Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 5fe6a7d8 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Simon Horman
Browse files

arm64: dts: renesas: Extract common Salvator-X/XS board support 



The Renesas Salvator-X and Salvator-XS (Salvator-X 2nd version) boards
are very similar.  To avoid duplication, prepare for the advent of the
latter by extracting the common board parts into its own .dtsi file.

Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 371294fc

arch/arm64/boot/dts/renesas/salvator-common.dtsi

0 → 100644
+629 −0
Original line number Diff line number Diff line 
/*

 * Device Tree Source for common parts of Salvator-X board variants

 *

 * Copyright (C) 2015-2016 Renesas Electronics Corp.

 *

 * This file is licensed under the terms of the GNU General Public License

 * version 2.  This program is licensed "as is" without any warranty of any

 * kind, whether express or implied.

 */



/*

 * SSI-AK4613

 *

 * This command is required when Playback/Capture

 *

 *	amixer set "DVC Out" 100%

 *	amixer set "DVC In" 100%

 *

 * You can use Mute

 *

 *	amixer set "DVC Out Mute" on

 *	amixer set "DVC In Mute" on

 *

 * You can use Volume Ramp

 *

 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"

 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"

 *	amixer set "DVC Out Ramp" on

 *	aplay xxx.wav &

 *	amixer set "DVC Out"  80%  // Volume Down

 *	amixer set "DVC Out" 100%  // Volume Up

 */



#include <dt-bindings/gpio/gpio.h>



/ {

	aliases {

		serial0 = &scif2;

		serial1 = &scif1;

		ethernet0 = &avb;

	};



	chosen {

		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";

		stdout-path = "serial0:115200n8";

	};



	audio_clkout: audio_clkout {

		/*

		 * This is same as <&rcar_sound 0>

		 * but needed to avoid cs2000/rcar_sound probe dead-lock

		 */

		compatible = "fixed-clock";

		#clock-cells = <0>;

		clock-frequency = <11289600>;

	};



	backlight: backlight {

		compatible = "pwm-backlight";

		pwms = <&pwm1 0 50000>;



		brightness-levels = <256 128 64 16 8 4 0>;

		default-brightness-level = <6>;



		enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;

	};



	reg_1p8v: regulator0 {

		compatible = "regulator-fixed";

		regulator-name = "fixed-1.8V";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		regulator-boot-on;

		regulator-always-on;

	};



	reg_3p3v: regulator1 {

		compatible = "regulator-fixed";

		regulator-name = "fixed-3.3V";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-boot-on;

		regulator-always-on;

	};



	rsnd_ak4613: sound {

		compatible = "simple-audio-card";



		simple-audio-card,format = "left_j";

		simple-audio-card,bitclock-master = <&sndcpu>;

		simple-audio-card,frame-master = <&sndcpu>;



		sndcpu: simple-audio-card,cpu {

			sound-dai = <&rcar_sound>;

		};



		sndcodec: simple-audio-card,codec {

			sound-dai = <&ak4613>;

		};

	};



	vbus0_usb2: regulator-vbus0-usb2 {

		compatible = "regulator-fixed";



		regulator-name = "USB20_VBUS0";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;



		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;

		enable-active-high;

	};



	vcc_sdhi0: regulator-vcc-sdhi0 {

		compatible = "regulator-fixed";



		regulator-name = "SDHI0 Vcc";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;



		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;

		enable-active-high;

	};



	vccq_sdhi0: regulator-vccq-sdhi0 {

		compatible = "regulator-gpio";



		regulator-name = "SDHI0 VccQ";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <3300000>;



		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;

		gpios-states = <1>;

		states = <3300000 1

			  1800000 0>;

	};



	vcc_sdhi3: regulator-vcc-sdhi3 {

		compatible = "regulator-fixed";



		regulator-name = "SDHI3 Vcc";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;



		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;

		enable-active-high;

	};



	vccq_sdhi3: regulator-vccq-sdhi3 {

		compatible = "regulator-gpio";



		regulator-name = "SDHI3 VccQ";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <3300000>;



