fw-api: CL 14990944 - update fw common interface files (53ceeaad) · Commits · e / devices / android_kernel_fairphone_FP4

fw/wmi_tlv_defs.h

+3 −1

Original line number	Diff line number	Diff line
		@@ -1194,6 +1194,7 @@ typedef enum {
		WMITLV_TAG_STRUC_wmi_roam_ml_key_material_param,
		WMITLV_TAG_STRUC_wmi_roam_cnd_vendor_scoring_param,
		WMITLV_TAG_STRUC_wmi_owe_ap_profile,
		WMITLV_TAG_STRUC_wmi_roam_btm_request_candidate_info_tlv_param,
		} WMITLV_TAG_ID;

		/*
		@@ -4353,7 +4354,8 @@ WMITLV_CREATE_PARAM_STRUC(WMI_WLM_CONFIG_CMDID);
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_roam_frame_info, roam_frame_info, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_roam_initial_info, roam_initial_info, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_roam_btm_response_info, roam_btm_response_info, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_roam_msg_info, roam_msg_info, WMITLV_SIZE_VAR)
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_roam_msg_info, roam_msg_info, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_roam_btm_request_candidate_info, roam_btm_request_candidate_info, WMITLV_SIZE_VAR)
		WMITLV_CREATE_PARAM_STRUC(WMI_ROAM_STATS_EVENTID);

		/* Motion detection cmd */

fw/wmi_unified.h

+71 −2

Original line number	Diff line number	Diff line
		@@ -31448,9 +31448,11 @@ typedef struct {
		#endif
		struct {
		/* opaque space reservation for vendor-specific fields */
		A_UINT32 vendor_specific2[3];
		A_UINT32 vendor_specific2[4];
		};
		};
		/* btm_req_dialog_token: dialog token number in BTM request frame */
		A_UINT32 btm_req_dialog_token;
		} wmi_roam_trigger_reason;

		typedef struct {
		@@ -31467,6 +31469,12 @@ typedef struct {
		A_UINT32 roam_scan_channel_count; /* Number of channels scanned during roam scan */
		A_UINT32 roam_ap_count; /* Number of roamable APs */
		A_UINT32 frame_info_count; /* Number of frame info */
		/*
		* scan_complete_timestamp is the absolute time w.r.t host timer
		* which is synchronized between the host and target.
		* This timestamp indicates the time when roam scan finished.
		*/
		A_UINT32 scan_complete_timestamp; /* milli second units */
		} wmi_roam_scan_info;

		typedef struct {
		@@ -31584,6 +31592,12 @@ typedef struct {
		*/
		A_UINT32 neighbor_report_response_timestamp; /* in milli seconds */
		A_UINT32 neighbor_report_channel_count; /* Number of channels received in neighbor report response */
		A_UINT32 btm_query_token; /* btm query dialog token */
		/* btm_query_reason_code:
		* Transition Query Reasons are enumerated in table 7-43x
		* of the 802.11v spec.
		*/
		A_UINT32 btm_query_reason_code;
		} wmi_roam_neighbor_report_info;

		typedef struct {
		@@ -31613,8 +31627,20 @@ typedef struct {
		* This timestamp indicates the time when btm response is sent.
		*/
		A_UINT32 timestamp; /* milli second units */
		A_UINT32 btm_resp_dialog_token; /* dialog_token in btm response frame */
		/* btm_resp_bss_termination_delay:
		* bss_termination_delay in btm response frame is the number of minutes
		* that the responding STA requests the BSS to delay termination.
		*/
		A_UINT32 btm_resp_bss_termination_delay;
		} wmi_roam_btm_response_info;

		typedef struct {
		A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_btm_request_candidate_info_tlv_param */
		wmi_mac_addr btm_candidate_bssid; /* BTM candidate MAC address */
		A_UINT32 preference; /* preference in Preference IE */
		} wmi_roam_btm_request_candidate_info;

		typedef struct {
		A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_neighbor_report_channel_info_tlv_param */
		A_UINT32 channel; /* Channel frequency in MHz */
		@@ -31627,14 +31653,57 @@ typedef struct {
		/*
		* frame_info = frame_type \| (frame_subtype << 2) \| (request_or_response << 6)\| (seq_num << 16)
		* frame_type(2 bits), frame_subtype(4 bits) are from 802.11 spec.
		* If frame_type is WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT, frame_subtype
		* should be one of value in WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT_SUBTYPE.
		* request_or_response(1 bit) - Valid if frame_subtype is authentication.
		* 0 - Authentication request 1 - Authentication response
		* seq_num(16 bits) - frame sequence number
		*/
		A_UINT32 frame_info;
		A_UINT32 status_code; /* Status code from 802.11 spec, section 9.4.1.9 */

		/* status_code:
		* For Rx frames : Status code from 802.11 spec, section 9.4.1.9
		* For Rx frames (deauth / disassoc) : Reason code from 802.11 spec,
		* section 9.4.1.7
		* For Tx frames : Status_code should be one of value in
		* WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT_STATUS
		*/
		A_UINT32 status_code;
		/*
		* rssi_dbm_abs
		* Last known RSSI of the current BSSID at the moment when the frame
		* was sent and received.
		* This rssi value is valid for deauth / disassoc frame only.
		* The rssi_dbm_abs value is the absolute value of the RSSI in dBm units.
		* For example, if the RSSI is -40 dBm, rssi_dbm_abs will be 40.
		*/
		A_UINT32 rssi_dbm_abs;
		/* retry_count
		* To show how many times the same frame (but with different
		* sequence number) is retransmitted, in protocol level.
		*/
		A_UINT32 retry_count;
		} wmi_roam_frame_info;

		typedef enum {
		WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT = 3,
		} WMI_ROAM_FRAME_INFO_FRAME_TYPE;

		typedef enum {
		WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT_SUBTYPE_M1 = 1,
		WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT_SUBTYPE_M2,
		WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT_SUBTYPE_M3,
		WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT_SUBTYPE_M4,
		WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT_SUBTYPE_GTK_M1,
		WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT_SUBTYPE_GTK_M2,
		} WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT_SUBTYPE;

		typedef enum {
		WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT_STATUS_ACK = 0,
		WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT_STATUS_NO_ACK,
		WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT_STATUS_TX_FAIL,
		} WMI_ROAM_FRAME_INFO_FRAME_TYPE_EXT_STATUS;

		typedef struct {
		A_UINT32 tlv_header; /* TLV tag and len; tag equals WMITLV_TAG_STRUC_wmi_roam_initial_info_tlv_param */

fw/wmi_version.h

+1 −1

Original line number	Diff line number	Diff line
		@@ -36,7 +36,7 @@
		#define __WMI_VER_MINOR_ 0
		/** WMI revision number has to be incremented when there is a
		* change that may or may not break compatibility. */
		#define __WMI_REVISION_ 1038
		#define __WMI_REVISION_ 1039

		/** The Version Namespace should not be normally changed. Only
		* host and firmware of the same WMI namespace will work