Rx function code */

	u_char  tfcr;		/* Tx function code */

	ushort  mrblr;		/* Max receive buffer length */

	uint    rstate;		/* Internal */

	uint    rdp;		/* Internal */

	ushort  rbptr;		/* Rx Buffer descriptor pointer */

	ushort  rbc;		/* Internal */

	uint    rxtmp;		/* Internal */

	uint    tstate;		/* Internal */

	uint    tdp;		/* Internal */

	ushort  tbptr;		/* Tx Buffer descriptor pointer */

	ushort  tbc;		/* Internal */

	uint    txtmp;		/* Internal */

	char    res1[4];	/* Reserved */

	ushort  rpbase;		/* Relocation pointer */

	char    res2[2];	/* Reserved */

};



#define I2COM_START	0x80

#define I2COM_MASTER	0x01

#define I2CER_TXE	0x10

#define I2CER_BUSY	0x04

#define I2CER_TXB	0x02

#define I2CER_RXB	0x01

#define I2MOD_EN	0x01



/* I2C Registers */

struct i2c_reg {

	u8	i2mod;

	u8	res1[3];

	u8	i2add;

	u8	res2[3];

	u8	i2brg;

	u8	res3[3];

	u8	i2com;

	u8	res4[3];

	u8	i2cer;

	u8	res5[3];

	u8	i2cmr;

};



struct cpm_i2c {

	char *base;

	struct of_device *ofdev;

	struct i2c_adapter adap;

	uint dp_addr;

	int version; /* CPM1=1, CPM2=2 */

	int irq;

	int cp_command;

	int freq;

	struct i2c_reg __iomem *i2c_reg;

	struct i2c_ram __iomem *i2c_ram;

	u16 i2c_addr;

	wait_queue_head_t i2c_wait;

	cbd_t __iomem *tbase;

	cbd_t __iomem *rbase;

	u_char *txbuf[CPM_MAXBD];

	u_char *rxbuf[CPM_MAXBD];

	u32 txdma[CPM_MAXBD];

	u32 rxdma[CPM_MAXBD];

};



static irqreturn_t cpm_i2c_interrupt(int irq, void *dev_id)

{

	struct cpm_i2c *cpm;

	struct i2c_reg __iomem *i2c_reg;

	struct i2c_adapter *adap = dev_id;

	int i;



	cpm = i2c_get_adapdata(dev_id);

	i2c_reg = cpm->i2c_reg;



	/* Clear interrupt. */

	i = in_8(&i2c_reg->i2cer);

	out_8(&i2c_reg->i2cer, i);



	dev_dbg(&adap->dev, "Interrupt: %x\n", i);



	wake_up_interruptible(&cpm->i2c_wait);



	return i ? IRQ_HANDLED : IRQ_NONE;

}



static void cpm_reset_i2c_params(struct cpm_i2c *cpm)

{

	struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram;



	/* Set up the I2C parameters in the parameter ram. */

	out_be16(&i2c_ram->tbase, (u8 __iomem *)cpm->tbase - DPRAM_BASE);

	out_be16(&i2c_ram->rbase, (u8 __iomem *)cpm->rbase - DPRAM_BASE);



	if (cpm->version == 1) {

		out_8(&i2c_ram->tfcr, I2C_EB);

		out_8(&i2c_ram->rfcr, I2C_EB);

	} else {

		out_8(&i2c_ram->tfcr, I2C_EB_CPM2);

		out_8(&i2c_ram->rfcr, I2C_EB_CPM2);

	}



	out_be16(&i2c_ram->mrblr, CPM_MAX_READ);



	out_be32(&i2c_ram->rstate, 0);

	out_be32(&i2c_ram->rdp, 0);

	out_be16(&i2c_ram->rbptr, 0);

	out_be16(&i2c_ram->rbc, 0);

	out_be32(&i2c_ram->rxtmp, 0);

	out_be32(&i2c_ram->tstate, 0);

	out_be32(&i2c_ram->tdp, 0);

	out_be16(&i2c_ram->tbptr, 0);

	out_be16(&i2c_ram->tbc, 0);

	out_be32(&i2c_ram->txtmp, 0);