		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;

		gpios-states = <1>;

		states = <3300000 1

			  1800000 0>;

	};



	hdmi0-out {

		compatible = "hdmi-connector";

		label = "HDMI0 OUT";

		type = "a";



		port {

			hdmi0_con: endpoint {

			};

		};

	};



	hdmi1-out {

		compatible = "hdmi-connector";

		label = "HDMI1 OUT";

		type = "a";



		port {

			hdmi1_con: endpoint {

			};

		};

	};



	vga {

		compatible = "vga-connector";



		port {

			vga_in: endpoint {

				remote-endpoint = <&adv7123_out>;

			};

		};

	};



	vga-encoder {

		compatible = "adi,adv7123";



		ports {

			#address-cells = <1>;

			#size-cells = <0>;



			port@0 {

				reg = <0>;

				adv7123_in: endpoint {

					remote-endpoint = <&du_out_rgb>;

				};

			};

			port@1 {

				reg = <1>;

				adv7123_out: endpoint {

					remote-endpoint = <&vga_in>;

				};

			};

		};

	};



	x12_clk: x12 {

		compatible = "fixed-clock";

		#clock-cells = <0>;

		clock-frequency = <24576000>;

	};



	/* External DU dot clocks */

	x21_clk: x21-clock {

		compatible = "fixed-clock";

		#clock-cells = <0>;

		clock-frequency = <33000000>;

	};



	x22_clk: x22-clock {

		compatible = "fixed-clock";

		#clock-cells = <0>;

		clock-frequency = <33000000>;

	};



	x23_clk: x23-clock {

		compatible = "fixed-clock";

		#clock-cells = <0>;

		clock-frequency = <25000000>;

	};

};



&audio_clk_a {

	clock-frequency = <22579200>;

};



&avb {

	pinctrl-0 = <&avb_pins>;

	pinctrl-names = "default";

	renesas,no-ether-link;

	phy-handle = <&phy0>;

	status = "okay";



	phy0: ethernet-phy@0 {

		rxc-skew-ps = <1500>;

		reg = <0>;

		interrupt-parent = <&gpio2>;

		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;

	};

};



&du {

	pinctrl-0 = <&du_pins>;

	pinctrl-names = "default";

	status = "okay";



	ports {

		port@0 {

			endpoint {

				remote-endpoint = <&adv7123_in>;

			};

		};

		port@3 {

			lvds_connector: endpoint {

			};

		};

	};

};



&ehci0 {

	status = "okay";

};



&ehci1 {

	status = "okay";

};



&extalr_clk {

	clock-frequency = <32768>;

};



&hsusb {

	status = "okay";

};



&i2c2 {

	pinctrl-0 = <&i2c2_pins>;

	pinctrl-names = "default";



	status = "okay";



	clock-frequency = <100000>;



	ak4613: codec@10 {

		compatible = "asahi-kasei,ak4613";

		#sound-dai-cells = <0>;

		reg = <0x10>;

		clocks = <&rcar_sound 3>;



		asahi-kasei,in1-single-end;

		asahi-kasei,in2-single-end;

		asahi-kasei,out1-single-end;

		asahi-kasei,out2-single-end;

		asahi-kasei,out3-single-end;

		asahi-kasei,out4-single-end;

		asahi-kasei,out5-single-end;

		asahi-kasei,out6-single-end;

	};



	cs2000: clk_multiplier@4f {

		#clock-cells = <0>;

		compatible = "cirrus,cs2000-cp";

		reg = <0x4f>;

		clocks = <&audio_clkout>, <&x12_clk>;

		clock-names = "clk_in", "ref_clk";



		assigned-clocks = <&cs2000>;

		assigned-clock-rates = <24576000>; /* 1/1 divide */

	};

};



&i2c4 {

	status = "okay";



	csa_vdd: adc@7c {

		compatible = "maxim,max9611";

		reg = <0x7c>;



		shunt-resistor-micro-ohms = <5000>;

	};



	csa_dvfs: adc@7f {

		compatible = "maxim,max9611";

		reg = <0x7f>;



		shunt-resistor-micro-ohms = <5000>;

	};

};



