Merge "ASoC: wsa883x: Add support for wsa883x speaker amplifer" (360a45ba) · Commits · e / devices / android_kernel_fairphone_FP4

asoc/codecs/wsa883x/Android.mk

0 → 100644

+49 −0

Original line number	Diff line number	Diff line
		# Android makefile for audio kernel modules

		# Assume no targets will be supported

		# Check if this driver needs be built for current target
		ifeq ($(call is-board-platform,lahaina),true)
		AUDIO_SELECT := CONFIG_SND_SOC_LAHAINA=m
		endif

		AUDIO_CHIPSET := audio
		# Build/Package only in case of supported target
		ifeq ($(call is-board-platform-in-list,lahaina),true)

		LOCAL_PATH := $(call my-dir)

		# This makefile is only for DLKM
		ifneq ($(findstring vendor,$(LOCAL_PATH)),)

		ifneq ($(findstring opensource,$(LOCAL_PATH)),)
		AUDIO_BLD_DIR := $(shell pwd)/vendor/qcom/opensource/audio-kernel
		endif # opensource

		DLKM_DIR := $(TOP)/device/qcom/common/dlkm

		# Build audio.ko as $(AUDIO_CHIPSET)_audio.ko
		###########################################################
		# This is set once per LOCAL_PATH, not per (kernel) module
		KBUILD_OPTIONS := AUDIO_ROOT=$(AUDIO_BLD_DIR)

		# We are actually building audio.ko here, as per the
		# requirement we are specifying <chipset>_audio.ko as LOCAL_MODULE.
		# This means we need to rename the module to <chipset>_audio.ko
		# after audio.ko is built.
		KBUILD_OPTIONS += MODNAME=wsa883x_dlkm
		KBUILD_OPTIONS += BOARD_PLATFORM=$(TARGET_BOARD_PLATFORM)
		KBUILD_OPTIONS += $(AUDIO_SELECT)

		###########################################################
		include $(CLEAR_VARS)
		LOCAL_MODULE := $(AUDIO_CHIPSET)_wsa883x.ko
		LOCAL_MODULE_KBUILD_NAME := wsa883x_dlkm.ko
		LOCAL_MODULE_TAGS := optional
		LOCAL_MODULE_DEBUG_ENABLE := true
		LOCAL_MODULE_PATH := $(KERNEL_MODULES_OUT)
		include $(DLKM_DIR)/AndroidKernelModule.mk
		###########################################################

		endif # DLKM check
		endif # supported target check

asoc/codecs/wsa883x/Kbuild

0 → 100644

+103 −0

Original line number	Diff line number	Diff line
		# We can build either as part of a standalone Kernel build or as
		# an external module. Determine which mechanism is being used
		ifeq ($(MODNAME),)
		KERNEL_BUILD := 1
		else
		KERNEL_BUILD := 0
		endif

		ifeq ($(KERNEL_BUILD), 1)
		# These are configurable via Kconfig for kernel-based builds
		# Need to explicitly configure for Android-based builds
		AUDIO_BLD_DIR := $(shell pwd)/kernel/msm-4.19
		AUDIO_ROOT := $(AUDIO_BLD_DIR)/techpack/audio
		endif

		ifeq ($(KERNEL_BUILD), 0)
		ifeq ($(CONFIG_ARCH_LAHAINA), y)
		include $(AUDIO_ROOT)/config/lahainaauto.conf
		INCS += -include $(AUDIO_ROOT)/config/lahainaautoconf.h
		endif
		endif

		# As per target team, build is done as follows:
		# Defconfig : build with default flags
		# Slub : defconfig + CONFIG_SLUB_DEBUG := y +
		# CONFIG_SLUB_DEBUG_ON := y + CONFIG_PAGE_POISONING := y
		# Perf : Using appropriate msmXXXX-perf_defconfig
		#
		# Shipment builds (user variants) should not have any debug feature
		# enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds
		# are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since
		# there is no other way to identify defconfig builds, QTI internal
		# representation of perf builds (identified using the string 'perf'),
		# is used to identify if the build is a slub or defconfig one. This
		# way no critical debug feature will be enabled for perf and shipment
		# builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT
		# config.

