Loading Documentation/devicetree/bindings/sound/ti,tas5086.txt 0 → 100644 +32 −0 Original line number Diff line number Diff line Texas Instruments TAS5086 6-channel PWM Processor Required properties: - compatible: Should contain "ti,tas5086". - reg: The i2c address. Should contain <0x1b>. Optional properties: - reset-gpio: A GPIO spec to define which pin is connected to the chip's !RESET pin. If specified, the driver will assert a hardware reset at probe time. - ti,charge-period: This property should contain the time in microseconds that closely matches the external single-ended split-capacitor charge period. The hardware chip waits for this period of time before starting the PWM signals. This helps reduce pops and clicks. When not specified, the hardware default of 1300ms is retained. Examples: i2c_bus { tas5086@1b { compatible = "ti,tas5086"; reg = <0x1b>; reset-gpio = <&gpio 23 0>; ti,charge-period = <156000>; }; }; include/sound/tas5086.h 0 → 100644 +7 −0 Original line number Diff line number Diff line #ifndef _SND_SOC_CODEC_TAS5086_H_ #define _SND_SOC_CODEC_TAS5086_H_ #define TAS5086_CLK_IDX_MCLK 0 #define TAS5086_CLK_IDX_SCLK 1 #endif /* _SND_SOC_CODEC_TAS5086_H_ */ sound/soc/codecs/Kconfig +4 −0 Original line number Diff line number Diff line Loading @@ -64,6 +64,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_STA32X if I2C select SND_SOC_STA529 if I2C select SND_SOC_STAC9766 if SND_SOC_AC97_BUS select SND_SOC_TAS5086 if I2C select SND_SOC_TLV320AIC23 if I2C select SND_SOC_TLV320AIC26 if SPI_MASTER select SND_SOC_TLV320AIC32X4 if I2C Loading Loading @@ -324,6 +325,9 @@ config SND_SOC_STA529 config SND_SOC_STAC9766 tristate config SND_SOC_TAS5086 tristate config SND_SOC_TLV320AIC23 tristate Loading sound/soc/codecs/Makefile +2 −0 Original line number Diff line number Diff line Loading @@ -56,6 +56,7 @@ snd-soc-ssm2602-objs := ssm2602.o snd-soc-sta32x-objs := sta32x.o snd-soc-sta529-objs := sta529.o snd-soc-stac9766-objs := stac9766.o snd-soc-tas5086-objs := tas5086.o snd-soc-tlv320aic23-objs := tlv320aic23.o snd-soc-tlv320aic26-objs := tlv320aic26.o snd-soc-tlv320aic3x-objs := tlv320aic3x.o Loading Loading @@ -179,6 +180,7 @@ obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o obj-$(CONFIG_SND_SOC_STA32X) += snd-soc-sta32x.o obj-$(CONFIG_SND_SOC_STA529) += snd-soc-sta529.o obj-$(CONFIG_SND_SOC_STAC9766) += snd-soc-stac9766.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o obj-$(CONFIG_SND_SOC_TLV320AIC26) += snd-soc-tlv320aic26.o obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o Loading sound/soc/codecs/tas5086.c 0 → 100644 +591 −0 Original line number Diff line number Diff line /* * TAS5086 ASoC codec driver * * Copyright (c) 2013 Daniel Mack <zonque@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * TODO: * - implement DAPM and input muxing * - implement modulation limit * - implement non-default PWM start * * Note that this chip has a very unusual register layout, specifically * because the registers are of unequal size, and multi-byte registers * require bulk writes to take effect. Regmap does not support that kind * of devices. * * Currently, the driver does not touch any of the registers >= 0x20, so * it doesn't matter because the entire map can be accessed as 8-bit * array. In case more features will be added in the future * that require access to higher registers, the entire regmap H/W I/O * routines have to be open-coded. */ #include <linux/module.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/regmap.h> #include <linux/spi/spi.h> #include <linux/of_device.h> #include <linux/of_gpio.