Merge branches 'exynos-fix', 'for-rc', 'int3403-fix', 'misc', 'rcar-thermal'...

* Renesas R-Car Thermal

Required properties:

- compatible		: "renesas,rcar-thermal"

- compatible		: "renesas,thermal-<soctype>", "renesas,rcar-thermal"

			  as fallback.

			  Examples with soctypes are:

			    - "renesas,thermal-r8a73a4" (R-Mobile AP6)

			    - "renesas,thermal-r8a7779" (R-Car H1)

			    - "renesas,thermal-r8a7790" (R-Car H2)

			    - "renesas,thermal-r8a7791" (R-Car M2)

- reg			: Address range of the thermal registers.

			  The 1st reg will be recognized as common register

			  if it has "interrupts".

Example (non interrupt support):

thermal@e61f0100 {

	compatible = "renesas,rcar-thermal";

	reg = <0xe61f0100 0x38>;

thermal@ffc48000 {

	compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";

	reg = <0xffc48000 0x38>;

};

Example (interrupt support):

thermal@e61f0000 {

	compatible = "renesas,rcar-thermal";

	compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";

	reg = <0xe61f0000 0x14

		0xe61f0100 0x38

		0xe61f0200 0x38

		0xe61f0300 0x38>;

	interrupts = <0 69 4>;

	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;

};

Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.

Required parameters:

-------------------

compatible : 	st,<SoC>-<module>-thermal; should be one of:

		  "st,stih415-sas-thermal",

		  "st,stih415-mpe-thermal",

		  "st,stih416-sas-thermal"

		  "st,stih416-mpe-thermal"

		  "st,stid127-thermal" or

		  "st,stih407-thermal"

		according to the SoC type (stih415, stih416, stid127, stih407)

		and module type (sas or mpe). On stid127 & stih407 there is only

		one die/module, so there is no module type in the compatible

		string.

clock-names : 	Should be "thermal".

		  See: Documentation/devicetree/bindings/resource-names.txt

clocks : 	Phandle of the clock used by the thermal sensor.

		  See: Documentation/devicetree/bindings/clock/clock-bindings.txt

Optional parameters:

-------------------

reg : 		For non-sysconf based sensors, this should be the physical base

		address and length of the sensor's registers.

interrupts :	Standard way to define interrupt number.

		Interrupt is mandatory to be defined when compatible is

		"stih416-mpe-thermal".

		  NB: For thermal sensor's for which no interrupt has been

		  defined, a polling delay of 1000ms will be used to read the

		  temperature from device.

Example:

	temp1@fdfe8000 {

		compatible	= "st,stih416-mpe-thermal";

		reg		= <0xfdfe8000 0x10>;

		clock-names	= "thermal";

		clocks		= <&clk_m_mpethsens>;

		interrupts	= <GIC_SPI 23 IRQ_TYPE_NONE>;

	};

config DOVE_THERMAL

	tristate "Temperature sensor on Marvell Dove SoCs"

	depends on ARCH_DOVE

	depends on ARCH_DOVE || MACH_DOVE

	depends on OF

	help

	  Support for the Dove thermal sensor driver in the Linux thermal

source "drivers/thermal/samsung/Kconfig"

endmenu

menu "STMicroelectronics thermal drivers"

depends on ARCH_STI && OF

source "drivers/thermal/st/Kconfig"

endmenu

endif

obj-$(CONFIG_INTEL_SOC_DTS_THERMAL)	+= intel_soc_dts_thermal.o

obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/

obj-$(CONFIG_ACPI_INT3403_THERMAL)	+= int3403_thermal.o

obj-$(CONFIG_ST_THERMAL)	+= st/

 * @event: value showing cpufreq event for which this function invoked.

 * @data: callback-specific data

 *

 * Callback to highjack the notification on cpufreq policy transition.

 * Callback to hijack the notification on cpufreq policy transition.

 * Every time there is a change in policy, we will intercept and

 * update the cpufreq policy with thermal constraints.

 *