Merge "ARM: dts: msm: fix soundcard enumeration for kona" (439e0739) · Commits · e / devices / android_kernel_fairphone_FP4

arch/arm64/boot/dts/qcom/kona-audio-overlay.dtsi

+24 −3

Original line number	Diff line number	Diff line
		@@ -182,8 +182,16 @@
		qcom,model = "kona-mtp-snd-card";
		qcom,msm-mi2s-master = <1>, <1>, <1>;
		qcom,audio-routing =
		"AMIC1", "MIC BIAS1",
		"MIC BIAS1", "Analog Mic1",
		"AMIC2", "MIC BIAS2",
		"MIC BIAS2", "Analog Mic2",
		"AMIC3", "MIC BIAS3",
		"MIC BIAS3", "Analog Mic3",
		"AMIC4", "MIC BIAS3",
		"MIC BIAS3", "Analog Mic4",
		"AMIC5", "MIC BIAS4",
		"MIC BIAS4", "Analog Mic5",
		"TX DMIC0", "MIC BIAS3",
		"MIC BIAS3", "Digital Mic0",
		"TX DMIC1", "MIC BIAS3",
		@@ -194,11 +202,15 @@
		"MIC BIAS1", "Digital Mic3",
		"TX DMIC4", "MIC BIAS4",
		"MIC BIAS4", "Digital Mic4",
		"TX DMIC5", "MIC BIAS4",
		"MIC BIAS4", "Digital Mic5",
		"IN1_HPHL", "HPHL_OUT",
		"IN2_HPHR", "HPHR_OUT",
		"IN3_AUX", "AUX_OUT",
		"TX SWR_ADC0", "ADC1_OUTPUT",
		"TX SWR_ADC2", "ADC2_OUTPUT",
		"TX SWR_ADC3", "ADC3_OUTPUT",
		"TX SWR_ADC4", "ADC4_OUTPUT",
		"TX SWR_DMIC0", "DMIC1_OUTPUT",
		"TX SWR_DMIC1", "DMIC2_OUTPUT",
		"TX SWR_DMIC2", "DMIC3_OUTPUT",
		@@ -229,7 +241,8 @@
		qcom,wsa-aux-dev-prefix = "SpkrLeft", "SpkrRight",
		"SpkrLeft", "SpkrRight";
		qcom,codec-aux-devs = <&wcd938x_codec>;
		qcom,msm_audio_ssr_devs = <&audio_apr>, <&q6core>, <&bolero>;
		qcom,msm_audio_ssr_devs = <&audio_apr>, <&q6core>, <&bolero>,
		<&lpi_tlmm>;
		};

		&soc {
		@@ -238,6 +251,7 @@
		pinctrl-names = "aud_active", "aud_sleep";
		pinctrl-0 = <&cdc_dmic01_clk_active &cdc_dmic01_data_active>;
		pinctrl-1 = <&cdc_dmic01_clk_sleep &cdc_dmic01_data_sleep>;
		qcom,lpi-gpios;
		};

		cdc_dmic23_gpios: cdc_dmic23_pinctrl {
		@@ -245,6 +259,7 @@
		pinctrl-names = "aud_active", "aud_sleep";
		pinctrl-0 = <&cdc_dmic23_clk_active &cdc_dmic23_data_active>;
		pinctrl-1 = <&cdc_dmic23_clk_sleep &cdc_dmic23_data_sleep>;
		qcom,lpi-gpios;
		};

		cdc_dmic45_gpios: cdc_dmic45_pinctrl {
		@@ -252,6 +267,7 @@
		pinctrl-names = "aud_active", "aud_sleep";
		pinctrl-0 = <&cdc_dmic45_clk_active &cdc_dmic45_data_active>;
		pinctrl-1 = <&cdc_dmic45_clk_sleep &cdc_dmic45_data_sleep>;
		qcom,lpi-gpios;
		};

