Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 43c4d13e authored by Simon Budig's avatar Simon Budig Committed by Dmitry Torokhov
Browse files

Input: add driver for FT5x06 based EDT displays 



This is a driver for the EDT "Polytouch" family of touch controllers
based on the FocalTech FT5x06 line of chips.

Signed-off-by: default avatarSimon Budig <simon.budig@kernelconcepts.de>
Reviewed-by: default avatarHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 07b8481d

Documentation/input/edt-ft5x06.txt

0 → 100644
+54 −0
Original line number Original line Diff line number Diff line 
EDT ft5x06 based Polytouch devices

----------------------------------



The edt-ft5x06 driver is useful for the EDT "Polytouch" family of capacitive

touch screens. Note that it is *not* suitable for other devices based on the

focaltec ft5x06 devices, since they contain vendor-specific firmware. In

particular this driver is not suitable for the Nook tablet.



It has been tested with the following devices:

  * EP0350M06

  * EP0430M06

  * EP0570M06

  * EP0700M06



The driver allows configuration of the touch screen via a set of sysfs files:



/sys/class/input/eventX/device/device/threshold:

    allows setting the "click"-threshold in the range from 20 to 80.



/sys/class/input/eventX/device/device/gain:

    allows setting the sensitivity in the range from 0 to 31. Note that

    lower values indicate higher sensitivity.



/sys/class/input/eventX/device/device/offset:

    allows setting the edge compensation in the range from 0 to 31.



/sys/class/input/eventX/device/device/report_rate:

    allows setting the report rate in the range from 3 to 14.





For debugging purposes the driver provides a few files in the debug

filesystem (if available in the kernel). In /sys/kernel/debug/edt_ft5x06

you'll find the following files:



num_x, num_y:

    (readonly) contains the number of sensor fields in X- and

    Y-direction.



mode:

    allows switching the sensor between "factory mode" and "operation

    mode" by writing "1" or "0" to it. In factory mode (1) it is

    possible to get the raw data from the sensor. Note that in factory

    mode regular events don't get delivered and the options described

    above are unavailable.



raw_data:

    contains num_x * num_y big endian 16 bit values describing the raw

    values for each sensor field. Note that each read() call on this

    files triggers a new readout. It is recommended to provide a buffer

    big enough to contain num_x * num_y * 2 bytes.



Note that reading raw_data gives a I/O error when the device is not in factory

mode. The same happens when reading/writing to the parameter files when the

device is not in regular operation mode.

drivers/input/touchscreen/Kconfig

+13 −0
Original line number Original line Diff line number Diff line
@@ -472,6 +472,19 @@ config TOUCHSCREEN_PENMOUNT 
	  To compile this driver as a module, choose M here: the

	  To compile this driver as a module, choose M here: the

	  module will be called penmount.

	  module will be called penmount.





config TOUCHSCREEN_EDT_FT5X06

	tristate "EDT FocalTech FT5x06 I2C Touchscreen support"

	depends on I2C

	help

	  Say Y here if you have an EDT "Polytouch" touchscreen based

	  on the FocalTech FT5x06 family of controllers connected to

	  your system.



	  If unsure, say N.



	  To compile this driver as a module, choose M here: the

	  module will be called edt-ft5x06.



config TOUCHSCREEN_MIGOR

config TOUCHSCREEN_MIGOR

	tristate "Renesas MIGO-R touchscreen"

	tristate "Renesas MIGO-R touchscreen"

	depends on SH_MIGOR && I2C

	depends on SH_MIGOR && I2C

drivers/input/touchscreen/Makefile

+1 −0
Original line number Original line Diff line number Diff line
@@ -24,6 +24,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o 
obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o

obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o

obj-$(CONFIG_TOUCHSCREEN_DA9052)	+= da9052_tsi.o

obj-$(CONFIG_TOUCHSCREEN_DA9052)	+= da9052_tsi.o

obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o

obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o

obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06)	+= edt-ft5x06.o

obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o

obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o

obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o

obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o

obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o

obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o