Loading Documentation/hwmon/w83627ehf +7 −2 Original line number Diff line number Diff line Loading @@ -50,7 +50,7 @@ W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I (NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively as Winbond chips. The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F), The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F), 2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID (except for 627UHG), alarms with beep warnings (control unimplemented), and some automatic fan regulation strategies (plus manual fan control mode). Loading Loading @@ -143,8 +143,13 @@ pwm[1-4]_min_output - minimum fan speed (range 1 - 255), when the temperature pwm[1-4]_stop_time - how many milliseconds [ms] must elapse to switch corresponding fan off. (when the temperature was below defined range). pwm[1-4]_start_output-minimum fan speed (range 1 - 255) when spinning up pwm[1-4]_step_output- rate of fan speed change (1 - 255) pwm[1-4]_stop_output- minimum fan speed (range 1 - 255) when spinning down pwm[1-4]_max_output - maximum fan speed (range 1 - 255), when the temperature is above defined range. Note: last two functions are influenced by other control bits, not yet exported Note: last six functions are influenced by other control bits, not yet exported by the driver, so a change might not have any effect. Implementation Details Loading Documentation/hwmon/zl6100 +6 −8 Original line number Diff line number Diff line Loading @@ -88,14 +88,12 @@ Module parameters delay ----- Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms appears to be sufficient and has not caused any problems in testing. The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms except for ZL2004 and ZL6105. To enable manual override, the driver provides a writeable module parameter, 'delay', which can be used to set the interval to a value between 0 and 65,535 microseconds. Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms appears to be sufficient and has not caused any problems in testing. The problem is known to affect all currently supported chips. For manual override, the driver provides a writeable module parameter, 'delay', which can be used to set the interval to a value between 0 and 65,535 microseconds. Sysfs entries Loading MAINTAINERS +42 −4 Original line number Diff line number Diff line Loading @@ -1514,19 +1514,23 @@ F: drivers/mtd/devices/block2mtd.c BLUETOOTH DRIVERS M: Marcel Holtmann <marcel@holtmann.org> M: "Gustavo F. Padovan" <padovan@profusion.mobi> M: Gustavo Padovan <gustavo@padovan.org> M: Johan Hedberg <johan.hedberg@gmail.com> L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git S: Maintained F: drivers/bluetooth/ BLUETOOTH SUBSYSTEM M: Marcel Holtmann <marcel@holtmann.org> M: "Gustavo F. Padovan" <padovan@profusion.mobi> M: Gustavo Padovan <gustavo@padovan.org> M: Johan Hedberg <johan.hedberg@gmail.com> L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git S: Maintained F: net/bluetooth/ F: include/net/bluetooth/ Loading Loading @@ -1717,6 +1721,14 @@ F: include/linux/can/error.h F: include/linux/can/netlink.h F: include/linux/can/platform/ CAPABILITIES M: Serge Hallyn <serge.hallyn@canonical.com> L: linux-security-module@vger.kernel.org S: Supported F: include/linux/capability.h F: security/capability.c F: security/commoncap.c CELL BROADBAND ENGINE ARCHITECTURE M: Arnd Bergmann <arnd@arndb.de> L: linuxppc-dev@lists.ozlabs.org Loading Loading @@ -2352,6 +2364,15 @@ S: Supported F: drivers/gpu/drm/exynos F: include/drm/exynos* EXYNOS MIPI DISPLAY DRIVERS M: Inki Dae <inki.dae@samsung.com> M: Donghwa Lee <dh09.lee@samsung.com> M: Kyungmin Park <kyungmin.park@samsung.com> L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/exynos/exynos_mipi* F: include/video/exynos_mipi* DSCC4 DRIVER M: Francois Romieu <romieu@fr.zoreil.com> L: netdev@vger.kernel.org Loading Loading @@ -2846,6 +2867,12 @@ S: Maintained F: drivers/media/video/m5mols/ F: include/media/m5mols.h FUJITSU TABLET EXTRAS M: Robert Gerlach <khnz@gmx.de> L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/fujitsu-tablet.c FUSE: FILESYSTEM IN USERSPACE M: Miklos Szeredi <miklos@szeredi.hu> L: fuse-devel@lists.sourceforge.net Loading Loading @@ -5863,6 +5890,7 @@ F: drivers/mmc/host/sdhci-s3c.c SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER M: Viresh Kumar <viresh.kumar@st.com> L: spear-devel@list.st.com L: linux-mmc@vger.kernel.org S: Maintained F: drivers/mmc/host/sdhci-spear.c Loading Loading @@ -6205,24 +6233,32 @@ F: drivers/tty/serial/sunzilog.h SPEAR PLATFORM SUPPORT M: Viresh Kumar <viresh.kumar@st.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/plat-spear/ SPEAR3XX MACHINE SUPPORT M: Viresh Kumar <viresh.kumar@st.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/mach-spear3xx/ SPEAR6XX MACHINE SUPPORT M: Rajeev Kumar <rajeev-dlh.kumar@st.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/mach-spear6xx/ SPEAR CLOCK FRAMEWORK SUPPORT M: Viresh Kumar <viresh.kumar@st.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/mach-spear*/clock.c Loading @@ -6231,6 +6267,8 @@ F: arch/arm/plat-spear/include/plat/clock.h SPEAR PAD MULTIPLEXING SUPPORT M: Viresh Kumar <viresh.kumar@st.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/plat-spear/include/plat/padmux.h Loading Makefile +1 −1 Original line number Diff line number Diff line VERSION = 3 PATCHLEVEL = 3 SUBLEVEL = 0 EXTRAVERSION = -rc6 EXTRAVERSION = NAME = Saber-toothed Squirrel # *DOCUMENTATION* Loading arch/arm/mach-shmobile/board-ag5evm.c +1 −0 Original line number Diff line number Diff line Loading @@ -38,6 +38,7 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/sh_clk.h> #include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> Loading Loading
Documentation/hwmon/w83627ehf +7 −2 Original line number Diff line number Diff line Loading @@ -50,7 +50,7 @@ W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I (NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively as Winbond chips. The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F), The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F), 2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID (except for 627UHG), alarms with beep warnings (control unimplemented), and some automatic fan regulation strategies (plus manual fan control mode). Loading Loading @@ -143,8 +143,13 @@ pwm[1-4]_min_output - minimum fan speed (range 1 - 255), when the temperature pwm[1-4]_stop_time - how many milliseconds [ms] must elapse to switch corresponding fan off. (when the temperature was below defined range). pwm[1-4]_start_output-minimum fan speed (range 1 - 255) when spinning up pwm[1-4]_step_output- rate of fan speed change (1 - 255) pwm[1-4]_stop_output- minimum fan speed (range 1 - 255) when spinning down pwm[1-4]_max_output - maximum fan speed (range 1 - 255), when the temperature is above defined range. Note: last two functions are influenced by other control bits, not yet exported Note: last six functions are influenced by other control bits, not yet exported by the driver, so a change might not have any effect. Implementation Details Loading
Documentation/hwmon/zl6100 +6 −8 Original line number Diff line number Diff line Loading @@ -88,14 +88,12 @@ Module parameters delay ----- Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms appears to be sufficient and has not caused any problems in testing. The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms except for ZL2004 and ZL6105. To enable manual override, the driver provides a writeable module parameter, 'delay', which can be used to set the interval to a value between 0 and 65,535 microseconds. Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms appears to be sufficient and has not caused any problems in testing. The problem is known to affect all currently supported chips. For manual override, the driver provides a writeable module parameter, 'delay', which can be used to set the interval to a value between 0 and 65,535 microseconds. Sysfs entries Loading