}



static void cpm_i2c_force_close(struct i2c_adapter *adap)

{

	struct cpm_i2c *cpm = i2c_get_adapdata(adap);

	struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg;



	dev_dbg(&adap->dev, "cpm_i2c_force_close()\n");



	cpm_command(cpm->cp_command, CPM_CR_CLOSE_RX_BD);



	out_8(&i2c_reg->i2cmr, 0x00);	/* Disable all interrupts */

	out_8(&i2c_reg->i2cer, 0xff);

}



static void cpm_i2c_parse_message(struct i2c_adapter *adap,

	struct i2c_msg *pmsg, int num, int tx, int rx)

{

	cbd_t __iomem *tbdf;

	cbd_t __iomem *rbdf;

	u_char addr;

	u_char *tb;

	u_char *rb;

	struct cpm_i2c *cpm = i2c_get_adapdata(adap);



	tbdf = cpm->tbase + tx;

	rbdf = cpm->rbase + rx;



	addr = pmsg->addr << 1;

	if (pmsg->flags & I2C_M_RD)

		addr |= 1;



	tb = cpm->txbuf[tx];

	rb = cpm->rxbuf[rx];



	/* Align read buffer */

	rb = (u_char *) (((ulong) rb + 1) & ~1);



	tb[0] = addr;		/* Device address byte w/rw flag */



	out_be16(&tbdf->cbd_datlen, pmsg->len + 1);

	out_be16(&tbdf->cbd_sc, 0);



	if (!(pmsg->flags & I2C_M_NOSTART))

		setbits16(&tbdf->cbd_sc, BD_I2C_START);



	if (tx + 1 == num)

		setbits16(&tbdf->cbd_sc, BD_SC_LAST | BD_SC_WRAP);



	if (pmsg->flags & I2C_M_RD) {

		/*

		 * To read, we need an empty buffer of the proper length.

		 * All that is used is the first byte for address, the remainder

		 * is just used for timing (and doesn't really have to exist).

		 */



		dev_dbg(&adap->dev, "cpm_i2c_read(abyte=0x%x)\n", addr);



		out_be16(&rbdf->cbd_datlen, 0);

		out_be16(&rbdf->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT);



		if (rx + 1 == CPM_MAXBD)

			setbits16(&rbdf->cbd_sc, BD_SC_WRAP);



		eieio();

		setbits16(&tbdf->cbd_sc, BD_SC_READY);

	} else {

		dev_dbg(&adap->dev, "cpm_iic_write(abyte=0x%x)\n", addr);



		memcpy(tb+1, pmsg->buf, pmsg->len);



		eieio();

		setbits16(&tbdf->cbd_sc, BD_SC_READY | BD_SC_INTRPT);

	}

}



static int cpm_i2c_check_message(struct i2c_adapter *adap,

	struct i2c_msg *pmsg, int tx, int rx)

{

	cbd_t __iomem *tbdf;

	cbd_t __iomem *rbdf;

	u_char *tb;

	u_char *rb;

	struct cpm_i2c *cpm = i2c_get_adapdata(adap);



	tbdf = cpm->tbase + tx;

	rbdf = cpm->rbase + rx;



	tb = cpm->txbuf[tx];

	rb = cpm->rxbuf[rx];



	/* Align read buffer */

	rb = (u_char *) (((uint) rb + 1) & ~1);



	eieio();

	if (pmsg->flags & I2C_M_RD) {

		dev_dbg(&adap->dev, "tx sc 0x%04x, rx sc 0x%04x\n",

			in_be16(&tbdf->cbd_sc), in_be16(&rbdf->cbd_sc));



		if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) {

			dev_dbg(&adap->dev, "I2C read; No ack\n");

			return -ENXIO;

