Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 41950bdf authored by John W. Linville's avatar John W. Linville
Browse files

b43: silence most sparse warnings 



  CHECK   drivers/net/wireless/b43/main.c
drivers/net/wireless/b43/main.c:111:5: warning: symbol 'b43_modparam_pio' was not declared. Should it be static?
  CHECK   drivers/net/wireless/b43/phy_g.c
drivers/net/wireless/b43/phy_g.c:975:56: warning: cast truncates bits from constant value (ffff7fff becomes 7fff)
  CHECK   drivers/net/wireless/b43/phy_lp.c
drivers/net/wireless/b43/phy_lp.c:2701:6: warning: symbol 'b43_lpphy_op_switch_analog' was not declared. Should it be static?
drivers/net/wireless/b43/phy_lp.c:1148:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff)
drivers/net/wireless/b43/phy_lp.c:1525:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff)
drivers/net/wireless/b43/phy_lp.c:1529:30: warning: cast truncates bits from constant value (ffff1fff becomes 1fff)
  CHECK   drivers/net/wireless/b43/wa.c
drivers/net/wireless/b43/wa.c:385:60: warning: cast truncates bits from constant value (ffff00ff becomes ff)
drivers/net/wireless/b43/wa.c:403:55: warning: cast truncates bits from constant value (ffff00ff becomes ff)
drivers/net/wireless/b43/wa.c:405:55: warning: cast truncates bits from constant value (ffff00ff becomes ff)
drivers/net/wireless/b43/wa.c:415:71: warning: cast truncates bits from constant value (ffff0fff becomes fff)

AFAICT, none of these amount to real bugs.  But this reduces warning
spam from sparse w/o significantly affecting readability of the code (IMHO).

Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 8b74964c

drivers/net/wireless/b43/main.c

+1 −1
Original line number Diff line number Diff line
@@ -108,7 +108,7 @@ int b43_modparam_verbose = B43_VERBOSITY_DEFAULT; 
module_param_named(verbose, b43_modparam_verbose, int, 0644);

MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug");



int b43_modparam_pio = B43_PIO_DEFAULT;

static int b43_modparam_pio = B43_PIO_DEFAULT;

module_param_named(pio, b43_modparam_pio, int, 0644);

MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");

drivers/net/wireless/b43/phy_g.c

+1 −1
Original line number Diff line number Diff line
@@ -972,7 +972,7 @@ b43_radio_interference_mitigation_enable(struct b43_wldev *dev, int mode) 
		b43_phy_maskset(dev, 0x04A2, 0xFFF0, 0x000B);



		if (phy->rev >= 3) {

			b43_phy_mask(dev, 0x048A, (u16)~0x8000);

			b43_phy_mask(dev, 0x048A, 0x7FFF);

			b43_phy_maskset(dev, 0x0415, 0x8000, 0x36D8);

			b43_phy_maskset(dev, 0x0416, 0x8000, 0x36D8);

			b43_phy_maskset(dev, 0x0417, 0xFE00, 0x016D);

drivers/net/wireless/b43/phy_lp.c

+4 −4
Original line number Diff line number Diff line
@@ -1145,7 +1145,7 @@ static void lpphy_write_tx_pctl_mode_to_hardware(struct b43_wldev *dev) 
		B43_WARN_ON(1);

	}

	b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,

			(u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE, ctl);

			~B43_LPPHY_TX_PWR_CTL_CMD_MODE & 0xFFFF, ctl);

}



static void lpphy_set_tx_power_control(struct b43_wldev *dev,
@@ -1522,11 +1522,11 @@ static void lpphy_tx_pctl_init_hw(struct b43_wldev *dev) 
	b43_phy_mask(dev, B43_LPPHY_TX_PWR_CTL_DELTAPWR_LIMIT, 0xFF);

	b43_phy_write(dev, B43_LPPHY_TX_PWR_CTL_DELTAPWR_LIMIT, 0xA);

	b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,

			(u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE,

			~B43_LPPHY_TX_PWR_CTL_CMD_MODE & 0xFFFF,

			B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF);

	b43_phy_mask(dev, B43_LPPHY_TX_PWR_CTL_NNUM, 0xF8FF);

	b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD,

			(u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE,

			~B43_LPPHY_TX_PWR_CTL_CMD_MODE & 0xFFFF,

			B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW);



	if (dev->phy.rev < 2) {
@@ -2698,7 +2698,7 @@ static enum b43_txpwr_result b43_lpphy_op_recalc_txpower(struct b43_wldev *dev, 
	return B43_TXPWR_RES_DONE;

}



void b43_lpphy_op_switch_analog(struct b43_wldev *dev, bool on)

static void b43_lpphy_op_switch_analog(struct b43_wldev *dev, bool on)

{

       if (on) {

               b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xfff8);

drivers/net/wireless/b43/wa.c

+4 −4
Original line number Diff line number Diff line
@@ -382,7 +382,7 @@ static void b43_wa_altagc(struct b43_wldev *dev) 
		b43_ofdmtab_write16(dev, B43_OFDMTAB_AGC1, 3, 25);

	}



	b43_phy_maskset(dev, B43_PHY_CCKSHIFTBITS_WA, (u16)~0xFF00, 0x5700);

	b43_phy_maskset(dev, B43_PHY_CCKSHIFTBITS_WA, 0x00FF, 0x5700);

	b43_phy_maskset(dev, B43_PHY_OFDM(0x1A), ~0x007F, 0x000F);

	b43_phy_maskset(dev, B43_PHY_OFDM(0x1A), ~0x3F80, 0x2B80);

	b43_phy_maskset(dev, B43_PHY_ANTWRSETT, 0xF0FF, 0x0300);
@@ -400,9 +400,9 @@ static void b43_wa_altagc(struct b43_wldev *dev) 
	b43_phy_maskset(dev, B43_PHY_OFDM(0x89), ~0x00FF, 0x0020);

	b43_phy_maskset(dev, B43_PHY_OFDM(0x89), ~0x3F00, 0x0200);

	b43_phy_maskset(dev, B43_PHY_OFDM(0x82), ~0x00FF, 0x002E);

	b43_phy_maskset(dev, B43_PHY_OFDM(0x96), (u16)~0xFF00, 0x1A00);

	b43_phy_maskset(dev, B43_PHY_OFDM(0x96), 0x00FF, 0x1A00);

	b43_phy_maskset(dev, B43_PHY_OFDM(0x81), ~0x00FF, 0x0028);

	b43_phy_maskset(dev, B43_PHY_OFDM(0x81), (u16)~0xFF00, 0x2C00);

	b43_phy_maskset(dev, B43_PHY_OFDM(0x81), 0x00FF, 0x2C00);

	if (phy->rev == 1) {

		b43_phy_write(dev, B43_PHY_PEAK_COUNT, 0x092B);

		b43_phy_maskset(dev, B43_PHY_OFDM(0x1B), ~0x001E, 0x0002);
@@ -412,7 +412,7 @@ static void b43_wa_altagc(struct b43_wldev *dev) 
		b43_phy_maskset(dev, B43_PHY_LPFGAINCTL, ~0x000F, 0x0004);

		if (phy->rev >= 6) {

			b43_phy_write(dev, B43_PHY_OFDM(0x22), 0x287A);

			b43_phy_maskset(dev, B43_PHY_LPFGAINCTL, (u16)~0xF000, 0x3000);

			b43_phy_maskset(dev, B43_PHY_LPFGAINCTL, 0x0FFF, 0x3000);

		}

	}

	b43_phy_maskset(dev, B43_PHY_DIVSRCHIDX, 0x8080, 0x7874);