		wsa_swr_gpios: wsa_swr_clk_data_pinctrl {
		@@ -259,13 +275,17 @@
		pinctrl-names = "aud_active", "aud_sleep";
		pinctrl-0 = <&wsa_swr_clk_active &wsa_swr_data_active>;
		pinctrl-1 = <&wsa_swr_clk_sleep &wsa_swr_data_sleep>;
		qcom,lpi-gpios;
		};

		rx_swr_gpios: rx_swr_clk_data_pinctrl {
		compatible = "qcom,msm-cdc-pinctrl";
		pinctrl-names = "aud_active", "aud_sleep";
		pinctrl-0 = <&rx_swr_clk_active &rx_swr_data_active>;
		pinctrl-1 = <&rx_swr_clk_sleep &rx_swr_data_sleep>;
		pinctrl-0 = <&rx_swr_clk_active &rx_swr_data_active
		&rx_swr_data1_active>;
		pinctrl-1 = <&rx_swr_clk_sleep &rx_swr_data_sleep
		&rx_swr_data1_sleep>;
		qcom,lpi-gpios;
		};

		tx_swr_gpios: tx_swr_clk_data_pinctrl {
		@@ -275,6 +295,7 @@
		&tx_swr_data2_active>;
		pinctrl-1 = <&tx_swr_clk_sleep &tx_swr_data1_sleep
		&tx_swr_data2_sleep>;
		qcom,lpi-gpios;
		};

		wsa_spkr_en1: wsa_spkr_en1_pinctrl {

arch/arm64/boot/dts/qcom/kona-audio.dtsi

+4 −3

Original line number	Diff line number	Diff line
		@@ -3,6 +3,7 @@
		* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
		*/

		#include "kona-lpi.dtsi"
		#include "msm-audio-lpass.dtsi"

		&msm_audio_ion {
		@@ -80,6 +81,7 @@
		<&incall_record_tx>, <&incall_music_rx>,
		<&incall_music_2_rx>,
		<&usb_audio_rx>, <&usb_audio_tx>,
		<&sb_7_rx>, <&sb_7_tx>,
		<&dai_pri_tdm_rx_0>, <&dai_pri_tdm_tx_0>,
		<&dai_sec_tdm_rx_0>, <&dai_sec_tdm_tx_0>,
		<&dai_tert_tdm_rx_0>, <&dai_tert_tdm_tx_0>,
		@@ -107,10 +109,9 @@
		"msm-dai-q6-dev.225", "msm-dai-q6-dev.241",
		"msm-dai-q6-dev.240", "msm-dai-q6-dev.32771",
		"msm-dai-q6-dev.32772", "msm-dai-q6-dev.32773",
		"msm-dai-q6-dev.32770", "msm-dai-q6-dev.16398",
		"msm-dai-q6-dev.16399", "msm-dai-q6-dev.16401",
		"msm-dai-q6-dev.16400",
		"msm-dai-q6-dev.32770",
		"msm-dai-q6-dev.28672", "msm-dai-q6-dev.28673",
		"msm-dai-q6-dev.16398", "msm-dai-q6-dev.16399",
		"msm-dai-q6-tdm.36864", "msm-dai-q6-tdm.36865",
		"msm-dai-q6-tdm.36880", "msm-dai-q6-tdm.36881",
		"msm-dai-q6-tdm.36896", "msm-dai-q6-tdm.36897",

