Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 4a36853c authored by Mukund Madhusudan Atre's avatar Mukund Madhusudan Atre
Browse files

ARM: dts: msm: Add support for TOF sensor in camera for kona 



Adding TOF sensor node in camera device tree with respective
pmic and gpio data for all applicable platforms.

Change-Id: I9a46151ccc2307d15390e8dbff370f4ac8d8a8f0
Signed-off-by: default avatarMukund Madhusudan Atre <matre@codeaurora.org>
parent 3898f87b

arch/arm64/boot/dts/qcom/kona-camera-sensor-cdp.dtsi

+40 −0
Original line number Diff line number Diff line
@@ -280,5 +280,45 @@ 
		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor3 {

		cell-index = <3>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <3>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		cam_vio-supply = <&pm8009_l7>;

		cam_vdig-supply = <&vreg_tof>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3600000 0>;

		rgltr-max-voltage = <0 3600000 0>;

		rgltr-load-current = <0 1200000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk3_active

				 &cam_sensor_active_3>;

		pinctrl-1 = <&cam_sensor_mclk3_suspend

				 &cam_sensor_suspend_3>;

		gpios = <&tlmm 97 0>,

			<&tlmm 109 0>,

			<&pm8009_gpios 1 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK3",

					"CAM_RESET3",

					"TOF_VDD_EN";

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

};

arch/arm64/boot/dts/qcom/kona-camera-sensor-mtp.dtsi

+40 −0
Original line number Diff line number Diff line
@@ -280,5 +280,45 @@ 
		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor3 {

		cell-index = <3>;

		compatible = "qcom,cam-sensor";

		csiphy-sd-index = <3>;

		sensor-position-roll = <270>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		cam_vio-supply = <&pm8009_l7>;

		cam_vdig-supply = <&vreg_tof>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vio", "cam_vdig",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3600000 0>;

		rgltr-max-voltage = <0 3600000 0>;

		rgltr-load-current = <0 1200000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk3_active

				 &cam_sensor_active_3>;

		pinctrl-1 = <&cam_sensor_mclk3_suspend

				 &cam_sensor_suspend_3>;

		gpios = <&tlmm 97 0>,

			<&tlmm 109 0>,

			<&pm8009_gpios 1 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK3",

					"CAM_RESET3",

					"TOF_VDD_EN";

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

};