&i2c_dvfs {

	status = "okay";

};



&ohci0 {

	status = "okay";

};



&ohci1 {

	status = "okay";

};



&pcie_bus_clk {

	clock-frequency = <100000000>;

};



&pciec0 {

	status = "okay";

};



&pciec1 {

	status = "okay";

};



&pfc {

	pinctrl-0 = <&scif_clk_pins>;

	pinctrl-names = "default";



	avb_pins: avb {

		mux {

			groups = "avb_link", "avb_phy_int", "avb_mdc",

				 "avb_mii";

			function = "avb";

		};



		pins_mdc {

			groups = "avb_mdc";

			drive-strength = <24>;

		};



		pins_mii_tx {

			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",

			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";

			drive-strength = <12>;

		};

	};



	du_pins: du {

		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";

		function = "du";

	};



	i2c2_pins: i2c2 {

		groups = "i2c2_a";

		function = "i2c2";

	};



	pwm1_pins: pwm1 {

		groups = "pwm1_a";

		function = "pwm1";

	};



	scif1_pins: scif1 {

		groups = "scif1_data_a", "scif1_ctrl";

		function = "scif1";

	};



	scif2_pins: scif2 {

		groups = "scif2_data_a";

		function = "scif2";

	};



	scif_clk_pins: scif_clk {

		groups = "scif_clk_a";

		function = "scif_clk";

	};



	sdhi0_pins: sd0 {

		groups = "sdhi0_data4", "sdhi0_ctrl";

		function = "sdhi0";

		power-source = <3300>;

	};



	sdhi0_pins_uhs: sd0_uhs {

		groups = "sdhi0_data4", "sdhi0_ctrl";

		function = "sdhi0";

		power-source = <1800>;

	};



	sdhi2_pins: sd2 {

		groups = "sdhi2_data8", "sdhi2_ctrl";

		function = "sdhi2";

		power-source = <3300>;

	};



	sdhi2_pins_uhs: sd2_uhs {

		groups = "sdhi2_data8", "sdhi2_ctrl";

		function = "sdhi2";

		power-source = <1800>;

	};



	sdhi3_pins: sd3 {

		groups = "sdhi3_data4", "sdhi3_ctrl";

		function = "sdhi3";

		power-source = <3300>;

	};



	sdhi3_pins_uhs: sd3_uhs {

		groups = "sdhi3_data4", "sdhi3_ctrl";

		function = "sdhi3";

		power-source = <1800>;

	};



	sound_pins: sound {

		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";

		function = "ssi";

	};



	sound_clk_pins: sound_clk {

		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",

			 "audio_clkout_a", "audio_clkout3_a";

		function = "audio_clk";

	};



	usb0_pins: usb0 {

		groups = "usb0";

		function = "usb0";

	};



	usb1_pins: usb1 {

		mux {

			groups = "usb1";

			function = "usb1";

		};



		ovc {

			pins = "GP_6_27";

			bias-pull-up;

		};



		pwen {

			pins = "GP_6_26";

			bias-pull-down;

		};

	};

};



&pwm1 {

	pinctrl-0 = <&pwm1_pins>;

	pinctrl-names = "default";



	status = "okay";

};



&rcar_sound {

	pinctrl-0 = <&sound_pins &sound_clk_pins>;

	pinctrl-names = "default";



	/* Single DAI */

	#sound-dai-cells = <0>;



	/* audio_clkout0/1/2/3 */

	#clock-cells = <1>;

	clock-frequency = <11289600 12288000>;



	status = "okay";



	/* update <audio_clk_b> to <cs2000> */

	clocks = <&cpg CPG_MOD 1005>,

		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,

		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,

		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,

		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,

		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,

		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,

		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,

		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,

		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,

		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,

		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,

		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,

		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,

		 <&audio_clk_a>, <&cs2000>,

		 <&audio_clk_c>,

		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;



	rcar_sound,dai {

		dai0 {

			playback = <&ssi0 &src0 &dvc0>;

			capture  = <&ssi1 &src1 &dvc1>;

		};

	};

};