arch/arm64/boot/dts/qcom/kona-cdp.dtsi

+12 −12

Original line number	Diff line number	Diff line
		@@ -296,18 +296,18 @@
		"MIC BIAS3", "Analog Mic4",
		"AMIC5", "MIC BIAS4",
		"MIC BIAS4", "Analog Mic5",
		"TX DMIC0", "MIC BIAS1",
		"MIC BIAS1", "Digital Mic0",
		"TX DMIC1", "MIC BIAS1",
		"MIC BIAS1", "Digital Mic1",
		"TX DMIC2", "MIC BIAS3",
		"MIC BIAS3", "Digital Mic2",
		"TX DMIC3", "MIC BIAS3",
		"MIC BIAS3", "Digital Mic3",
		"TX DMIC4", "MIC BIAS3",
		"MIC BIAS3", "Digital Mic4",
		"TX DMIC5", "MIC BIAS3",
		"MIC BIAS3", "Digital Mic5",
		"TX DMIC0", "MIC BIAS3",
		"MIC BIAS3", "Digital Mic0",
		"TX DMIC1", "MIC BIAS3",
		"MIC BIAS3", "Digital Mic1",
		"TX DMIC2", "MIC BIAS1",
		"MIC BIAS1", "Digital Mic2",
		"TX DMIC3", "MIC BIAS1",
		"MIC BIAS1", "Digital Mic3",
		"TX DMIC4", "MIC BIAS4",
		"MIC BIAS4", "Digital Mic4",
		"TX DMIC5", "MIC BIAS4",
		"MIC BIAS4", "Digital Mic5",
		"IN1_HPHL", "HPHL_OUT",
		"IN2_HPHR", "HPHR_OUT",
		"IN3_AUX", "AUX_OUT",

arch/arm64/boot/dts/qcom/kona-lpi.dtsi

0 → 100644

+1655 −0

File added.

Preview size limit exceeded, changes collapsed.

arch/arm64/boot/dts/qcom/kona-pinctrl.dtsi

+0 −348

Original line number	Diff line number	Diff line
		@@ -772,62 +772,6 @@
		};
		};

		wsa_swr_clk_pin {
		wsa_swr_clk_sleep: wsa_swr_clk_sleep {
		mux {
		pins = "gpio156";
		function = "WSA_CLK";
		};

		config {
		pins = "gpio156";
		drive-strength = <2>;
		bias-bus-hold;
		};
		};

		wsa_swr_clk_active: wsa_swr_clk_active {
		mux {
		pins = "gpio156";
		function = "WSA_CLK";
		};

		config {
		pins = "gpio156";
		drive-strength = <2>;
		bias-bus-hold;
		};
		};
		};

		wsa_swr_data_pin {
		wsa_swr_data_sleep: wsa_swr_data_sleep {
		mux {
		pins = "gpio157";
		function = "WSA_DATA";
		};

		config {
		pins = "gpio157";
		drive-strength = <4>;
		bias-bus-hold;
		};
		};

		wsa_swr_data_active: wsa_swr_data_active {
		mux {
		pins = "gpio157";
		function = "WSA_DATA";
		};

		config {
		pins = "gpio157";
		drive-strength = <4>;
		bias-bus-hold;
		};
		};
		};

		pri_aux_pcm_clk {
		pri_aux_pcm_clk_sleep: pri_aux_pcm_clk_sleep {
		mux {
		@@ -2024,298 +1968,6 @@
		};
		};

		cdc_dmic01_clk_active: dmic01_clk_active {
		mux {
		pins = "gpio152";
		function = "func1";
		};

		config {
		pins = "gpio152";
		drive-strength = <8>;
		output-high;
		};
		};

		cdc_dmic01_clk_sleep: dmic01_clk_sleep {
		mux {
		pins = "gpio152";
		function = "func1";
		};

		config {
		pins = "gpio152";
		drive-strength = <2>;
		bias-disable;
		output-low;
		};
		};

		cdc_dmic01_data_active: dmic01_data_active {
		mux {
		pins = "gpio153";
		function = "func1";
		};

		config {
		pins = "gpio153";
		drive-strength = <8>;
		input-enable;
		};
		};

		cdc_dmic01_data_sleep: dmic01_data_sleep {
		mux {
		pins = "gpio153";
		function = "func1";
		};

		config {
		pins = "gpio153";
		drive-strength = <2>;
		pull-down;
		input-enable;
		};
		};

		cdc_dmic23_clk_active: dmic23_clk_active {
		mux {
		pins = "gpio154";
		function = "func1";
		};

		config {
		pins = "gpio154";
		drive-strength = <8>;
		output-high;
		};
		};

		cdc_dmic23_clk_sleep: dmic23_clk_sleep {
		mux {
		pins = "gpio154";
		function = "func1";
		};

		config {
		pins = "gpio154";
		drive-strength = <2>;
		bias-disable;
		output-low;
		};
		};

