Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 60e9eed0 authored by Gurram Pravalika's avatar Gurram Pravalika Committed by Gurram
Browse files

msm: camera: Port msm-4.14 camera kernel on msm-4.19 kernel 



This snapshot is taken from msm-4.14 branch :
(commit c8980a4 Merge "usb: gadget: f_qdss: Remove channel
from list in free_inst").

Change-Id: I4929c47ded047323fbe3d48cb201dad1dbdf0274
Signed-off-by: default avatarGurram Pravalika <gpravali@codeaurora.org>
parent 4b2a7d4f

drivers/media/platform/msm/Kconfig

+14 −0
Original line number Diff line number Diff line
@@ -10,6 +10,20 @@ menuconfig SPECTRA_CAMERA 
      IFE and postprocessing drivers.



source "drivers/media/platform/msm/vidc_3x/Kconfig"



menuconfig MSMB_CAMERA

     bool "QTI MSM camera and video capture 2.0 support"

     depends on ARCH_QCOM && VIDEO_V4L2 && I2C

     help

       Say Y here to enable selecting the video adapters for

       QTI msm camera and video capture 2.0, enabling this

       adds support for the camera driver stack including sensor, isp

       and postprocessing drivers.



if MSMB_CAMERA

       source "drivers/media/platform/msm/camera_v2/Kconfig"

endif # MSMB_CAMERA



source "drivers/media/platform/msm/cvp/Kconfig"

source "drivers/media/platform/msm/npu/Kconfig"

source "drivers/media/platform/msm/synx/Kconfig"

drivers/media/platform/msm/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -10,3 +10,4 @@ obj-$(CONFIG_MSM_NPU) += npu/ 
obj-$(CONFIG_MSM_GLOBAL_SYNX) += synx/

obj-$(CONFIG_TSPP) += broadcast/

obj-$(CONFIG_DVB_MPQ) += dvb/

obj-$(CONFIG_MSMB_CAMERA) += camera_v2/

drivers/media/platform/msm/camera_v2/Kconfig

0 → 100644
+280 −0
Original line number Diff line number Diff line 
# SPDX-License-Identifier: GPL-2.0-only

config MSM_CAMERA_SENSOR

	    bool "QTI MSM camera sensor support"

	    depends on MSMB_CAMERA

	    select NEW_LEDS

	    select LEDS_CLASS

        help

          This flag enables support for Camera Sensor.

          The sensor driver is capable of providing real time

          data for camera support. The driver support V4L2

          subdev APIs.



config MSM_CPP

        bool "QTI MSM Camera Post Processing Engine support"

        depends on MSMB_CAMERA

        help

          Enable support for Camera Post-processing Engine

          The Post processing engine is capable of scaling

          and cropping image. The driver support V4L2 subdev

          APIs.



config MSM_CCI

        bool "QTI MSM Camera Control Interface support"

        depends on MSMB_CAMERA

        help

          Enable support for Camera Control Interface driver only

          for those platforms that have hardware support. This driver

          is responsible for handling I2C read and write on the I2C

          bus. It is also responsible for synchronization with

          GPIO and data frames.



config MSM_CSI20_HEADER

        bool "QTI MSM CSI 2.0 Header"

        depends on MSMB_CAMERA

        help

          Enable support for CSI drivers to include 2.0

          header. This header has register macros and its

          values and bit mask for register configuration bits

          This config macro is required targets based on 8960,

          8930 and 8064 platforms.



config MSM_CSI22_HEADER

        bool "QTI MSM CSI 2.2 Header"

        depends on MSMB_CAMERA

        help

          Enable support for CSI drivers to include 2.2

          header. This header has register macros and its

          values and bit mask for register configuration bits

          This config macro is required targets based on 8610

          platform.



config MSM_CSI30_HEADER

        bool "QTI MSM CSI 3.0 Header"

        depends on MSMB_CAMERA

        help

          Enable support for CSI drivers to include 3.0

          header. This header has register macros and its

          values and bit mask for register configuration bits

          This config macro is required for targets based on

          8064 platforms.



config MSM_CSI31_HEADER

        bool "QTI MSM CSI 3.1 Header"

        depends on MSMB_CAMERA

        help

          Enable support for CSI drivers to include 3.0

          header. This header has register macros and its

          values and bit mask for register configuration bits

          This config macro is required for targets based on

          APQ8084 platform.



config MSM_CSIPHY

        bool "QTI MSM Camera Serial Interface Physical receiver support"

        depends on MSMB_CAMERA

        help

          Enable support for Camera Serial Interface

          Physical receiver. It deserializes packets and

          supports detection of packet start and stop

          signalling.



config MSM_CSID

        bool "QTI MSM Camera Serial Interface decoder support"

        depends on MSMB_CAMERA

        help

          Enable support for Camera Serial Interface decoder.