		}

		if (in_be16(&rbdf->cbd_sc) & BD_SC_EMPTY) {

			dev_err(&adap->dev,

				"I2C read; complete but rbuf empty\n");

			return -EREMOTEIO;

		}

		if (in_be16(&rbdf->cbd_sc) & BD_SC_OV) {

			dev_err(&adap->dev, "I2C read; Overrun\n");

			return -EREMOTEIO;

		}

		memcpy(pmsg->buf, rb, pmsg->len);

	} else {

		dev_dbg(&adap->dev, "tx sc %d 0x%04x\n", tx,

			in_be16(&tbdf->cbd_sc));



		if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) {

			dev_dbg(&adap->dev, "I2C write; No ack\n");

			return -ENXIO;

		}

		if (in_be16(&tbdf->cbd_sc) & BD_SC_UN) {

			dev_err(&adap->dev, "I2C write; Underrun\n");

			return -EIO;

		}

		if (in_be16(&tbdf->cbd_sc) & BD_SC_CL) {

			dev_err(&adap->dev, "I2C write; Collision\n");

			return -EIO;

		}

	}

	return 0;

}



static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)

{

	struct cpm_i2c *cpm = i2c_get_adapdata(adap);

	struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg;

	struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram;

	struct i2c_msg *pmsg;

	int ret, i;

	int tptr;

	int rptr;

	cbd_t __iomem *tbdf;

	cbd_t __iomem *rbdf;



	if (num > CPM_MAXBD)

		return -EINVAL;



	/* Check if we have any oversized READ requests */

	for (i = 0; i < num; i++) {

		pmsg = &msgs[i];

		if (pmsg->len >= CPM_MAX_READ)

			return -EINVAL;

	}



	/* Reset to use first buffer */

	out_be16(&i2c_ram->rbptr, in_be16(&i2c_ram->rbase));

	out_be16(&i2c_ram->tbptr, in_be16(&i2c_ram->tbase));



	tbdf = cpm->tbase;

	rbdf = cpm->rbase;



	tptr = 0;

	rptr = 0;



	while (tptr < num) {

		pmsg = &msgs[tptr];

		dev_dbg(&adap->dev, "R: %d T: %d\n", rptr, tptr);



		cpm_i2c_parse_message(adap, pmsg, num, tptr, rptr);

		if (pmsg->flags & I2C_M_RD)

			rptr++;

		tptr++;

	}

	/* Start transfer now */

	/* Enable RX/TX/Error interupts */

	out_8(&i2c_reg->i2cmr, I2CER_BUSY | I2CER_TXB | I2CER_RXB);

	out_8(&i2c_reg->i2cer, 0xff);	/* Clear interrupt status */

	/* Chip bug, set enable here */

	setbits8(&i2c_reg->i2mod, I2MOD_EN);	/* Enable */

	/* Begin transmission */

	setbits8(&i2c_reg->i2com, I2COM_START);



	tptr = 0;

	rptr = 0;



	while (tptr < num) {

		/* Check for outstanding messages */

		dev_dbg(&adap->dev, "test ready.\n");

		pmsg = &msgs[tptr];

		if (pmsg->flags & I2C_M_RD)

			ret = wait_event_interruptible_timeout(cpm->i2c_wait,

				!(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),

				1 * HZ);

		else

			ret = wait_event_interruptible_timeout(cpm->i2c_wait,

				!(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_READY),

				1 * HZ);

		if (ret == 0) {

			ret = -EREMOTEIO;

			dev_err(&adap->dev, "I2C transfer: timeout\n");

			goto out_err;

		}

		if (ret > 0) {

			dev_dbg(&adap->dev, "ready.\n");

			ret = cpm_i2c_check_message(adap, pmsg, tptr, rptr);

			tptr++;

			if (pmsg->flags & I2C_M_RD)

				rptr++;

			if (ret)

				goto out_err;

		}

	}

#ifdef I2C_CHIP_ERRATA

	/*

	 * Chip errata, clear enable. This is not needed on rev D4 CPUs.

