Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 47c51431 authored by Jon Mason's avatar Jon Mason Committed by John W. Linville
Browse files

[PATCH] trivial: fix spelling errors in Kconfigs 



This patch corrects a few spelling and grammar errors found in
drivers/net

Signed-off-by: default avatarJon Mason <jdmason@us.ibm.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 23afaec4

drivers/net/Kconfig

+9 −9
Original line number Diff line number Diff line
@@ -66,7 +66,7 @@ config BONDING 
	  'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.



	  The driver supports multiple bonding modes to allow for both high

	  perfomance and high availability operation.

	  performance and high availability operation.



	  Refer to <file:Documentation/networking/bonding.txt> for more

	  information.
@@ -698,8 +698,8 @@ config VORTEX 
	depends on NET_VENDOR_3COM && (PCI || EISA)

	select MII

	---help---

	  This option enables driver support for a large number of 10mbps and

	  10/100mbps EISA, PCI and PCMCIA 3Com network cards:

	  This option enables driver support for a large number of 10Mbps and

	  10/100Mbps EISA, PCI and PCMCIA 3Com network cards:



	  "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI

	  "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
@@ -1021,7 +1021,7 @@ config EEXPRESS_PRO 
	depends on NET_ISA

	---help---

	  If you have a network (Ethernet) card of this type, say Y. This

	  driver supports intel i82595{FX,TX} based boards. Note however

	  driver supports Intel i82595{FX,TX} based boards. Note however

	  that the EtherExpress PRO/100 Ethernet card has its own separate

	  driver.  Please read the Ethernet-HOWTO, available from

	  <http://www.tldp.org/docs.html#howto>.
@@ -1207,7 +1207,7 @@ config IBM_EMAC_RX_SKB_HEADROOM 
	help

	  Additional receive skb headroom. Note, that driver

	  will always reserve at least 2 bytes to make IP header

	  aligned, so usualy there is no need to add any additional

	  aligned, so usually there is no need to add any additional

	  headroom.

	  

	  If unsure, set to 0.
@@ -1933,7 +1933,7 @@ config MYRI_SBUS 
	  will be called myri_sbus.  This is recommended.



config NS83820

	tristate "National Semiconduct DP83820 support"

	tristate "National Semiconductor DP83820 support"

	depends on PCI

	help

	  This is a driver for the National Semiconductor DP83820 series
@@ -2514,7 +2514,7 @@ config PPP_FILTER 
	  Say Y here if you want to be able to filter the packets passing over

	  PPP interfaces.  This allows you to control which packets count as

	  activity (i.e. which packets will reset the idle timer or bring up

	  a demand-dialled link) and which packets are to be dropped entirely.

	  a demand-dialed link) and which packets are to be dropped entirely.

	  You need to say Y here if you wish to use the pass-filter and

	  active-filter options to pppd.
@@ -2702,8 +2702,8 @@ config SHAPER 
	  <file:Documentation/networking/shaper.txt> for more information.



	  An alternative to this traffic shaper is the experimental

	  Class-Based Queueing (CBQ) scheduling support which you get if you

	  say Y to "QoS and/or fair queueing" above.

	  Class-Based Queuing (CBQ) scheduling support which you get if you

	  say Y to "QoS and/or fair queuing" above.



	  To compile this driver as a module, choose M here: the module

	  will be called shaper.  If unsure, say N.

drivers/net/arcnet/Kconfig

+2 −2
Original line number Diff line number Diff line
@@ -68,10 +68,10 @@ config ARCNET_CAP 
          packet is stuffed with an extra 4 byte "cookie" which doesn't

          actually appear on the network. After transmit the driver will send

          back a packet with protocol byte 0 containing the status of the

          transmition:

          transmission:

             0=no hardware acknowledge

             1=excessive nak

             2=transmition accepted by the reciever hardware

             2=transmission accepted by the receiver hardware



          Received packets are also stuffed with the extra 4 bytes but it will

          be random data.

drivers/net/irda/Kconfig

+2 −2
Original line number Diff line number Diff line
@@ -283,7 +283,7 @@ config USB_IRDA 
	  Say Y here if you want to build support for the USB IrDA FIR Dongle

	  device driver.  To compile it as a module, choose M here: the module

	  will be called irda-usb.  IrDA-USB support the various IrDA USB

	  dongles available and most of their pecularities.  Those dongles

	  dongles available and most of their peculiarities.  Those dongles

	  plug in the USB port of your computer, are plug and play, and

	  support SIR and FIR (4Mbps) speeds.  On the other hand, those

	  dongles tend to be less efficient than a FIR chipset.
@@ -360,7 +360,7 @@ config ALI_FIR 
	help

	  Say Y here if you want to build support for the ALi M5123 FIR

	  Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,

	  M1535, M1535D, M1535+, M1535D Sourth Bridge.  This driver supports

	  M1535, M1535D, M1535+, M1535D South Bridge.  This driver supports

	  SIR, MIR and FIR (4Mbps) speeds.



	  To compile it as a module, choose M here: the module will be called

drivers/net/wan/Kconfig

+1 −1
Original line number Diff line number Diff line
@@ -459,7 +459,7 @@ config WANPIPE_FR 
	bool "WANPIPE Frame Relay support"

	depends on VENDOR_SANGOMA

	help

	  Connect a WANPIPE card to a Frame Relay network, or use Frame Felay

	  Connect a WANPIPE card to a Frame Relay network, or use Frame Relay

	  API to develop custom applications.



	  Contains the Ethernet Bridging over Frame Relay feature, where

drivers/net/wireless/Kconfig

+3 −3
Original line number Diff line number Diff line
@@ -204,7 +204,7 @@ config IPW2200 
	  In order to use this driver, you will need a firmware image for it.

          You can obtain the firmware from

	  <http://ipw2200.sf.net/>.  See the above referenced README.ipw2200 

	  for information on where to install the firmare images.

	  for information on where to install the firmware images.



          You will also very likely need the Wireless Tools in order to

          configure your card:
@@ -262,7 +262,7 @@ config AIRO 
	  PCI 802.11 wireless cards.

	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X

	  - with or without encryption) as well as card before the Cisco

	  aquisition (Aironet 4500, Aironet 4800, Aironet 4800B).

	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).



	  This driver support both the standard Linux Wireless Extensions

	  and Cisco proprietary API, so both the Linux Wireless Tools and the
@@ -411,7 +411,7 @@ config AIRO_CS 
	  driver part of the Linux Pcmcia package.

	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X

	  - with or without encryption) as well as card before the Cisco

	  aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also

	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also

	  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom

	  802.11b cards.