&scif1 {

	pinctrl-0 = <&scif1_pins>;

	pinctrl-names = "default";



	uart-has-rtscts;

	status = "okay";

};



&scif2 {

	pinctrl-0 = <&scif2_pins>;

	pinctrl-names = "default";



	status = "okay";

};



&scif_clk {

	clock-frequency = <14745600>;

};



&sdhi0 {

	pinctrl-0 = <&sdhi0_pins>;

	pinctrl-1 = <&sdhi0_pins_uhs>;

	pinctrl-names = "default", "state_uhs";



	vmmc-supply = <&vcc_sdhi0>;

	vqmmc-supply = <&vccq_sdhi0>;

	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;

	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;

	bus-width = <4>;

	sd-uhs-sdr50;

	status = "okay";

};



&sdhi2 {

	/* used for on-board 8bit eMMC */

	pinctrl-0 = <&sdhi2_pins>;

	pinctrl-1 = <&sdhi2_pins_uhs>;

	pinctrl-names = "default", "state_uhs";



	vmmc-supply = <&reg_3p3v>;

	vqmmc-supply = <&reg_1p8v>;

	bus-width = <8>;

	mmc-hs200-1_8v;

	non-removable;

	status = "okay";

};



&sdhi3 {

	pinctrl-0 = <&sdhi3_pins>;

	pinctrl-1 = <&sdhi3_pins_uhs>;

	pinctrl-names = "default", "state_uhs";



	vmmc-supply = <&vcc_sdhi3>;

	vqmmc-supply = <&vccq_sdhi3>;

	cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;

	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;

	bus-width = <4>;

	sd-uhs-sdr50;

	status = "okay";

};



&ssi1 {

	shared-pin;

};



&usb2_phy0 {

	pinctrl-0 = <&usb0_pins>;

	pinctrl-names = "default";



	vbus-supply = <&vbus0_usb2>;

	status = "okay";

};



&usb2_phy1 {

	pinctrl-0 = <&usb1_pins>;

	pinctrl-names = "default";



	status = "okay";

};



&wdt0 {

	timeout-sec = <60>;

	status = "okay";

};



&xhci0 {

	status = "okay";

};

arch/arm64/boot/dts/renesas/salvator-x.dtsi

+1 −615
Original line number Diff line number Diff line
@@ -8,335 +8,18 @@ 
 * kind, whether express or implied.

 */



/*

 * SSI-AK4613

 *

 * This command is required when Playback/Capture

 *

 *	amixer set "DVC Out" 100%

 *	amixer set "DVC In" 100%

 *

 * You can use Mute

 *

 *	amixer set "DVC Out Mute" on

 *	amixer set "DVC In Mute" on

 *

 * You can use Volume Ramp

 *

 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"

 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"

 *	amixer set "DVC Out Ramp" on

 *	aplay xxx.wav &

 *	amixer set "DVC Out"  80%  // Volume Down

 *	amixer set "DVC Out" 100%  // Volume Up

 */



#include <dt-bindings/gpio/gpio.h>

#include "salvator-common.dtsi"



/ {

	model = "Renesas Salvator-X board";

	compatible = "renesas,salvator-x";



	aliases {

		serial0 = &scif2;

		serial1 = &scif1;

		ethernet0 = &avb;

	};



	chosen {

		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";

		stdout-path = "serial0:115200n8";

	};



	audio_clkout: audio_clkout {

		/*

		 * This is same as <&rcar_sound 0>

		 * but needed to avoid cs2000/rcar_sound probe dead-lock

		 */

		compatible = "fixed-clock";

		#clock-cells = <0>;

		clock-frequency = <11289600>;

	};



	backlight: backlight {

		compatible = "pwm-backlight";

		pwms = <&pwm1 0 50000>;



		brightness-levels = <256 128 64 16 8 4 0>;

		default-brightness-level = <6>;



		enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;

	};



	reg_1p8v: regulator0 {

		compatible = "regulator-fixed";

		regulator-name = "fixed-1.8V";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		regulator-boot-on;

		regulator-always-on;