	 * Disabling I2C too early may cause too short stop condition

	 */

	udelay(4);

	clrbits8(&i2c_reg->i2mod, I2MOD_EN);

#endif

	return (num);



out_err:

	cpm_i2c_force_close(adap);

#ifdef I2C_CHIP_ERRATA

	/*

	 * Chip errata, clear enable. This is not needed on rev D4 CPUs.

	 */

	clrbits8(&i2c_reg->i2mod, I2MOD_EN);

#endif

	return ret;

}



static u32 cpm_i2c_func(struct i2c_adapter *adap)

{

	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);

}



/* -----exported algorithm data: -------------------------------------	*/



static const struct i2c_algorithm cpm_i2c_algo = {

	.master_xfer = cpm_i2c_xfer,

	.functionality = cpm_i2c_func,

};



static const struct i2c_adapter cpm_ops = {

	.owner		= THIS_MODULE,

	.name		= "i2c-cpm",

	.algo		= &cpm_i2c_algo,

	.class		= I2C_CLASS_HWMON,

};



static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)

{

	struct of_device *ofdev = cpm->ofdev;

	const u32 *data;

	int len, ret, i;

	void __iomem *i2c_base;

	cbd_t __iomem *tbdf;

	cbd_t __iomem *rbdf;

	unsigned char brg;



	dev_dbg(&cpm->ofdev->dev, "cpm_i2c_setup()\n");



	init_waitqueue_head(&cpm->i2c_wait);



	cpm->irq = of_irq_to_resource(ofdev->node, 0, NULL);

	if (cpm->irq == NO_IRQ)

		return -EINVAL;



	/* Install interrupt handler. */

	ret = request_irq(cpm->irq, cpm_i2c_interrupt, 0, "cpm_i2c",

			  &cpm->adap);

	if (ret)

		return ret;



	/* I2C parameter RAM */

	i2c_base = of_iomap(ofdev->node, 1);

	if (i2c_base == NULL) {

		ret = -EINVAL;

		goto out_irq;

	}



	if (of_device_is_compatible(ofdev->node, "fsl,cpm1-i2c")) {



		/* Check for and use a microcode relocation patch. */

		cpm->i2c_ram = i2c_base;

		cpm->i2c_addr = in_be16(&cpm->i2c_ram->rpbase);



		/*

		 * Maybe should use cpm_muram_alloc instead of hardcoding

		 * this in micropatch.c

		 */

		if (cpm->i2c_addr) {

			cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr);

			iounmap(i2c_base);

		}



		cpm->version = 1;



	} else if (of_device_is_compatible(ofdev->node, "fsl,cpm2-i2c")) {

		cpm->i2c_addr = cpm_muram_alloc(sizeof(struct i2c_ram), 64);

		cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr);

		out_be16(i2c_base, cpm->i2c_addr);

		iounmap(i2c_base);



		cpm->version = 2;



	} else {

		iounmap(i2c_base);

		ret = -EINVAL;

		goto out_irq;

	}



	/* I2C control/status registers */

	cpm->i2c_reg = of_iomap(ofdev->node, 0);

	if (cpm->i2c_reg == NULL) {

		ret = -EINVAL;

		goto out_ram;

	}



	data = of_get_property(ofdev->node, "fsl,cpm-command", &len);

	if (!data || len != 4) {

		ret = -EINVAL;

		goto out_reg;

	}

	cpm->cp_command = *data;



	data = of_get_property(ofdev->node, "linux,i2c-class", &len);

	if (data && len == 4)

		cpm->adap.class = *data;



	data = of_get_property(ofdev->node, "clock-frequency", &len);

	if (data && len == 4)

		cpm->freq = *data;

	else

		cpm->freq = 60000; /* use 60kHz i2c clock by default */



	/*

	 * Allocate space for CPM_MAXBD transmit and receive buffer

	 * descriptors in the DP ram.

