Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 3e71f6dd authored by Ron Mercer's avatar Ron Mercer Committed by Jeff Garzik
Browse files

qla3xxx: bugfix: Fixed jumbo frame handling for 3032 chip.



The scatter/gather lists were not being build correctly.  When
large frames spanned several buffers the chip would panic.

Signed-off-by: default avatarRon Mercer <ron.mercer@qlogic.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 97916330
Loading
Loading
Loading
Loading
+64 −35
Original line number Original line Diff line number Diff line
@@ -2122,11 +2122,13 @@ static void ql_hw_csum_setup(struct sk_buff *skb,


	if (ip) {
	if (ip) {
		if (ip->protocol == IPPROTO_TCP) {
		if (ip->protocol == IPPROTO_TCP) {
			mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_TC;
			mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_TC | 
			OB_3032MAC_IOCB_REQ_IC;
			mac_iocb_ptr->ip_hdr_off = offset;
			mac_iocb_ptr->ip_hdr_off = offset;
			mac_iocb_ptr->ip_hdr_len = ip->ihl;
			mac_iocb_ptr->ip_hdr_len = ip->ihl;
		} else if (ip->protocol == IPPROTO_UDP) {
		} else if (ip->protocol == IPPROTO_UDP) {
			mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_UC;
			mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_UC | 
			OB_3032MAC_IOCB_REQ_IC;
			mac_iocb_ptr->ip_hdr_off = offset;
			mac_iocb_ptr->ip_hdr_off = offset;
			mac_iocb_ptr->ip_hdr_len = ip->ihl;
			mac_iocb_ptr->ip_hdr_len = ip->ihl;
		}
		}
@@ -2134,51 +2136,29 @@ static void ql_hw_csum_setup(struct sk_buff *skb,
}
}


/*
/*
 * The difference between 3022 and 3032 sends:
 * Map the buffers for this transmit.  This will return
 * 3022 only supports a simple single segment transmission.
 * NETDEV_TX_BUSY or NETDEV_TX_OK based on success.
 * 3032 supports checksumming and scatter/gather lists (fragments).
 * The 3032 supports sglists by using the 3 addr/len pairs (ALP) 
 * in the IOCB plus a chain of outbound address lists (OAL) that 
 * each contain 5 ALPs.  The last ALP of the IOCB (3rd) or OAL (5th) 
 * will used to point to an OAL when more ALP entries are required.  
 * The IOCB is always the top of the chain followed by one or more 
 * OALs (when necessary).
 */
 */
static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
static int ql_send_map(struct ql3_adapter *qdev,
				struct ob_mac_iocb_req *mac_iocb_ptr,
				struct ql_tx_buf_cb *tx_cb,
				struct sk_buff *skb)
{
{
	struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
	struct ql_tx_buf_cb *tx_cb;
	u32 tot_len = skb->len;
	struct oal *oal;
	struct oal *oal;
	struct oal_entry *oal_entry;
	struct oal_entry *oal_entry;
	int len;
	int len = skb_headlen(skb);
	struct ob_mac_iocb_req *mac_iocb_ptr;
	u64 map;
	u64 map;
	int seg_cnt, seg = 0;
	int seg_cnt, seg = 0;
	int frag_cnt = (int)skb_shinfo(skb)->nr_frags;
	int frag_cnt = (int)skb_shinfo(skb)->nr_frags;


	if (unlikely(atomic_read(&qdev->tx_count) < 2)) {
		if (!netif_queue_stopped(ndev))
			netif_stop_queue(ndev);
		return NETDEV_TX_BUSY;
	}
	tx_cb = &qdev->tx_buf[qdev->req_producer_index] ;
	seg_cnt = tx_cb->seg_count = ql_get_seg_count((skb_shinfo(skb)->nr_frags));
	seg_cnt = tx_cb->seg_count = ql_get_seg_count((skb_shinfo(skb)->nr_frags));
	if(seg_cnt == -1) {
	if(seg_cnt == -1) {
		printk(KERN_ERR PFX"%s: invalid segment count!\n",__func__);
		printk(KERN_ERR PFX"%s: invalid segment count!\n",__func__);
		return NETDEV_TX_OK;
		return NETDEV_TX_BUSY;

