Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 37634923 authored by Eugeniy Paltsev's avatar Eugeniy Paltsev Committed by Philipp Zabel
Browse files

ARC: reset: introduce AXS10x reset driver



ARC AXS10x boards support custom IP-block which allows to control
reset signals of selected peripherals. For example DW GMAC, etc...
This block is controlled via memory-mapped register (AKA CREG) which
represents up-to 32 reset lines. This regiter is self-clearing so we
don't need to deassert line after reset.

As of today only the following lines are used:
 - DW GMAC - line 5

Signed-off-by: default avatarEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
parent 2bd6bf03
Loading
Loading
Loading
Loading
+33 −0
Original line number Diff line number Diff line
Binding for the AXS10x reset controller

This binding describes the ARC AXS10x boards custom IP-block which allows
to control reset signals of selected peripherals. For example DW GMAC, etc...
This block is controlled via memory-mapped register (AKA CREG) which
represents up-to 32 reset lines.

As of today only the following lines are used:
 - DW GMAC - line 5

This binding uses the common reset binding[1].

[1] Documentation/devicetree/bindings/reset/reset.txt

Required properties:
- compatible: should be "snps,axs10x-reset".
- reg: should always contain pair address - length: for creg reset
  bits register.
- #reset-cells: from common reset binding; Should always be set to 1.

Example:
	reset: reset-controller@11220 {
		compatible = "snps,axs10x-reset";
		#reset-cells = <1>;
		reg = <0x11220 0x4>;
	};

Specifying reset lines connected to IP modules:
	ethernet@.... {
		....
		resets = <&reset 5>;
		....
	};
+6 −0
Original line number Diff line number Diff line
@@ -12883,6 +12883,12 @@ F: arch/arc/plat-axs10x
F:	arch/arc/boot/dts/ax*
F:	Documentation/devicetree/bindings/arc/axs10*

SYNOPSYS AXS10x RESET CONTROLLER DRIVER
M:	Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
S:	Supported
F:	drivers/reset/reset-axs10x.c
F:	Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt

SYNOPSYS DESIGNWARE DMAC DRIVER
M:	Viresh Kumar <vireshk@kernel.org>
M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+6 −0
Original line number Diff line number Diff line
@@ -28,6 +28,12 @@ config RESET_ATH79
	  This enables the ATH79 reset controller driver that supports the
	  AR71xx SoC reset controller.

config RESET_AXS10X
	bool "AXS10x Reset Driver" if COMPILE_TEST
	default ARC_PLAT_AXS10X
	help
	  This enables the reset controller driver for AXS10x.

config RESET_BERLIN
	bool "Berlin Reset Driver" if COMPILE_TEST
	default ARCH_BERLIN
+1 −0
Original line number Diff line number Diff line
@@ -4,6 +4,7 @@ obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
obj-$(CONFIG_RESET_AXS10X) += reset-axs10x.o
obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
obj-$(CONFIG_RESET_HSDK_V1) += reset-hsdk-v1.o
obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
+83 −0
Original line number Diff line number Diff line
/*
 * Copyright (C) 2017 Synopsys.
 *
 * Synopsys AXS10x reset driver.
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2. This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>

#define to_axs10x_rst(p)	container_of((p), struct axs10x_rst, rcdev)

#define AXS10X_MAX_RESETS	32

struct axs10x_rst {
	void __iomem			*regs_rst;
	spinlock_t			lock;
	struct reset_controller_dev	rcdev;
};

static int axs10x_reset_reset(struct reset_controller_dev *rcdev,
			      unsigned long id)
{
	struct axs10x_rst *rst = to_axs10x_rst(rcdev);
	unsigned long flags;

	spin_lock_irqsave(&rst->lock, flags);
	writel(BIT(id), rst->regs_rst);
	spin_unlock_irqrestore(&rst->lock, flags);

	return 0;
}

static const struct reset_control_ops axs10x_reset_ops = {
	.reset	= axs10x_reset_reset,
};

static int axs10x_reset_probe(struct platform_device *pdev)
{
	struct axs10x_rst *rst;
	struct resource *mem;

	rst = devm_kzalloc(&pdev->dev, sizeof(*rst), GFP_KERNEL);
	if (!rst)
		return -ENOMEM;

	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	rst->regs_rst = devm_ioremap_resource(&pdev->dev, mem);
	if (IS_ERR(rst->regs_rst))
		return PTR_ERR(rst->regs_rst);

	spin_lock_init(&rst->lock);

	rst->rcdev.owner = THIS_MODULE;
	rst->rcdev.ops = &axs10x_reset_ops;
	rst->rcdev.of_node = pdev->dev.of_node;
	rst->rcdev.nr_resets = AXS10X_MAX_RESETS;

	return devm_reset_controller_register(&pdev->dev, &rst->rcdev);
}

static const struct of_device_id axs10x_reset_dt_match[] = {
	{ .compatible = "snps,axs10x-reset" },
	{ },
};

static struct platform_driver axs10x_reset_driver = {
	.probe	= axs10x_reset_probe,
	.driver	= {
		.name = "axs10x-reset",
		.of_match_table = axs10x_reset_dt_match,
	},
};
builtin_platform_driver(axs10x_reset_driver);

MODULE_AUTHOR("Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>");
MODULE_DESCRIPTION("Synopsys AXS10x reset driver");
MODULE_LICENSE("GPL v2");