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/tlv.h> #include <sound/tas5086.h> #define TAS5086_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ SNDRV_PCM_FMTBIT_S20_3LE | \ SNDRV_PCM_FMTBIT_S24_3LE) #define TAS5086_PCM_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \ SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ SNDRV_PCM_RATE_192000) /* * TAS5086 registers */ #define TAS5086_CLOCK_CONTROL 0x00 /* Clock control register */ #define TAS5086_CLOCK_RATE(val) (val << 5) #define TAS5086_CLOCK_RATE_MASK (0x7 << 5) #define TAS5086_CLOCK_RATIO(val) (val << 2) #define TAS5086_CLOCK_RATIO_MASK (0x7 << 2) #define TAS5086_CLOCK_SCLK_RATIO_48 (1 << 1) #define TAS5086_CLOCK_VALID (1 << 0) #define TAS5086_DEEMPH_MASK 0x03 #define TAS5086_SOFT_MUTE_ALL 0x3f #define TAS5086_DEV_ID 0x01 /* Device ID register */ #define TAS5086_ERROR_STATUS 0x02 /* Error status register */ #define TAS5086_SYS_CONTROL_1 0x03 /* System control register 1 */ #define TAS5086_SERIAL_DATA_IF 0x04 /* Serial data interface register */ #define TAS5086_SYS_CONTROL_2 0x05 /* System control register 2 */ #define TAS5086_SOFT_MUTE 0x06 /* Soft mute register */ #define TAS5086_MASTER_VOL 0x07 /* Master volume */ #define TAS5086_CHANNEL_VOL(X) (0x08 + (X)) /* Channel 1-6 volume */ #define TAS5086_VOLUME_CONTROL 0x09 /* Volume control register */ #define TAS5086_MOD_LIMIT 0x10 /* Modulation limit register */ #define TAS5086_PWM_START 0x18 /* PWM start register */ #define TAS5086_SURROUND 0x19 /* Surround register */ #define TAS5086_SPLIT_CAP_CHARGE 0x1a /* Split cap charge period register */ #define TAS5086_OSC_TRIM 0x1b /* Oscillator trim register */ #define TAS5086_BKNDERR 0x1c /* * Default TAS5086 power-up configuration */ static const struct reg_default tas5086_reg_defaults[] = { { 0x00, 0x6c }, { 0x01, 0x03 }, { 0x02, 0x00 }, { 0x03, 0xa0 }, { 0x04, 0x05 }, { 0x05, 0x60 }, { 0x06, 0x00 }, { 0x07, 0xff }, { 0x08, 0x30 }, { 0x09, 0x30 }, { 0x0a, 0x30 }, { 0x0b, 0x30 }, { 0x0c, 0x30 }, { 0x0d, 0x30 }, { 0x0e, 0xb1 }, { 0x0f, 0x00 }, { 0x10, 0x02 }, { 0x11, 0x00 }, { 0x12, 0x00 }, { 0x13, 0x00 }, { 0x14, 0x00 }, { 0x15, 0x00 }, { 0x16, 0x00 }, { 0x17, 0x00 }, { 0x18, 0x3f }, { 0x19, 0x00 }, { 0x1a, 0x18 }, { 0x1b, 0x82 }, { 0x1c, 0x05 }, }; static bool tas5086_accessible_reg(struct device *dev, unsigned int reg) { return !((reg == 0x0f) || (reg >= 0x11 && reg <= 0x17)); } static bool tas5086_volatile_reg(struct device *dev, unsigned int reg) { switch (reg) { case TAS5086_DEV_ID: case TAS5086_ERROR_STATUS: return true; } return false; } static bool tas5086_writeable_reg(struct device *dev, unsigned int reg) { return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID); } struct tas5086_private { struct regmap *regmap; unsigned int mclk, sclk; unsigned int format; bool deemph; /* Current sample rate for de-emphasis control */ int rate; /* GPIO driving Reset pin, if any */ int gpio_nreset; }; static int tas5086_deemph[] = { 0, 32000, 44100, 48000 }; static int tas5086_set_deemph(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); int i, val = 0; if (priv->deemph) for (i = 0; i < ARRAY_SIZE(tas5086_deemph); i++) if (tas5086_deemph[i] == priv->rate) val = i; return regmap_update_bits(priv->regmap, TAS5086_SYS_CONTROL_1, TAS5086_DEEMPH_MASK, val); } static int tas5086_get_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); ucontrol->value.enumerated.item[0] = priv->deemph; return 0; } static int tas5086_put_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); priv->deemph = ucontrol->value.enumerated.item[0]; return tas5086_set_deemph(codec); } static int tas5086_set_dai_sysclk(struct snd_soc_dai *codec_dai, int clk_id, unsigned int freq, int dir) { struct snd_soc_codec *codec = codec_dai->codec; struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); switch (clk_id) { case TAS5086_CLK_IDX_MCLK: priv->mclk = freq; break; case TAS5086_CLK_IDX_SCLK: priv->sclk = freq; break; } return 0; } static int tas5086_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int format) { struct snd_soc_codec *codec = codec_dai->codec; struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); /* The TAS5086 can only be slave to all clocks */ if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) { dev_err(codec->dev, "Invalid clocking mode\n"); return -EINVAL; } /* we need to refer to the data format from hw_params() */ priv->format = format; return 0; } static const int tas5086_sample_rates[] = { 32000, 38000, 44100, 48000, 88200, 96000, 176400, 192000 }; static const int tas5086_ratios[] = { 64, 128, 192, 256, 384, 512 }; static int index_in_array(const int *array, int len, int needle) { int i; for (i = 0; i < len; i++) if (array[i] == needle) return i; return -ENOENT; } static int tas5086_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { struct snd_soc_codec *codec = dai->codec; struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); int val; int ret; priv->rate = params_rate(params); /* Look up the sample rate and refer to the offset in the list */ val = index_in_array(tas5086_sample_rates, ARRAY_SIZE(tas5086_sample_rates), priv->rate); if (val < 0) { dev_err(codec->dev, "Invalid sample rate\n"); return -EINVAL; } ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, TAS5086_CLOCK_RATE_MASK, TAS5086_CLOCK_RATE(val)); if (ret < 0) return ret; /* MCLK / Fs ratio */ val = index_in_array(tas5086_ratios, ARRAY_SIZE(tas5086_ratios), priv->mclk / priv->rate); if (val < 0) { dev_err(codec->dev, "Inavlid MCLK / Fs ratio\n"); return -EINVAL; } ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, TAS5086_CLOCK_RATIO_MASK, TAS5086_CLOCK_RATIO(val)); if (ret < 0) return ret; ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, TAS5086_CLOCK_SCLK_RATIO_48, (priv->sclk == 48 * priv->rate) ? TAS5086_CLOCK_SCLK_RATIO_48 : 0); if (ret < 0) return ret; /* * The chip has a very unituitive register mapping and muxes information * about data format and sample depth into the same register, but not on * a logical bit-boundary. Hence, we have to refer to the format passed * in the set_dai_fmt() callback and set up everything from here. * * First, determine the 'base' value, using the format ... */ switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_RIGHT_J: val = 0x00; break; case SND_SOC_DAIFMT_I2S: val = 0x03; break; case SND_SOC_DAIFMT_LEFT_J: val = 0x06; break; default: dev_err(codec->dev, "Invalid DAI format\n"); return -EINVAL; } /* ... then add the offset for the sample bit depth. */ switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: val += 0; break; case SNDRV_PCM_FORMAT_S20_3LE: val += 1; break; case SNDRV_PCM_FORMAT_S24_3LE: val += 2; break; default: dev_err(codec->dev, "Invalid bit width\n"); return -EINVAL; }; ret = regmap_write(priv->regmap, TAS5086_SERIAL_DATA_IF, val); if (ret < 0) return ret; /* clock is considered valid now */ ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, TAS5086_CLOCK_VALID, TAS5086_CLOCK_VALID); if (ret < 0) return ret; return tas5086_set_deemph(codec); } static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream) { struct snd_soc_codec *codec = dai->codec; struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); unsigned int val = 0; if (mute) val = TAS5086_SOFT_MUTE_ALL; return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val); } /* TAS5086 controls */ static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1); static const struct snd_kcontrol_new tas5086_controls[] = { SOC_SINGLE_TLV("Master Playback Volume", TAS5086_MASTER_VOL, 0, 0xff, 1, tas5086_dac_tlv), SOC_DOUBLE_R_TLV("Channel 1/2 Playback Volume", TAS5086_CHANNEL_VOL(0), TAS5086_CHANNEL_VOL(1), 0, 0xff, 1, tas5086_dac_tlv), SOC_DOUBLE_R_TLV("Channel 3/4 Playback Volume", TAS5086_CHANNEL_VOL(2), TAS5086_CHANNEL_VOL(3), 0, 0xff, 1, tas5086_dac_tlv), SOC_DOUBLE_R_TLV("Channel 5/6 Playback Volume", TAS5086_CHANNEL_VOL(4), TAS5086_CHANNEL_VOL(5), 0, 0xff, 1, tas5086_dac_tlv), SOC_SINGLE_BOOL_EXT("De-emphasis Switch", 0, tas5086_get_deemph, tas5086_put_deemph), }; static const struct snd_soc_dai_ops tas5086_dai_ops = { .hw_params = tas5086_hw_params, .set_sysclk = tas5086_set_dai_sysclk, .set_fmt = tas5086_set_dai_fmt, .mute_stream = tas5086_mute_stream, }; static struct snd_soc_dai_driver tas5086_dai = { .name = "tas5086-hifi", .playback = { .stream_name = "Playback", .channels_min = 2, .channels_max = 6, .rates = TAS5086_PCM_RATES, .formats = TAS5086_PCM_FORMATS, }, .ops = &tas5086_dai_ops, }; #ifdef CONFIG_PM static int tas5086_soc_resume(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); /* Restore codec state */ return regcache_sync(priv->regmap); } #else #define tas5086_soc_resume NULL #endif /* CONFIG_PM */ #ifdef CONFIG_OF static const struct of_device_id tas5086_dt_ids[] = { { .compatible = "ti,tas5086", }, { } }; MODULE_DEVICE_TABLE(of, tas5086_dt_ids); #endif /* charge period values in microseconds */ static const int tas5086_charge_period[] = { 13000, 16900, 23400, 31200, 41600, 