	};



	reg_3p3v: regulator1 {

		compatible = "regulator-fixed";

		regulator-name = "fixed-3.3V";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-boot-on;

		regulator-always-on;

	};



	rsnd_ak4613: sound {

		compatible = "simple-audio-card";



		simple-audio-card,format = "left_j";

		simple-audio-card,bitclock-master = <&sndcpu>;

		simple-audio-card,frame-master = <&sndcpu>;



		sndcpu: simple-audio-card,cpu {

			sound-dai = <&rcar_sound>;

		};



		sndcodec: simple-audio-card,codec {

			sound-dai = <&ak4613>;

		};

	};



	vbus0_usb2: regulator-vbus0-usb2 {

		compatible = "regulator-fixed";



		regulator-name = "USB20_VBUS0";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;



		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;

		enable-active-high;

	};



	vcc_sdhi0: regulator-vcc-sdhi0 {

		compatible = "regulator-fixed";



		regulator-name = "SDHI0 Vcc";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;



		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;

		enable-active-high;

	};



	vccq_sdhi0: regulator-vccq-sdhi0 {

		compatible = "regulator-gpio";



		regulator-name = "SDHI0 VccQ";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <3300000>;



		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;

		gpios-states = <1>;

		states = <3300000 1

			  1800000 0>;

	};



	vcc_sdhi3: regulator-vcc-sdhi3 {

		compatible = "regulator-fixed";



		regulator-name = "SDHI3 Vcc";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;



		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;

		enable-active-high;

	};



	vccq_sdhi3: regulator-vccq-sdhi3 {

		compatible = "regulator-gpio";



		regulator-name = "SDHI3 VccQ";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <3300000>;



		gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;

		gpios-states = <1>;

		states = <3300000 1

			  1800000 0>;

	};



	hdmi0-out {

		compatible = "hdmi-connector";

		label = "HDMI0 OUT";

		type = "a";



		port {

			hdmi0_con: endpoint {

			};

		};

	};



	hdmi1-out {

		compatible = "hdmi-connector";

		label = "HDMI1 OUT";

		type = "a";



		port {

			hdmi1_con: endpoint {

			};

		};

	};



	vga {

		compatible = "vga-connector";



		port {

			vga_in: endpoint {

				remote-endpoint = <&adv7123_out>;

			};

		};

	};



	vga-encoder {

		compatible = "adi,adv7123";



		ports {

			#address-cells = <1>;

			#size-cells = <0>;



			port@0 {

				reg = <0>;

				adv7123_in: endpoint {

					remote-endpoint = <&du_out_rgb>;

				};

			};

			port@1 {

				reg = <1>;

				adv7123_out: endpoint {

					remote-endpoint = <&vga_in>;

				};

			};

		};

	};



	x12_clk: x12 {

		compatible = "fixed-clock";

		#clock-cells = <0>;

		clock-frequency = <24576000>;

	};



	/* External DU dot clocks */

	x21_clk: x21-clock {

		compatible = "fixed-clock";

		#clock-cells = <0>;

		clock-frequency = <33000000>;

	};



	x22_clk: x22-clock {

		compatible = "fixed-clock";

		#clock-cells = <0>;

		clock-frequency = <33000000>;

	};



	x23_clk: x23-clock {

		compatible = "fixed-clock";

		#clock-cells = <0>;

		clock-frequency = <25000000>;

	};

};



&audio_clk_a {

	clock-frequency = <22579200>;

};



&avb {

	pinctrl-0 = <&avb_pins>;

	pinctrl-names = "default";

	renesas,no-ether-link;

	phy-handle = <&phy0>;

	status = "okay";



	phy0: ethernet-phy@0 {

		rxc-skew-ps = <1500>;

		reg = <0>;

		interrupt-parent = <&gpio2>;

		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;

	};

};



&du {

	pinctrl-0 = <&du_pins>;

	pinctrl-names = "default";

	status = "okay";



	ports {

		port@0 {

			endpoint {

				remote-endpoint = <&adv7123_in>;

			};

		};

		port@3 {

			lvds_connector: endpoint {

			};

		};

	};

};



&ehci0 {

	status = "okay";

};



