Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 4a5f7bda authored by Mark Brown's avatar Mark Brown
Browse files

ASoC: Add platform data for WM9081 IRQ pin configuration 



The WM9081 IRQ output can be either active high or active low and can
support either CMOS or open drain modes.

Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: default avatarLiam Girdwood <lrg@slimlogic.co.uk>
parent 49542656

include/sound/wm9081.h

+6 −3
Original line number Diff line number Diff line
@@ -17,9 +17,12 @@ struct wm9081_retune_mobile_setting { 
	u16 config[20];

};



struct wm9081_retune_mobile_config {

	struct wm9081_retune_mobile_setting *configs;

	int num_configs;

struct wm9081_pdata {

	bool irq_high;   /* IRQ is active high */

	bool irq_cmos;   /* IRQ is in CMOS mode */



	struct wm9081_retune_mobile_setting *retune_configs;

	int num_retune_configs;

};



#endif

sound/soc/codecs/wm9081.c

+19 −10
Original line number Diff line number Diff line
@@ -167,7 +167,7 @@ struct wm9081_priv { 
	int fll_fref;

	int fll_fout;

	int tdm_width;

	struct wm9081_retune_mobile_config *retune;

	struct wm9081_pdata pdata;

};



static int wm9081_volatile_register(struct snd_soc_codec *codec, unsigned int reg)
@@ -1082,21 +1082,22 @@ static int wm9081_hw_params(struct snd_pcm_substream *substream, 
	aif4 |= wm9081->bclk / wm9081->fs;



	/* Apply a ReTune Mobile configuration if it's in use */

	if (wm9081->retune) {

		struct wm9081_retune_mobile_config *retune = wm9081->retune;

	if (wm9081->pdata.num_retune_configs) {

		struct wm9081_pdata *pdata = &wm9081->pdata;

		struct wm9081_retune_mobile_setting *s;

		int eq1;



		best = 0;

		best_val = abs(retune->configs[0].rate - wm9081->fs);

		for (i = 0; i < retune->num_configs; i++) {

			cur_val = abs(retune->configs[i].rate - wm9081->fs);

		best_val = abs(pdata->retune_configs[0].rate - wm9081->fs);

		for (i = 0; i < pdata->num_retune_configs; i++) {

			cur_val = abs(pdata->retune_configs[i].rate -

				      wm9081->fs);

			if (cur_val < best_val) {

				best_val = cur_val;

				best = i;

			}

		}

		s = &retune->configs[best];

		s = &pdata->retune_configs[best];



		dev_dbg(codec->dev, "ReTune Mobile %s tuned for %dHz\n",

			s->name, s->rate);
@@ -1255,6 +1256,14 @@ static int wm9081_probe(struct snd_soc_codec *codec) 
		return ret;

	}



	reg = 0;

	if (wm9081->pdata.irq_high)

		reg |= WM9081_IRQ_POL;

	if (!wm9081->pdata.irq_cmos)

		reg |= WM9081_IRQ_OP_CTRL;

	snd_soc_update_bits(codec, WM9081_INTERRUPT_CONTROL,

			    WM9081_IRQ_POL | WM9081_IRQ_OP_CTRL, reg);



	wm9081_set_bias_level(codec, SND_SOC_BIAS_STANDBY);



	/* Enable zero cross by default */
@@ -1266,7 +1275,7 @@ static int wm9081_probe(struct snd_soc_codec *codec) 


	snd_soc_add_controls(codec, wm9081_snd_controls,

			     ARRAY_SIZE(wm9081_snd_controls));

	if (!wm9081->retune) {

	if (!wm9081->pdata.num_retune_configs) {

		dev_dbg(codec->dev,

			"No ReTune Mobile data, using normal EQ\n");

		snd_soc_add_controls(codec, wm9081_eq_controls,
@@ -1343,8 +1352,8 @@ static __devinit int wm9081_i2c_probe(struct i2c_client *i2c, 
	wm9081->control_data = i2c;



	if (dev_get_platdata(&i2c->dev))

		memcpy(&wm9081->retune, dev_get_platdata(&i2c->dev),

		       sizeof(wm9081->retune));

		memcpy(&wm9081->pdata, dev_get_platdata(&i2c->dev),

		       sizeof(wm9081->pdata));



	ret = snd_soc_register_codec(&i2c->dev,

			&soc_codec_dev_wm9081, &wm9081_dai, 1);