54600, 72800, 96200, 130000, 156000, 234000, 312000, 416000, 546000, 728000, 962000, 1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000, }; static int tas5086_probe(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); int charge_period = 1300000; /* hardware default is 1300 ms */ int i, ret; if (of_match_device(of_match_ptr(tas5086_dt_ids), codec->dev)) { struct device_node *of_node = codec->dev->of_node; of_property_read_u32(of_node, "ti,charge-period", &charge_period); } /* lookup and set split-capacitor charge period */ if (charge_period == 0) { regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0); } else { i = index_in_array(tas5086_charge_period, ARRAY_SIZE(tas5086_charge_period), charge_period); if (i >= 0) regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, i + 0x08); else dev_warn(codec->dev, "Invalid split-cap charge period of %d ns.\n", charge_period); } /* enable factory trim */ ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00); if (ret < 0) return ret; /* start all channels */ ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20); if (ret < 0) return ret; /* set master volume to 0 dB */ ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30); if (ret < 0) return ret; /* mute all channels for now */ ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE, TAS5086_SOFT_MUTE_ALL); if (ret < 0) return ret; return 0; } static int tas5086_remove(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); if (gpio_is_valid(priv->gpio_nreset)) /* Set codec to the reset state */ gpio_set_value(priv->gpio_nreset, 0); return 0; }; static struct snd_soc_codec_driver soc_codec_dev_tas5086 = { .probe = tas5086_probe, .remove = tas5086_remove, .resume = tas5086_soc_resume, .controls = tas5086_controls, .num_controls = ARRAY_SIZE(tas5086_controls), }; static const struct i2c_device_id tas5086_i2c_id[] = { { "tas5086", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id); static const struct regmap_config tas5086_regmap = { .reg_bits = 8, .val_bits = 8, .max_register = ARRAY_SIZE(tas5086_reg_defaults), .reg_defaults = tas5086_reg_defaults, .num_reg_defaults = ARRAY_SIZE(tas5086_reg_defaults), .cache_type = REGCACHE_RBTREE, .volatile_reg = tas5086_volatile_reg, .writeable_reg = tas5086_writeable_reg, .readable_reg = tas5086_accessible_reg, }; static int tas5086_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct tas5086_private *priv; struct device *dev = &i2c->dev; int gpio_nreset = -EINVAL; int i, ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->regmap = devm_regmap_init_i2c(i2c, &tas5086_regmap); if (IS_ERR(priv->regmap)) { ret = PTR_ERR(priv->regmap); dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret); return ret; } i2c_set_clientdata(i2c, priv); if (of_match_device(of_match_ptr(tas5086_dt_ids), dev)) { struct device_node *of_node = dev->of_node; gpio_nreset = of_get_named_gpio(of_node, "reset-gpio", 0); } if (gpio_is_valid(gpio_nreset)) if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset")) gpio_nreset = -EINVAL; if (gpio_is_valid(gpio_nreset)) { /* Reset codec - minimum assertion time is 400ns */ gpio_direction_output(gpio_nreset, 0); udelay(1); gpio_set_value(gpio_nreset, 1); /* Codec needs ~15ms to wake up */ msleep(15); } priv->gpio_nreset = gpio_nreset; /* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */ ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i); if (ret < 0) return ret; if (i != 0x3) { dev_err(dev, "Failed to identify TAS5086 codec (got %02x)\n", i); return -ENODEV; } return snd_soc_register_codec(&i2c->dev, &soc_codec_dev_tas5086, &tas5086_dai, 1); } static int tas5086_i2c_remove(struct i2c_client *i2c) { snd_soc_unregister_codec(&i2c->dev); return 0; } static struct i2c_driver tas5086_i2c_driver = { .driver = { .name = "tas5086", .owner = THIS_MODULE, .of_match_table = of_match_ptr(tas5086_dt_ids), }, .id_table = tas5086_i2c_id, .probe = tas5086_i2c_probe, .remove = tas5086_i2c_remove, }; module_i2c_driver(tas5086_i2c_driver); MODULE_AUTHOR("Daniel Mack <zonque@gmail.com>"); MODULE_DESCRIPTION("Texas Instruments TAS5086 ALSA SoC Codec Driver"); MODULE_LICENSE("GPL"); Loading