		cdc_dmic23_data_active: dmic23_data_active {
		mux {
		pins = "gpio155";
		function = "func1";
		};

		config {
		pins = "gpio155";
		drive-strength = <8>;
		input-enable;
		};
		};

		cdc_dmic23_data_sleep: dmic23_data_sleep {
		mux {
		pins = "gpio155";
		function = "func1";
		};

		config {
		pins = "gpio155";
		drive-strength = <2>;
		pull-down;
		input-enable;
		};
		};

		cdc_dmic45_clk_active: dmic45_clk_active {
		mux {
		pins = "gpio158";
		function = "func1";
		};

		config {
		pins = "gpio158";
		drive-strength = <8>;
		output-high;
		};
		};

		cdc_dmic45_clk_sleep: dmic45_clk_sleep {
		mux {
		pins = "gpio158";
		function = "func1";
		};

		config {
		pins = "gpio158";
		drive-strength = <2>;
		bias-disable;
		output-low;
		};
		};

		cdc_dmic45_data_active: dmic45_data_active {
		mux {
		pins = "gpio159";
		function = "func1";
		};

		config {
		pins = "gpio159";
		drive-strength = <8>;
		input-enable;
		};
		};

		cdc_dmic45_data_sleep: dmic45_data_sleep {
		mux {
		pins = "gpio159";
		function = "func1";
		};

		config {
		pins = "gpio159";
		drive-strength = <2>;
		pull-down;
		input-enable;
		};
		};

		tx_swr_clk_sleep: tx_swr_clk_sleep {
		mux {
		pins = "gpio146";
		function = "func2";
		};

		config {
		pins = "gpio146";
		drive-strength = <2>;
		bias-bus-hold;
		};
		};

		tx_swr_clk_active: tx_swr_clk_active {
		mux {
		pins = "gpio146";
		function = "func2";
		};

		config {
		pins = "gpio146";
		drive-strength = <8>;
		bias-bus-hold;
		};
		};

		tx_swr_data1_sleep: tx_swr_data1_sleep {
		mux {
		pins = "gpio147";
		function = "func3";
		};

		config {
		pins = "gpio147";
		drive-strength = <2>;
		bias-bus-hold;
		};
		};

		tx_swr_data1_active: tx_swr_data1_active {
		mux {
		pins = "gpio147";
		function = "func3";
		};

		config {
		pins = "gpio147";
		drive-strength = <8>;
		bias-bus-hold;
		};
		};

		tx_swr_data2_sleep: tx_swr_data2_sleep {
		mux {
		pins = "gpio148";
		function = "func2";
		};

		config {
		pins = "gpio148";
		drive-strength = <2>;
		bias-bus-hold;
		};
		};

		tx_swr_data2_active: tx_swr_data2_active {
		mux {
		pins = "gpio148";
		function = "func2";
		};

		config {
		pins = "gpio148";
		drive-strength = <8>;
		bias-bus-hold;
		};
		};

		rx_swr_clk_sleep: rx_swr_clk_sleep {
		mux {
		pins = "gpio149";
		function = "func2";
		};

		config {
		pins = "gpio149";
		drive-strength = <2>;
		bias-bus-hold;
		};
		};

		rx_swr_clk_active: rx_swr_clk_active {
		mux {
		pins = "gpio149";
		function = "func2";
		};

		config {
		pins = "gpio149";
		drive-strength = <8>;
		bias-bus-hold;
		};
		};

		rx_swr_data_sleep: rx_swr_data_sleep {
		mux {
		pins = "gpio150", "gpio151";
		function = "func2";
		};

		config {
		pins = "gpio150", "gpio151";
		drive-strength = <2>;
		bias-bus-hold;
		};
		};

		rx_swr_data_active: rx_swr_data_active {
		mux {
		pins = "gpio150", "gpio151";
		function = "func2";
		};

		config {
		pins = "gpio150", "gpio151";
		drive-strength = <8>;
		bias-bus-hold;
		};
		};

		cam_sensor_mclk0_active: cam_sensor_mclk0_active {
		/* MCLK0 */
		mux {