&ehci1 {

	status = "okay";

};



&extal_clk {

	clock-frequency = <16666666>;

};



&extalr_clk {

	clock-frequency = <32768>;

};



&hsusb {

	status = "okay";

};



&i2c2 {

	pinctrl-0 = <&i2c2_pins>;

	pinctrl-names = "default";



	status = "okay";



	clock-frequency = <100000>;



	ak4613: codec@10 {

		compatible = "asahi-kasei,ak4613";

		#sound-dai-cells = <0>;

		reg = <0x10>;

		clocks = <&rcar_sound 3>;



		asahi-kasei,in1-single-end;

		asahi-kasei,in2-single-end;

		asahi-kasei,out1-single-end;

		asahi-kasei,out2-single-end;

		asahi-kasei,out3-single-end;

		asahi-kasei,out4-single-end;

		asahi-kasei,out5-single-end;

		asahi-kasei,out6-single-end;

	};



	cs2000: clk_multiplier@4f {

		#clock-cells = <0>;

		compatible = "cirrus,cs2000-cp";

		reg = <0x4f>;

		clocks = <&audio_clkout>, <&x12_clk>;

		clock-names = "clk_in", "ref_clk";



		assigned-clocks = <&cs2000>;

		assigned-clock-rates = <24576000>; /* 1/1 divide */

	};

};



&i2c4 {

	status = "okay";



	versaclock5: clock-generator@6a {

		compatible = "idt,5p49v5923";

		reg = <0x6a>;
@@ -344,301 +27,4 @@ 
		clocks = <&x23_clk>;

		clock-names = "xin";

	};



	csa_vdd: adc@7c {

		compatible = "maxim,max9611";

		reg = <0x7c>;



		shunt-resistor-micro-ohms = <5000>;

	};



	csa_dvfs: adc@7f {

		compatible = "maxim,max9611";

		reg = <0x7f>;



		shunt-resistor-micro-ohms = <5000>;

	};

};



&i2c_dvfs {

	status = "okay";

};



&ohci0 {

	status = "okay";

};



&ohci1 {

	status = "okay";

};



&pcie_bus_clk {

	clock-frequency = <100000000>;

};



&pciec0 {

	status = "okay";

};



&pciec1 {

	status = "okay";

};



&pfc {

	pinctrl-0 = <&scif_clk_pins>;

	pinctrl-names = "default";



	avb_pins: avb {

		mux {

			groups = "avb_link", "avb_phy_int", "avb_mdc",

				 "avb_mii";

			function = "avb";

		};



		pins_mdc {

			groups = "avb_mdc";

			drive-strength = <24>;

		};



		pins_mii_tx {

			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",

			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";

			drive-strength = <12>;

		};

	};



	du_pins: du {

		groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";

		function = "du";

	};



	i2c2_pins: i2c2 {

		groups = "i2c2_a";

		function = "i2c2";

	};



	pwm1_pins: pwm1 {

		groups = "pwm1_a";

		function = "pwm1";

	};



	scif1_pins: scif1 {

		groups = "scif1_data_a", "scif1_ctrl";

		function = "scif1";

	};



	scif2_pins: scif2 {

		groups = "scif2_data_a";

		function = "scif2";

	};



	scif_clk_pins: scif_clk {

		groups = "scif_clk_a";

		function = "scif_clk";

	};



	sdhi0_pins: sd0 {

		groups = "sdhi0_data4", "sdhi0_ctrl";

		function = "sdhi0";

		power-source = <3300>;

	};



	sdhi0_pins_uhs: sd0_uhs {

		groups = "sdhi0_data4", "sdhi0_ctrl";

		function = "sdhi0";

		power-source = <1800>;

	};



	sdhi2_pins: sd2 {

		groups = "sdhi2_data8", "sdhi2_ctrl";

		function = "sdhi2";

		power-source = <3300>;

	};



	sdhi2_pins_uhs: sd2_uhs {

		groups = "sdhi2_data8", "sdhi2_ctrl";

		function = "sdhi2";

		power-source = <1800>;