	}
	}
	mac_iocb_ptr = tx_cb->queue_entry;
	/*
	mac_iocb_ptr->opcode = qdev->mac_ob_opcode;
	 * Map the skb buffer first.
	mac_iocb_ptr->flags |= qdev->mb_bit_mask;
	 */
	mac_iocb_ptr->transaction_id = qdev->req_producer_index;
	mac_iocb_ptr->data_len = cpu_to_le16((u16) tot_len);
	tx_cb->skb = skb;
	if (skb->ip_summed == CHECKSUM_PARTIAL)
		ql_hw_csum_setup(skb, mac_iocb_ptr);
	len = skb_headlen(skb);
	map = pci_map_single(qdev->pdev, skb->data, len, PCI_DMA_TODEVICE);
	map = pci_map_single(qdev->pdev, skb->data, len, PCI_DMA_TODEVICE);
	oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
	oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
	oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
	oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
@@ -2235,6 +2215,55 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
		oal_entry->len =
		oal_entry->len =
		    cpu_to_le32(le32_to_cpu(oal_entry->len) | OAL_LAST_ENTRY);
		    cpu_to_le32(le32_to_cpu(oal_entry->len) | OAL_LAST_ENTRY);
	}
	}
	return NETDEV_TX_OK;
}

/*
 * The difference between 3022 and 3032 sends:
 * 3022 only supports a simple single segment transmission.
 * 3032 supports checksumming and scatter/gather lists (fragments).
 * The 3032 supports sglists by using the 3 addr/len pairs (ALP) 
 * in the IOCB plus a chain of outbound address lists (OAL) that 
 * each contain 5 ALPs.  The last ALP of the IOCB (3rd) or OAL (5th) 
 * will used to point to an OAL when more ALP entries are required.  
 * The IOCB is always the top of the chain followed by one or more 
 * OALs (when necessary).
 */
static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
{
	struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
	struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
	struct ql_tx_buf_cb *tx_cb;
	u32 tot_len = skb->len;
	struct ob_mac_iocb_req *mac_iocb_ptr;

	if (unlikely(atomic_read(&qdev->tx_count) < 2)) {
		if (!netif_queue_stopped(ndev))
			netif_stop_queue(ndev);
		return NETDEV_TX_BUSY;
	}
	
	tx_cb = &qdev->tx_buf[qdev->req_producer_index] ;
	if((tx_cb->seg_count = ql_get_seg_count((skb_shinfo(skb)->nr_frags))) == -1) {
		printk(KERN_ERR PFX"%s: invalid segment count!\n",__func__);
		return NETDEV_TX_OK;
	}
	
	mac_iocb_ptr = tx_cb->queue_entry;
	mac_iocb_ptr->opcode = qdev->mac_ob_opcode;
	mac_iocb_ptr->flags = OB_MAC_IOCB_REQ_X;
	mac_iocb_ptr->flags |= qdev->mb_bit_mask;
	mac_iocb_ptr->transaction_id = qdev->req_producer_index;
	mac_iocb_ptr->data_len = cpu_to_le16((u16) tot_len);
	tx_cb->skb = skb;
	if (skb->ip_summed == CHECKSUM_PARTIAL)
		ql_hw_csum_setup(skb, mac_iocb_ptr);
	
	if(ql_send_map(qdev,mac_iocb_ptr,tx_cb,skb) != NETDEV_TX_OK) {
		printk(KERN_ERR PFX"%s: Could not map the segments!\n",__func__);
		return NETDEV_TX_BUSY;
	}
	
	wmb();
	wmb();
	qdev->req_producer_index++;
	qdev->req_producer_index++;
	if (qdev->req_producer_index == NUM_REQ_Q_ENTRIES)
	if (qdev->req_producer_index == NUM_REQ_Q_ENTRIES)
+0 −1
Original line number Original line Diff line number Diff line
@@ -1094,7 +1094,6 @@ struct oal_entry {
	u32 len;
	u32 len;
#define OAL_LAST_ENTRY   0x80000000	/* Last valid buffer in list. */
#define OAL_LAST_ENTRY   0x80000000	/* Last valid buffer in list. */
#define OAL_CONT_ENTRY   0x40000000	/* points to an OAL. (continuation) */
#define OAL_CONT_ENTRY   0x40000000	/* points to an OAL. (continuation) */
	u32 reserved;
};
};


struct oal {
struct oal {