Documentation/devicetree/bindings/sound/ti,tas5086.txt 0 → 100644 +32 −0 Original line number Diff line number Diff line Texas Instruments TAS5086 6-channel PWM Processor Required properties: - compatible: Should contain "ti,tas5086". - reg: The i2c address. Should contain <0x1b>. Optional properties: - reset-gpio: A GPIO spec to define which pin is connected to the chip's !RESET pin. If specified, the driver will assert a hardware reset at probe time. - ti,charge-period: This property should contain the time in microseconds that closely matches the external single-ended split-capacitor charge period. The hardware chip waits for this period of time before starting the PWM signals. This helps reduce pops and clicks. When not specified, the hardware default of 1300ms is retained. Examples: i2c_bus { tas5086@1b { compatible = "ti,tas5086"; reg = <0x1b>; reset-gpio = <&gpio 23 0>; ti,charge-period = <156000>; }; };
include/sound/tas5086.h 0 → 100644 +7 −0 Original line number Diff line number Diff line #ifndef _SND_SOC_CODEC_TAS5086_H_ #define _SND_SOC_CODEC_TAS5086_H_ #define TAS5086_CLK_IDX_MCLK 0 #define TAS5086_CLK_IDX_SCLK 1 #endif /* _SND_SOC_CODEC_TAS5086_H_ */
sound/soc/codecs/Kconfig +4 −0 Original line number Diff line number Diff line Loading @@ -64,6 +64,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_STA32X if I2C select SND_SOC_STA529 if I2C select SND_SOC_STAC9766 if SND_SOC_AC97_BUS select SND_SOC_TAS5086 if I2C select SND_SOC_TLV320AIC23 if I2C select SND_SOC_TLV320AIC26 if SPI_MASTER select SND_SOC_TLV320AIC32X4 if I2C Loading Loading @@ -324,6 +325,9 @@ config SND_SOC_STA529 config SND_SOC_STAC9766 tristate config SND_SOC_TAS5086 tristate config SND_SOC_TLV320AIC23 tristate Loading
sound/soc/codecs/Makefile +2 −0 Original line number Diff line number Diff line Loading @@ -56,6 +56,7 @@ snd-soc-ssm2602-objs := ssm2602.o snd-soc-sta32x-objs := sta32x.o snd-soc-sta529-objs := sta529.o snd-soc-stac9766-objs := stac9766.o snd-soc-tas5086-objs := tas5086.o snd-soc-tlv320aic23-objs := tlv320aic23.o snd-soc-tlv320aic26-objs := tlv320aic26.o snd-soc-tlv320aic3x-objs := tlv320aic3x.o Loading Loading @@ -179,6 +180,7 @@ obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o obj-$(CONFIG_SND_SOC_STA32X) += snd-soc-sta32x.o obj-$(CONFIG_SND_SOC_STA529) += snd-soc-sta529.o obj-$(CONFIG_SND_SOC_STAC9766) += snd-soc-stac9766.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o obj-$(CONFIG_SND_SOC_TLV320AIC26) += snd-soc-tlv320aic26.o obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o Loading
sound/soc/codecs/tas5086.c 0 → 100644 +591 −0 Original line number Diff line number Diff line /* * TAS5086 ASoC codec driver * * Copyright (c) 2013 Daniel Mack <zonque@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * TODO: * - implement DAPM and input muxing * - implement modulation limit * - implement non-default PWM start * * Note that this chip has a very unusual register layout, specifically * because the registers are of unequal size, and multi-byte registers * require bulk writes to take effect. Regmap does not support that kind * of devices. * * Currently, the driver does not touch any of the registers >= 0x20, so * it doesn't matter because the entire map can be accessed as 8-bit * array. In case more features will be added in the future * that require access to higher registers, the entire regmap H/W I/O * routines have to be open-coded. */ #include <linux/module.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/regmap.h> #include <linux/spi/spi.h> #include <linux/of_device.h> #include <linux/of_gpio.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/tlv.h> #include <sound/tas5086.h> #define TAS5086_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \ SNDRV_PCM_FMTBIT_S20_3LE | \ SNDRV_PCM_FMTBIT_S24_3LE) #define TAS5086_PCM_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \ SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 | \ SNDRV_PCM_RATE_192000) /* * TAS5086 registers */ #define TAS5086_CLOCK_CONTROL 0x00 /* Clock control register */ #define TAS5086_CLOCK_RATE(val) (val << 5) #define TAS5086_CLOCK_RATE_MASK (0x7 << 5) #define TAS5086_CLOCK_RATIO(val) (val << 2) #define TAS5086_CLOCK_RATIO_MASK (0x7 << 2) #define