	};



	sdhi3_pins: sd3 {

		groups = "sdhi3_data4", "sdhi3_ctrl";

		function = "sdhi3";

		power-source = <3300>;

	};



	sdhi3_pins_uhs: sd3_uhs {

		groups = "sdhi3_data4", "sdhi3_ctrl";

		function = "sdhi3";

		power-source = <1800>;

	};



	sound_pins: sound {

		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";

		function = "ssi";

	};



	sound_clk_pins: sound_clk {

		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",

			 "audio_clkout_a", "audio_clkout3_a";

		function = "audio_clk";

	};



	usb0_pins: usb0 {

		groups = "usb0";

		function = "usb0";

	};



	usb1_pins: usb1 {

		mux {

			groups = "usb1";

			function = "usb1";

		};



		ovc {

			pins = "GP_6_27";

			bias-pull-up;

		};



		pwen {

			pins = "GP_6_26";

			bias-pull-down;

		};

	};

};



&pwm1 {

	pinctrl-0 = <&pwm1_pins>;

	pinctrl-names = "default";



	status = "okay";

};



&rcar_sound {

	pinctrl-0 = <&sound_pins &sound_clk_pins>;

	pinctrl-names = "default";



	/* Single DAI */

	#sound-dai-cells = <0>;



	/* audio_clkout0/1/2/3 */

	#clock-cells = <1>;

	clock-frequency = <11289600 12288000>;



	status = "okay";



	/* update <audio_clk_b> to <cs2000> */

	clocks = <&cpg CPG_MOD 1005>,

		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,

		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,

		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,

		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,

		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,

		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,

		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,

		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,

		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,

		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,

		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,

		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,

		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,

		 <&audio_clk_a>, <&cs2000>,

		 <&audio_clk_c>,

		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;



	rcar_sound,dai {

		dai0 {

			playback = <&ssi0 &src0 &dvc0>;

			capture  = <&ssi1 &src1 &dvc1>;

		};

	};

};



&scif1 {

	pinctrl-0 = <&scif1_pins>;

	pinctrl-names = "default";



	uart-has-rtscts;

	status = "okay";

};



&scif2 {

	pinctrl-0 = <&scif2_pins>;

	pinctrl-names = "default";



	status = "okay";

};



&scif_clk {

	clock-frequency = <14745600>;

};



&sdhi0 {

	pinctrl-0 = <&sdhi0_pins>;

	pinctrl-1 = <&sdhi0_pins_uhs>;

	pinctrl-names = "default", "state_uhs";



	vmmc-supply = <&vcc_sdhi0>;

	vqmmc-supply = <&vccq_sdhi0>;

	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;

	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;

	bus-width = <4>;

	sd-uhs-sdr50;

	status = "okay";

};



&sdhi2 {

	/* used for on-board 8bit eMMC */

	pinctrl-0 = <&sdhi2_pins>;

	pinctrl-1 = <&sdhi2_pins_uhs>;

	pinctrl-names = "default", "state_uhs";



	vmmc-supply = <&reg_3p3v>;

	vqmmc-supply = <&reg_1p8v>;

	bus-width = <8>;

	mmc-hs200-1_8v;

	non-removable;

	status = "okay";

};



&sdhi3 {

	pinctrl-0 = <&sdhi3_pins>;

	pinctrl-1 = <&sdhi3_pins_uhs>;

	pinctrl-names = "default", "state_uhs";



	vmmc-supply = <&vcc_sdhi3>;

	vqmmc-supply = <&vccq_sdhi3>;

	cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;

	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;

	bus-width = <4>;

	sd-uhs-sdr50;

	status = "okay";

};



&ssi1 {

	shared-pin;

};



&usb2_phy0 {

	pinctrl-0 = <&usb0_pins>;

	pinctrl-names = "default";



	vbus-supply = <&vbus0_usb2>;

	status = "okay";

};



&usb2_phy1 {

	pinctrl-0 = <&usb1_pins>;

	pinctrl-names = "default";



	status = "okay";

};



&wdt0 {

	timeout-sec = <60>;

	status = "okay";

};



&xhci0 {

	status = "okay";

};