Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 5fae8b86 authored by Mika Westerberg's avatar Mika Westerberg Committed by Linus Walleij
Browse files

pinctrl: Move Intel Baytrail pinctrl driver under intel directory 



We are going to have more pinctrl drivers for Intel hardware so separate
all our pin controller drivers to own directory.

Signed-off-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent cfb24f6e

drivers/pinctrl/Kconfig

+1 −12
Original line number Diff line number Diff line
@@ -67,18 +67,6 @@ config PINCTRL_AT91 
	help

	  Say Y here to enable the at91 pinctrl driver



config PINCTRL_BAYTRAIL

	bool "Intel Baytrail GPIO pin control"

	depends on GPIOLIB && ACPI && X86

	select GPIOLIB_IRQCHIP

	help

	  driver for memory mapped GPIO functionality on Intel Baytrail

	  platforms. Supports 3 banks with 102, 28 and 44 gpios.

	  Most pins are usually muxed to some other functionality by firmware,

	  so only a small amount is available for gpio use.



	  Requires ACPI device enumeration code to set up a platform device.



config PINCTRL_BCM2835

	bool

	select PINMUX
@@ -205,6 +193,7 @@ config PINCTRL_PALMAS 


source "drivers/pinctrl/berlin/Kconfig"

source "drivers/pinctrl/freescale/Kconfig"

source "drivers/pinctrl/intel/Kconfig"

source "drivers/pinctrl/mvebu/Kconfig"

source "drivers/pinctrl/nomadik/Kconfig"

source "drivers/pinctrl/qcom/Kconfig"

drivers/pinctrl/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -15,7 +15,6 @@ obj-$(CONFIG_PINCTRL_BF54x) += pinctrl-adi2-bf54x.o 
obj-$(CONFIG_PINCTRL_BF60x)	+= pinctrl-adi2-bf60x.o

obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o

obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o

obj-$(CONFIG_PINCTRL_BAYTRAIL)	+= pinctrl-baytrail.o

obj-$(CONFIG_PINCTRL_BCM281XX)	+= pinctrl-bcm281xx.o

obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o

obj-$(CONFIG_PINCTRL_PALMAS)	+= pinctrl-palmas.o
@@ -39,6 +38,7 @@ obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o 


obj-$(CONFIG_ARCH_BERLIN)	+= berlin/

obj-y				+= freescale/

obj-$(CONFIG_X86)		+= intel/

obj-$(CONFIG_PLAT_ORION)        += mvebu/

obj-y				+= nomadik/

obj-$(CONFIG_ARCH_QCOM)		+= qcom/

drivers/pinctrl/intel/Kconfig

0 → 100644
+15 −0
Original line number Diff line number Diff line 
#

# Intel pin control drivers

#



config PINCTRL_BAYTRAIL

	bool "Intel Baytrail GPIO pin control"

	depends on GPIOLIB && ACPI

	select GPIOLIB_IRQCHIP

	help

	  driver for memory mapped GPIO functionality on Intel Baytrail

	  platforms. Supports 3 banks with 102, 28 and 44 gpios.

	  Most pins are usually muxed to some other functionality by firmware,

	  so only a small amount is available for gpio use.



	  Requires ACPI device enumeration code to set up a platform device.

drivers/pinctrl/intel/Makefile

0 → 100644
+3 −0
Original line number Diff line number Diff line 
# Intel pin control drivers



obj-$(CONFIG_PINCTRL_BAYTRAIL)		+= pinctrl-baytrail.o