Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 434b825e authored by Artem Bityutskiy's avatar Artem Bityutskiy
Browse files

UBI: print media information earlier 



Print information about logicale eraseblock size, sub-page
size and so on at early stage, befor an attempt to attach
the MTD device was made. This is more convenient to do so
because the attempt to attach may fail, and the information
is never printed then.

Signed-off-by: default avatarArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
parent 4bc1dca4

drivers/mtd/ubi/build.c

+10 −9
Original line number Original line Diff line number Diff line
@@ -606,8 +606,16 @@ static int io_init(struct ubi_device *ubi) 
		ubi->ro_mode = 1;

		ubi->ro_mode = 1;

	}

	}





	dbg_msg("leb_size         %d", ubi->leb_size);

	ubi_msg("physical eraseblock size:   %d bytes (%d KiB)",

	dbg_msg("ro_mode          %d", ubi->ro_mode);

		ubi->peb_size, ubi->peb_size >> 10);

	ubi_msg("logical eraseblock size:    %d bytes", ubi->leb_size);

	ubi_msg("smallest flash I/O unit:    %d", ubi->min_io_size);

	if (ubi->hdrs_min_io_size != ubi->min_io_size)

		ubi_msg("sub-page size:              %d",

			ubi->hdrs_min_io_size);

	ubi_msg("VID header offset:          %d (aligned %d)",

		ubi->vid_hdr_offset, ubi->vid_hdr_aloffset);

	ubi_msg("data offset:                %d", ubi->leb_start);





	/*

	/*

	 * Note, ideally, we have to initialize ubi->bad_peb_count here. But

	 * Note, ideally, we have to initialize ubi->bad_peb_count here. But
@@ -804,15 +812,8 @@ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset) 
	ubi_msg("attached mtd%d to ubi%d", mtd->index, ubi_num);

	ubi_msg("attached mtd%d to ubi%d", mtd->index, ubi_num);

	ubi_msg("MTD device name:            \"%s\"", mtd->name);

	ubi_msg("MTD device name:            \"%s\"", mtd->name);

	ubi_msg("MTD device size:            %llu MiB", ubi->flash_size >> 20);

	ubi_msg("MTD device size:            %llu MiB", ubi->flash_size >> 20);

	ubi_msg("physical eraseblock size:   %d bytes (%d KiB)",

		ubi->peb_size, ubi->peb_size >> 10);

	ubi_msg("logical eraseblock size:    %d bytes", ubi->leb_size);

	ubi_msg("number of good PEBs:        %d", ubi->good_peb_count);

	ubi_msg("number of good PEBs:        %d", ubi->good_peb_count);

	ubi_msg("number of bad PEBs:         %d", ubi->bad_peb_count);

	ubi_msg("number of bad PEBs:         %d", ubi->bad_peb_count);

	ubi_msg("smallest flash I/O unit:    %d", ubi->min_io_size);

	ubi_msg("VID header offset:          %d (aligned %d)",

		ubi->vid_hdr_offset, ubi->vid_hdr_aloffset);

	ubi_msg("data offset:                %d", ubi->leb_start);

	ubi_msg("max. allowed volumes:       %d", ubi->vtbl_slots);

	ubi_msg("max. allowed volumes:       %d", ubi->vtbl_slots);

	ubi_msg("wear-leveling threshold:    %d", CONFIG_MTD_UBI_WL_THRESHOLD);

	ubi_msg("wear-leveling threshold:    %d", CONFIG_MTD_UBI_WL_THRESHOLD);

	ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT);

	ubi_msg("number of internal volumes: %d", UBI_INT_VOL_COUNT);