	 */

	cpm->dp_addr = cpm_muram_alloc(sizeof(cbd_t) * 2 * CPM_MAXBD, 8);

	if (!cpm->dp_addr) {

		ret = -ENOMEM;

		goto out_reg;

	}



	cpm->tbase = cpm_muram_addr(cpm->dp_addr);

	cpm->rbase = cpm_muram_addr(cpm->dp_addr + sizeof(cbd_t) * CPM_MAXBD);



	/* Allocate TX and RX buffers */



	tbdf = cpm->tbase;

	rbdf = cpm->rbase;



	for (i = 0; i < CPM_MAXBD; i++) {

		cpm->rxbuf[i] = dma_alloc_coherent(

			NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL);

		if (!cpm->rxbuf[i]) {

			ret = -ENOMEM;

			goto out_muram;

		}

		out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1));



		cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(

			NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);

		if (!cpm->txbuf[i]) {

			ret = -ENOMEM;

			goto out_muram;

		}

		out_be32(&tbdf[i].cbd_bufaddr, cpm->txdma[i]);

	}



	/* Initialize Tx/Rx parameters. */



	cpm_reset_i2c_params(cpm);



	dev_dbg(&cpm->ofdev->dev, "i2c_ram %p, i2c_addr 0x%04x\n",

		cpm->i2c_ram, cpm->i2c_addr);

	dev_dbg(&cpm->ofdev->dev, "tbase 0x%04x, rbase 0x%04x\n",

		(u8 __iomem *)cpm->tbase - DPRAM_BASE,

		(u8 __iomem *)cpm->rbase - DPRAM_BASE);



	cpm_command(cpm->cp_command, CPM_CR_INIT_TRX);



	/*

	 * Select an invalid address. Just make sure we don't use loopback mode

	 */

	out_8(&cpm->i2c_reg->i2add, 0x7f << 1);



	/*

	 * PDIV is set to 00 in i2mod, so brgclk/32 is used as input to the

	 * i2c baud rate generator. This is divided by 2 x (DIV + 3) to get

	 * the actual i2c bus frequency.

	 */

	brg = get_brgfreq() / (32 * 2 * cpm->freq) - 3;

	out_8(&cpm->i2c_reg->i2brg, brg);



	out_8(&cpm->i2c_reg->i2mod, 0x00);

	out_8(&cpm->i2c_reg->i2com, I2COM_MASTER);	/* Master mode */



	/* Disable interrupts. */

	out_8(&cpm->i2c_reg->i2cmr, 0);

	out_8(&cpm->i2c_reg->i2cer, 0xff);



	return 0;



out_muram:

	for (i = 0; i < CPM_MAXBD; i++) {

		if (cpm->rxbuf[i])

			dma_free_coherent(NULL, CPM_MAX_READ + 1,

				cpm->rxbuf[i], cpm->rxdma[i]);

		if (cpm->txbuf[i])

			dma_free_coherent(NULL, CPM_MAX_READ + 1,

				cpm->txbuf[i], cpm->txdma[i]);

	}

	cpm_muram_free(cpm->dp_addr);

out_reg:

	iounmap(cpm->i2c_reg);

out_ram:

	if ((cpm->version == 1) && (!cpm->i2c_addr))

		iounmap(cpm->i2c_ram);

	if (cpm->version == 2)

		cpm_muram_free(cpm->i2c_addr);

out_irq:

	free_irq(cpm->irq, &cpm->adap);

	return ret;

}



static void cpm_i2c_shutdown(struct cpm_i2c *cpm)

{

	int i;



	/* Shut down I2C. */

	clrbits8(&cpm->i2c_reg->i2mod, I2MOD_EN);