TAS5086_CLOCK_SCLK_RATIO_48 (1 << 1) #define TAS5086_CLOCK_VALID (1 << 0) #define TAS5086_DEEMPH_MASK 0x03 #define TAS5086_SOFT_MUTE_ALL 0x3f #define TAS5086_DEV_ID 0x01 /* Device ID register */ #define TAS5086_ERROR_STATUS 0x02 /* Error status register */ #define TAS5086_SYS_CONTROL_1 0x03 /* System control register 1 */ #define TAS5086_SERIAL_DATA_IF 0x04 /* Serial data interface register */ #define TAS5086_SYS_CONTROL_2 0x05 /* System control register 2 */ #define TAS5086_SOFT_MUTE 0x06 /* Soft mute register */ #define TAS5086_MASTER_VOL 0x07 /* Master volume */ #define TAS5086_CHANNEL_VOL(X) (0x08 + (X)) /* Channel 1-6 volume */ #define TAS5086_VOLUME_CONTROL 0x09 /* Volume control register */ #define TAS5086_MOD_LIMIT 0x10 /* Modulation limit register */ #define TAS5086_PWM_START 0x18 /* PWM start register */ #define TAS5086_SURROUND 0x19 /* Surround register */ #define TAS5086_SPLIT_CAP_CHARGE 0x1a /* Split cap charge period register */ #define TAS5086_OSC_TRIM 0x1b /* Oscillator trim register */ #define TAS5086_BKNDERR 0x1c /* * Default TAS5086 power-up configuration */ static const struct reg_default tas5086_reg_defaults[] = { { 0x00, 0x6c }, { 0x01, 0x03 }, { 0x02, 0x00 }, { 0x03, 0xa0 }, { 0x04, 0x05 }, { 0x05, 0x60 }, { 0x06, 0x00 }, { 0x07, 0xff }, { 0x08, 0x30 }, { 0x09, 0x30 }, { 0x0a, 0x30 }, { 0x0b, 0x30 }, { 0x0c, 0x30 }, { 0x0d, 0x30 }, { 0x0e, 0xb1 }, { 0x0f, 0x00 }, { 0x10, 0x02 }, { 0x11, 0x00 }, { 0x12, 0x00 }, { 0x13, 0x00 }, { 0x14, 0x00 }, { 0x15, 0x00 }, { 0x16, 0x00 }, { 0x17, 0x00 }, { 0x18, 0x3f }, { 0x19, 0x00 }, { 0x1a, 0x18 }, { 0x1b, 0x82 }, { 0x1c, 0x05 }, }; static bool tas5086_accessible_reg(struct device *dev, unsigned int reg) { return !((reg == 0x0f) || (reg >= 0x11 && reg <= 0x17)); } static bool tas5086_volatile_reg(struct device *dev, unsigned int reg) { switch (reg) { case TAS5086_DEV_ID: case TAS5086_ERROR_STATUS: return true; } return false; } static bool tas5086_writeable_reg(struct device *dev, unsigned int reg) { return tas5086_accessible_reg(dev, reg) && (reg != TAS5086_DEV_ID); } struct tas5086_private { struct regmap *regmap; unsigned int mclk, sclk; unsigned int format; bool deemph; /* Current sample rate for de-emphasis control */ int rate; /* GPIO driving Reset pin, if any */ int gpio_nreset; }; static int tas5086_deemph[] = { 0, 32000, 44100, 48000 }; static int tas5086_set_deemph(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); int i, val = 0; if (priv->deemph) for (i = 0; i < ARRAY_SIZE(tas5086_deemph); i++) if (tas5086_deemph[i] == priv->rate) val = i; return regmap_update_bits(priv->regmap, TAS5086_SYS_CONTROL_1, TAS5086_DEEMPH_MASK, val); } static int tas5086_get_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); ucontrol->value.enumerated.item[0] = priv->deemph; return 0; } static int tas5086_put_deemph(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); priv->deemph = ucontrol->value.enumerated.item[0]; return tas5086_set_deemph(codec); } static int tas5086_set_dai_sysclk(struct snd_soc_dai *codec_dai, int clk_id, unsigned int freq, int dir) { struct snd_soc_codec *codec = codec_dai->codec; struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); switch (clk_id) { case TAS5086_CLK_IDX_MCLK: priv->mclk = freq; break; case TAS5086_CLK_IDX_SCLK: priv->sclk = freq; break; } return 0; } static int tas5086_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int format) { struct snd_soc_codec *codec = codec_dai->codec; struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); /* The TAS5086 can only be slave to all clocks */ if ((format & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) { dev_err(codec->dev, "Invalid clocking mode\n"); return -EINVAL; } /* we need to refer to the data format from hw_params() */ priv->format = format; return 0; } static const int tas5086_sample_rates[] = { 32000, 38000, 44100, 48000, 88200, 96000, 176400, 192000 }; static const int tas5086_ratios[] = { 64, 128, 192, 256, 384, 512 }; static int index_in_array(const int *array, int len, int needle) { int i; for (i = 0; i < len; i++) if (array[i] == needle) return i; return -ENOENT; } static int tas5086_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { struct