MAINTAINERS +42 −4 Original line number Diff line number Diff line Loading @@ -1514,19 +1514,23 @@ F: drivers/mtd/devices/block2mtd.c BLUETOOTH DRIVERS M: Marcel Holtmann <marcel@holtmann.org> M: "Gustavo F. Padovan" <padovan@profusion.mobi> M: Gustavo Padovan <gustavo@padovan.org> M: Johan Hedberg <johan.hedberg@gmail.com> L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git S: Maintained F: drivers/bluetooth/ BLUETOOTH SUBSYSTEM M: Marcel Holtmann <marcel@holtmann.org> M: "Gustavo F. Padovan" <padovan@profusion.mobi> M: Gustavo Padovan <gustavo@padovan.org> M: Johan Hedberg <johan.hedberg@gmail.com> L: linux-bluetooth@vger.kernel.org W: http://www.bluez.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/jh/bluetooth.git S: Maintained F: net/bluetooth/ F: include/net/bluetooth/ Loading Loading @@ -1717,6 +1721,14 @@ F: include/linux/can/error.h F: include/linux/can/netlink.h F: include/linux/can/platform/ CAPABILITIES M: Serge Hallyn <serge.hallyn@canonical.com> L: linux-security-module@vger.kernel.org S: Supported F: include/linux/capability.h F: security/capability.c F: security/commoncap.c CELL BROADBAND ENGINE ARCHITECTURE M: Arnd Bergmann <arnd@arndb.de> L: linuxppc-dev@lists.ozlabs.org Loading Loading @@ -2352,6 +2364,15 @@ S: Supported F: drivers/gpu/drm/exynos F: include/drm/exynos* EXYNOS MIPI DISPLAY DRIVERS M: Inki Dae <inki.dae@samsung.com> M: Donghwa Lee <dh09.lee@samsung.com> M: Kyungmin Park <kyungmin.park@samsung.com> L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/exynos/exynos_mipi* F: include/video/exynos_mipi* DSCC4 DRIVER M: Francois Romieu <romieu@fr.zoreil.com> L: netdev@vger.kernel.org Loading Loading @@ -2846,6 +2867,12 @@ S: Maintained F: drivers/media/video/m5mols/ F: include/media/m5mols.h FUJITSU TABLET EXTRAS M: Robert Gerlach <khnz@gmx.de> L: platform-driver-x86@vger.kernel.org S: Maintained F: drivers/platform/x86/fujitsu-tablet.c FUSE: FILESYSTEM IN USERSPACE M: Miklos Szeredi <miklos@szeredi.hu> L: fuse-devel@lists.sourceforge.net Loading Loading @@ -5863,6 +5890,7 @@ F: drivers/mmc/host/sdhci-s3c.c SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER M: Viresh Kumar <viresh.kumar@st.com> L: spear-devel@list.st.com L: linux-mmc@vger.kernel.org S: Maintained F: drivers/mmc/host/sdhci-spear.c Loading Loading @@ -6205,24 +6233,32 @@ F: drivers/tty/serial/sunzilog.h SPEAR PLATFORM SUPPORT M: Viresh Kumar <viresh.kumar@st.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/plat-spear/ SPEAR3XX MACHINE SUPPORT M: Viresh Kumar <viresh.kumar@st.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/mach-spear3xx/ SPEAR6XX MACHINE SUPPORT M: Rajeev Kumar <rajeev-dlh.kumar@st.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/mach-spear6xx/ SPEAR CLOCK FRAMEWORK SUPPORT M: Viresh Kumar <viresh.kumar@st.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/mach-spear*/clock.c Loading @@ -6231,6 +6267,8 @@ F: arch/arm/plat-spear/include/plat/clock.h SPEAR PAD MULTIPLEXING SUPPORT M: Viresh Kumar <viresh.kumar@st.com> L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear S: Maintained F: arch/arm/plat-spear/include/plat/padmux.h Loading
Makefile +1 −1 Original line number Diff line number Diff line VERSION = 3 PATCHLEVEL = 3 SUBLEVEL = 0 EXTRAVERSION = -rc6 EXTRAVERSION = NAME = Saber-toothed Squirrel # *DOCUMENTATION* Loading
arch/arm/mach-shmobile/board-ag5evm.c +1 −0 Original line number Diff line number Diff line Loading @@ -38,6 +38,7 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <linux/sh_clk.h> #include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> #include <sound/sh_fsi.h> Loading