	/* Disable interrupts */

	out_8(&cpm->i2c_reg->i2cmr, 0);

	out_8(&cpm->i2c_reg->i2cer, 0xff);



	free_irq(cpm->irq, &cpm->adap);



	/* Free all memory */

	for (i = 0; i < CPM_MAXBD; i++) {

		dma_free_coherent(NULL, CPM_MAX_READ + 1,

			cpm->rxbuf[i], cpm->rxdma[i]);

		dma_free_coherent(NULL, CPM_MAX_READ + 1,

			cpm->txbuf[i], cpm->txdma[i]);

	}



	cpm_muram_free(cpm->dp_addr);

	iounmap(cpm->i2c_reg);



	if ((cpm->version == 1) && (!cpm->i2c_addr))

		iounmap(cpm->i2c_ram);

	if (cpm->version == 2)

		cpm_muram_free(cpm->i2c_addr);

}



static int __devinit cpm_i2c_probe(struct of_device *ofdev,

			 const struct of_device_id *match)

{

	int result, len;

	struct cpm_i2c *cpm;

	const u32 *data;



	cpm = kzalloc(sizeof(struct cpm_i2c), GFP_KERNEL);

	if (!cpm)

		return -ENOMEM;



	cpm->ofdev = ofdev;



	dev_set_drvdata(&ofdev->dev, cpm);



	cpm->adap = cpm_ops;

	i2c_set_adapdata(&cpm->adap, cpm);

	cpm->adap.dev.parent = &ofdev->dev;



	result = cpm_i2c_setup(cpm);

	if (result) {

		dev_err(&ofdev->dev, "Unable to init hardware\n");

		goto out_free;

	}



	/* register new adapter to i2c module... */



	data = of_get_property(ofdev->node, "linux,i2c-index", &len);

	if (data && len == 4) {

		cpm->adap.nr = *data;

		result = i2c_add_numbered_adapter(&cpm->adap);

	} else

		result = i2c_add_adapter(&cpm->adap);



	if (result < 0) {

		dev_err(&ofdev->dev, "Unable to register with I2C\n");

		goto out_shut;

	}



	dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",

		cpm->adap.name);



	/*

	 * register OF I2C devices

	 */

	of_register_i2c_devices(&cpm->adap, ofdev->node);



	return 0;

out_shut:

	cpm_i2c_shutdown(cpm);

out_free:

	dev_set_drvdata(&ofdev->dev, NULL);

	kfree(cpm);



	return result;

}



static int __devexit cpm_i2c_remove(struct of_device *ofdev)

{

	struct cpm_i2c *cpm = dev_get_drvdata(&ofdev->dev);



	i2c_del_adapter(&cpm->adap);



	cpm_i2c_shutdown(cpm);



	dev_set_drvdata(&ofdev->dev, NULL);

	kfree(cpm);



	return 0;

}



static const struct of_device_id cpm_i2c_match[] = {

	{

		.compatible = "fsl,cpm1-i2c",

	},

	{

		.compatible = "fsl,cpm2-i2c",

	},

	{},

};



MODULE_DEVICE_TABLE(of, cpm_i2c_match);



static struct of_platform_driver cpm_i2c_driver = {

	.match_table	= cpm_i2c_match,

	.probe		= cpm_i2c_probe,

	.remove		= __devexit_p(cpm_i2c_remove),

	.driver		= {

		.name	= "fsl-i2c-cpm",

		.owner	= THIS_MODULE,

	}

};



static int __init cpm_i2c_init(void)

{

	return of_register_platform_driver(&cpm_i2c_driver);

}



static void __exit cpm_i2c_exit(void)

{

	of_unregister_platform_driver(&cpm_i2c_driver);

}



module_init(cpm_i2c_init);

module_exit(cpm_i2c_exit);



MODULE_AUTHOR("Jochen Friedrich <jochen@scram.de>");

MODULE_DESCRIPTION("I2C-Bus adapter routines for CPM boards");

MODULE_LICENSE("GPL");