snd_soc_codec *codec = dai->codec; struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); int val; int ret; priv->rate = params_rate(params); /* Look up the sample rate and refer to the offset in the list */ val = index_in_array(tas5086_sample_rates, ARRAY_SIZE(tas5086_sample_rates), priv->rate); if (val < 0) { dev_err(codec->dev, "Invalid sample rate\n"); return -EINVAL; } ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, TAS5086_CLOCK_RATE_MASK, TAS5086_CLOCK_RATE(val)); if (ret < 0) return ret; /* MCLK / Fs ratio */ val = index_in_array(tas5086_ratios, ARRAY_SIZE(tas5086_ratios), priv->mclk / priv->rate); if (val < 0) { dev_err(codec->dev, "Inavlid MCLK / Fs ratio\n"); return -EINVAL; } ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, TAS5086_CLOCK_RATIO_MASK, TAS5086_CLOCK_RATIO(val)); if (ret < 0) return ret; ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, TAS5086_CLOCK_SCLK_RATIO_48, (priv->sclk == 48 * priv->rate) ? TAS5086_CLOCK_SCLK_RATIO_48 : 0); if (ret < 0) return ret; /* * The chip has a very unituitive register mapping and muxes information * about data format and sample depth into the same register, but not on * a logical bit-boundary. Hence, we have to refer to the format passed * in the set_dai_fmt() callback and set up everything from here. * * First, determine the 'base' value, using the format ... */ switch (priv->format & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_RIGHT_J: val = 0x00; break; case SND_SOC_DAIFMT_I2S: val = 0x03; break; case SND_SOC_DAIFMT_LEFT_J: val = 0x06; break; default: dev_err(codec->dev, "Invalid DAI format\n"); return -EINVAL; } /* ... then add the offset for the sample bit depth. */ switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: val += 0; break; case SNDRV_PCM_FORMAT_S20_3LE: val += 1; break; case SNDRV_PCM_FORMAT_S24_3LE: val += 2; break; default: dev_err(codec->dev, "Invalid bit width\n"); return -EINVAL; }; ret = regmap_write(priv->regmap, TAS5086_SERIAL_DATA_IF, val); if (ret < 0) return ret; /* clock is considered valid now */ ret = regmap_update_bits(priv->regmap, TAS5086_CLOCK_CONTROL, TAS5086_CLOCK_VALID, TAS5086_CLOCK_VALID); if (ret < 0) return ret; return tas5086_set_deemph(codec); } static int tas5086_mute_stream(struct snd_soc_dai *dai, int mute, int stream) { struct snd_soc_codec *codec = dai->codec; struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); unsigned int val = 0; if (mute) val = TAS5086_SOFT_MUTE_ALL; return regmap_write(priv->regmap, TAS5086_SOFT_MUTE, val); } /* TAS5086 controls */ static const DECLARE_TLV_DB_SCALE(tas5086_dac_tlv, -10350, 50, 1); static const struct snd_kcontrol_new tas5086_controls[] = { SOC_SINGLE_TLV("Master Playback Volume", TAS5086_MASTER_VOL, 0, 0xff, 1, tas5086_dac_tlv), SOC_DOUBLE_R_TLV("Channel 1/2 Playback Volume", TAS5086_CHANNEL_VOL(0), TAS5086_CHANNEL_VOL(1), 0, 0xff, 1, tas5086_dac_tlv), SOC_DOUBLE_R_TLV("Channel 3/4 Playback Volume", TAS5086_CHANNEL_VOL(2), TAS5086_CHANNEL_VOL(3), 0, 0xff, 1, tas5086_dac_tlv), SOC_DOUBLE_R_TLV("Channel 5/6 Playback Volume", TAS5086_CHANNEL_VOL(4), TAS5086_CHANNEL_VOL(5), 0, 0xff, 1, tas5086_dac_tlv), SOC_SINGLE_BOOL_EXT("De-emphasis Switch", 0, tas5086_get_deemph, tas5086_put_deemph), }; static const struct snd_soc_dai_ops tas5086_dai_ops = { .hw_params = tas5086_hw_params, .set_sysclk = tas5086_set_dai_sysclk, .set_fmt = tas5086_set_dai_fmt, .mute_stream = tas5086_mute_stream, }; static struct snd_soc_dai_driver tas5086_dai = { .name = "tas5086-hifi", .playback = { .stream_name = "Playback", .channels_min = 2, .channels_max = 6, .rates = TAS5086_PCM_RATES, .formats = TAS5086_PCM_FORMATS, }, .ops = &tas5086_dai_ops, }; #ifdef CONFIG_PM static int tas5086_soc_resume(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); /* Restore codec state */ return regcache_sync(priv->regmap); } #else #define tas5086_soc_resume NULL #endif /* CONFIG_PM */ #ifdef CONFIG_OF static const struct of_device_id tas5086_dt_ids[] = { { .compatible = "ti,tas5086", }, { } }; MODULE_DEVICE_TABLE(of, tas5086_dt_ids); #endif /* charge period values in microseconds */ static const int tas5086_charge_period[] = { 13000, 16900, 23400, 31200, 41600, 54600, 