          It supports lane merging and decoding of packets

          based on cid which is mapped to a virtual channel

          and datatype.



config MSM_EEPROM

        bool "QTI MSM Camera ROM Interface for Calibration support"

        depends on MSMB_CAMERA

        help

          Enable support for ROM Interface for Calibration

          Provides interface for reading the Claibration data.

          and also provides support for writing data in case of FLASH ROM.

	  Currently supports I2C, CCI and SPI protocol



config MSM_ISP_V1

        bool "QTI MSM Image Signal Processing interface support"

        depends on MSMB_CAMERA

        help

          Enable support for Image Signal Processing interface module.

          This module acts as a crossbar between CSID and VFE. Output

          of any CID of CSID can be routed to of pix or raw

          data interface in VFE.



config MSM_ISPIF

        bool "QTI MSM Image Signal Processing interface support"

        depends on MSMB_CAMERA

        help

          Enable support for Image Signal Processing interface module.

          This module acts as a crossbar between CSID and VFE. Output

          of any CID of CSID can be routed to of pix or raw

          data interface in VFE.



config MSM_ISPIF_V1

        bool "QTI MSM Image Signal Processing interface support"

        depends on MSMB_CAMERA

        help

          Enable support for Image Signal Processing interface module.

          This module acts as a crossbar between CSID and VFE. Output

          of any CID of MSM_CSI22_HEADER can be routed to of pix

          or raw data interface in VFE.



config MSM_ISPIF_V2

        bool "QTI MSM Image Signal Processing interface support"

        depends on MSMB_CAMERA

        help

          Enable support for Image Signal Processing interface module.

          This module acts as a crossbar between CSID and VFE. Output

          of any CID of CSID can be routed to of pix

          or raw data interface in VFE.



config MSM_DUAL_ISP_SYNC

        bool "QTI MSM Image Signal Processing interface support"

        depends on MSMB_CAMERA

        help

          Enable support for Image Signal Processing interface module.

          This module is used to enable the dual isp sync generator that

	  does the synchronization of two VFE's. There will be a single

	  output from the sync generator



config IMX134

	bool "Sensor IMX134 (BAYER 8M)"

	depends on MSMB_CAMERA

	help

		Sony 8 MP Bayer Sensor with auto focus, uses

		4 mipi lanes full resolution @30fps and

		HFR @60fps and @120fps,

		Video HDR support.



config IMX132

	bool "Sensor IMX132 (BAYER 2M)"

	depends on MSMB_CAMERA

	help

		Sony 2 MP Bayer Sensor with auto focus, uses

		2 mipi lanes, preview config = 1920 x 1080 at 30 fps,

		snapshot config = 1920 x 1080 at 30 fps,

		Video HDR support.



config OV9724

	bool "Sensor OV9724 (BAYER 2M)"

	depends on MSMB_CAMERA

	help

		OmniVision 2 MP Bayer Sensor, supports 2 mipi lanes,

		preview and snapshot config at 1280*720 at 30 fps,

		hfr video at 60, 90 and 120 fps. This sensor driver does

		not support auto focus.



config OV5648

	bool "Sensor OV5648 (BAYER 5M)"

	depends on MSMB_CAMERA

	help

		OmniVision 5 MP Bayer Sensor, only use 1 mipi lane,

		preview set to 1296*972 at 30 fps,

		snapshot set to 2592*1944 at 12 fps,

		This sensor driver does not support auto focus.



config GC0339

	bool "Sensor GC0339 (BAYER .3M)"

	depends on MSMB_CAMERA

	help

		gc0339 is a Galaxycore .3 MP Bayer Sensor.

		It supports 1 or 2 mipi lanes.

		Preview and snapshot resolution shall be 640*480 at 30 fps,

		It does not support auto focus.



config OV8825

	bool "OmniVision OV8825 (BAYER 8MP)"

	depends on MSMB_CAMERA

	help

		OmniVision 8 MP Bayer Sensor with auto focus.uses

		2 mipi lanes, preview config = 1632*1224 30 fps,

		snapshot config = 3264 * 2448 at 18 fps.

		2 lanes max fps is 18, 4 lanes max fps is 24.



config OV8865

	bool "OmniVision OV8865 (BAYER 8MP)"

	depends on MSMB_CAMERA

	help

		OmniVision 8 MP Bayer Sensor with auto focus.uses

		4 mipi lanes, preview config = 1632*1224 30 fps,

		snapshot config = 3264 * 2448 at 30 fps.

		Max fps is 30fps at 3264 * 2448, 60fps at 1632 * 1224



config s5k4e1

	bool "Sensor s5k4e1 (BAYER 5MP)"

	depends on MSMB_CAMERA

	help

		Samsung 5 MP Bayer Sensor. It uses 2 mipi lanes,

		supports 720P preview at 30 fps

		and QSXGA snapshot at 15 fps.