72800, 96200, 130000, 156000, 234000, 312000, 416000, 546000, 728000, 962000, 1300000, 169000, 2340000, 3120000, 4160000, 5460000, 7280000, 9620000, }; static int tas5086_probe(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); int charge_period = 1300000; /* hardware default is 1300 ms */ int i, ret; if (of_match_device(of_match_ptr(tas5086_dt_ids), codec->dev)) { struct device_node *of_node = codec->dev->of_node; of_property_read_u32(of_node, "ti,charge-period", &charge_period); } /* lookup and set split-capacitor charge period */ if (charge_period == 0) { regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, 0); } else { i = index_in_array(tas5086_charge_period, ARRAY_SIZE(tas5086_charge_period), charge_period); if (i >= 0) regmap_write(priv->regmap, TAS5086_SPLIT_CAP_CHARGE, i + 0x08); else dev_warn(codec->dev, "Invalid split-cap charge period of %d ns.\n", charge_period); } /* enable factory trim */ ret = regmap_write(priv->regmap, TAS5086_OSC_TRIM, 0x00); if (ret < 0) return ret; /* start all channels */ ret = regmap_write(priv->regmap, TAS5086_SYS_CONTROL_2, 0x20); if (ret < 0) return ret; /* set master volume to 0 dB */ ret = regmap_write(priv->regmap, TAS5086_MASTER_VOL, 0x30); if (ret < 0) return ret; /* mute all channels for now */ ret = regmap_write(priv->regmap, TAS5086_SOFT_MUTE, TAS5086_SOFT_MUTE_ALL); if (ret < 0) return ret; return 0; } static int tas5086_remove(struct snd_soc_codec *codec) { struct tas5086_private *priv = snd_soc_codec_get_drvdata(codec); if (gpio_is_valid(priv->gpio_nreset)) /* Set codec to the reset state */ gpio_set_value(priv->gpio_nreset, 0); return 0; }; static struct snd_soc_codec_driver soc_codec_dev_tas5086 = { .probe = tas5086_probe, .remove = tas5086_remove, .resume = tas5086_soc_resume, .controls = tas5086_controls, .num_controls = ARRAY_SIZE(tas5086_controls), }; static const struct i2c_device_id tas5086_i2c_id[] = { { "tas5086", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, tas5086_i2c_id); static const struct regmap_config tas5086_regmap = { .reg_bits = 8, .val_bits = 8, .max_register = ARRAY_SIZE(tas5086_reg_defaults), .reg_defaults = tas5086_reg_defaults, .num_reg_defaults = ARRAY_SIZE(tas5086_reg_defaults), .cache_type = REGCACHE_RBTREE, .volatile_reg = tas5086_volatile_reg, .writeable_reg = tas5086_writeable_reg, .readable_reg = tas5086_accessible_reg, }; static int tas5086_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct tas5086_private *priv; struct device *dev = &i2c->dev; int gpio_nreset = -EINVAL; int i, ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->regmap = devm_regmap_init_i2c(i2c, &tas5086_regmap); if (IS_ERR(priv->regmap)) { ret = PTR_ERR(priv->regmap); dev_err(&i2c->dev, "Failed to create regmap: %d\n", ret); return ret; } i2c_set_clientdata(i2c, priv); if (of_match_device(of_match_ptr(tas5086_dt_ids), dev)) { struct device_node *of_node = dev->of_node; gpio_nreset = of_get_named_gpio(of_node, "reset-gpio", 0); } if (gpio_is_valid(gpio_nreset)) if (devm_gpio_request(dev, gpio_nreset, "TAS5086 Reset")) gpio_nreset = -EINVAL; if (gpio_is_valid(gpio_nreset)) { /* Reset codec - minimum assertion time is 400ns */ gpio_direction_output(gpio_nreset, 0); udelay(1); gpio_set_value(gpio_nreset, 1); /* Codec needs ~15ms to wake up */ msleep(15); } priv->gpio_nreset = gpio_nreset; /* The TAS5086 always returns 0x03 in its TAS5086_DEV_ID register */ ret = regmap_read(priv->regmap, TAS5086_DEV_ID, &i); if (ret < 0) return ret; if (i != 0x3) { dev_err(dev, "Failed to identify TAS5086 codec (got %02x)\n", i); return -ENODEV; } return snd_soc_register_codec(&i2c->dev, &soc_codec_dev_tas5086, &tas5086_dai, 1); } static int tas5086_i2c_remove(struct i2c_client *i2c) { snd_soc_unregister_codec(&i2c->dev); return 0; } static struct i2c_driver tas5086_i2c_driver = { .driver = { .name = "tas5086", .owner = THIS_MODULE, .of_match_table = of_match_ptr(tas5086_dt_ids), }, .id_table = tas5086_i2c_id, .probe = tas5086_i2c_probe, .remove = tas5086_i2c_remove, }; module_i2c_driver(tas5086_i2c_driver); MODULE_AUTHOR("Daniel Mack <zonque@gmail.com>"); MODULE_DESCRIPTION("Texas Instruments TAS5086 ALSA SoC Codec Driver"); MODULE_LICENSE("GPL");