		This sensor driver does not support auto focus.



config OV12830

	bool "OmniVision OV12830 (BAYER 12MP)"

	depends on MSMB_CAMERA

	help

		OmniVision 12.8 MP Bayer Sensor with auto focus.uses

		4 mipi lanes, preview config = 2112 * 1500 at 30 fps,

		snapshot config = 4224 * 3000 at 15 fps.

		2 lanes max fps is 18, 4 lanes max fps is 24.



config MSM_V4L2_VIDEO_OVERLAY_DEVICE

	tristate "QTI MSM V4l2 video overlay device"

	help

	  Enables support for the MSM V4L2 video

	  overlay driver. This allows video rendering

	  apps to render overlaid video using Video4Linux2

	  APIs, by using /dev/videoX device



config MSMB_JPEG

	tristate "QTI MSM Jpeg Encoder Engine support"

        depends on MSMB_CAMERA && (ARCH_MSM8974 || ARCH_MSM8226 || ARCH_APQ8084 || ARCH_MSM8916 || ARCH_QCOM)

	help

	  Enable support for Jpeg Encoder/Decoder

	  Engine for 8974.

	  This module serves as the common driver

	  for the JPEG 1.0 encoder and decoder.



config MSM_GEMINI

	tristate "QTI MSM Gemini JPEG engine support"

	depends on MSMB_CAMERA && (ARCH_MSM7X30 || ARCH_MSM8X60 || ARCH_MSM8960)

	help

	  Enables support for the Gemini JPEG encoder

	  Engine for 8x60, 7x30 and 8960.

	  This module serves as the driver

	  for JPEG encoding functionality.



config MSM_FD

	 tristate "QTI MSM FD face detection engine support"

	 depends on MSMB_CAMERA

	 help

	    Enables support for the MSM FD face detection engine

            Engine for 8996, 8998.

            This module serves as the driver for

            detection of face ROI in a luma frame.



config MSM_JPEGDMA

	tristate "QTI MSM Jpeg dma"

        depends on MSMB_CAMERA

        select V4L2_MEM2MEM_DEV

	help

	  Enable support for Jpeg dma engine

          Engine for 8996, 8998.

          This module serves as the driver for

          downscale and data transfer functionality.



config MSM_SEC_CCI_TA_NAME

	string "Name of TA to handle Secure CCI transactions"

	depends on MSM_CCI

	default "seccamdemo64"



config MSM_SEC_CCI_DEBUG

	bool "QTI MSM Secure CCI Relay Debug"

	depends on MSM_CCI

	help

	  Enables simulation of secure camera for Secure CCI Realy

	  debugging.

drivers/media/platform/msm/camera_v2/Makefile

0 → 100644
+25 −0
Original line number Diff line number Diff line 
# SPDX-License-Identifier: GPL-2.0-only

ccflags-y += -Idrivers/media/platform/msm/camera_v2

ccflags-y += -Idrivers/media/platform/msm/camera_v2/sensor

ccflags-y += -Idrivers/media/platform/msm/camera_v2/codecs

ccflags-y += -Idrivers/media/platform/msm/camera_v2/isp

ccflags-y += -Idrivers/media/platform/msm/camera_v2/pproc

ccflags-y += -Idrivers/media/platform/msm/camera_v2/msm_vb2

ccflags-y += -Idrivers/media/platform/msm/camera_v2/camera

ccflags-y += -Idrivers/media/platform/msm/camera_v2/jpeg_10

ccflags-y += -Idrivers/media/platform/msm/camera_v2/jpeg_dma

ccflags-y += -Idrivers/media/platform/msm/camera_v2/fd

ccflags-y += -Idrivers/media/platform/msm/camera_v2/common



obj-$(CONFIG_MSMB_CAMERA) += common/

obj-$(CONFIG_MSMB_CAMERA) += msm.o

obj-$(CONFIG_MSMB_CAMERA) += camera/

obj-$(CONFIG_MSMB_CAMERA) += msm_vb2/

obj-$(CONFIG_MSMB_CAMERA) += sensor/

#obj-$(CONFIG_MSMB_CAMERA) += pproc/

#obj-$(CONFIG_MSMB_CAMERA) += isp/

#obj-$(CONFIG_MSMB_CAMERA) += ispif/

#obj-$(CONFIG_MSMB_JPEG) += jpeg_10/

#obj-$(CONFIG_MSM_JPEGDMA) += jpeg_dma/

#obj-$(CONFIG_MSMB_CAMERA) += msm_buf_mgr/

#obj-$(CONFIG_MSM_FD) += fd/

drivers/media/platform/msm/camera_v2/camera/Makefile

0 → 100644
+4 −0
Original line number Diff line number Diff line 
# SPDX-License-Identifier: GPL-2.0-only

ccflags-y += -Idrivers/media/platform/msm/camera_v2

ccflags-y += -Idrivers/media/platform/msm/camera_v2/msm_vb2

obj-$(CONFIG_MSMB_CAMERA) += camera.o