		############ UAPI ############
		UAPI_DIR := uapi
		UAPI_INC := -I$(AUDIO_ROOT)/include/$(UAPI_DIR)

		############ COMMON ############
		COMMON_DIR := include
		COMMON_INC := -I$(AUDIO_ROOT)/$(COMMON_DIR)

		############ WSA883X ############

		# for WSA883X Codec
		ifdef CONFIG_SND_SOC_WSA883X
		WSA883X_OBJS += wsa883x.o
		WSA883X_OBJS += wsa883x-regmap.o
		WSA883X_OBJS += wsa883x-tables.o
		WSA883X_OBJS += wsa883x-temp-sensor.o
		endif

		LINUX_INC += -Iinclude/linux

		INCS += $(COMMON_INC) \
		$(UAPI_INC)

		EXTRA_CFLAGS += $(INCS)


		CDEFINES += -DANI_LITTLE_BYTE_ENDIAN \
		-DANI_LITTLE_BIT_ENDIAN \
		-DDOT11F_LITTLE_ENDIAN_HOST \
		-DANI_COMPILER_TYPE_GCC \
		-DANI_OS_TYPE_ANDROID=6 \
		-DPTT_SOCK_SVC_ENABLE \
		-Wall\
		-Werror\
		-D__linux__

		KBUILD_CPPFLAGS += $(CDEFINES)

		# Currently, for versions of gcc which support it, the kernel Makefile
		# is disabling the maybe-uninitialized warning. Re-enable it for the
		# AUDIO driver. Note that we must use EXTRA_CFLAGS here so that it
		# will override the kernel settings.
		ifeq ($(call cc-option-yn, -Wmaybe-uninitialized),y)
		EXTRA_CFLAGS += -Wmaybe-uninitialized
		endif
		#EXTRA_CFLAGS += -Wmissing-prototypes

		ifeq ($(call cc-option-yn, -Wheader-guard),y)
		EXTRA_CFLAGS += -Wheader-guard
		endif

		ifeq ($(KERNEL_BUILD), 0)
		KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/ipc/Module.symvers
		KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/dsp/Module.symvers
		KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/Module.symvers
		KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/Module.symvers
		KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/soc/Module.symvers
		endif

		# Module information used by KBuild framework
		obj-$(CONFIG_SND_SOC_WSA883X) += wsa883x_dlkm.o
		wsa883x_dlkm-y := $(WSA883X_OBJS)

		# inject some build related information
		DEFINES += -DBUILD_TIMESTAMP=\"$(shell date -u +'%Y-%m-%dT%H:%M:%SZ')\"

asoc/codecs/wsa883x/internal.h

0 → 100644

+113 −0

Original line number	Diff line number	Diff line
		/* SPDX-License-Identifier: GPL-2.0-only */
		/*
		* Copyright (c) 2019, The Linux Foundation. All rights reserved.
		*/

		#ifndef WSA883X_INTERNAL_H
		#define WSA883X_INTERNAL_H

		#include "wsa883x.h"
		#include "wsa883x-registers.h"

		#ifdef CONFIG_DEBUG_FS
		#include <linux/debugfs.h>
		#include <linux/uaccess.h>

		#define SWR_SLV_MAX_REG_ADDR 0x2009
		#define SWR_SLV_START_REG_ADDR 0x40
		#define SWR_SLV_MAX_BUF_LEN 20
		#define BYTES_PER_LINE 12
		#define SWR_SLV_RD_BUF_LEN 8
		#define SWR_SLV_WR_BUF_LEN 32
		#define SWR_SLV_MAX_DEVICES 2
		#endif /* CONFIG_DEBUG_FS */

		#define WSA883X_DRV_NAME "wsa883x-codec"
		#define WSA883X_NUM_RETRY 5

		#define WSA883X_VERSION_ENTRY_SIZE 27

		enum {
		G_18DB = 0,
		G_16P5DB,
		G_15DB,
		G_13P5DB,
		G_12DB,
		G_10P5DB,
		G_9DB,
		G_7P5DB,
		G_6DB,
		G_4P5DB,
		G_3DB,
		G_1P5DB,
		G_0DB,
		};

		enum {
		DISABLE = 0,
		ENABLE,
		};

		enum {
		SWR_DAC_PORT,
		SWR_COMP_PORT,
		SWR_BOOST_PORT,
		SWR_VISENSE_PORT,
		};

		struct swr_port {
		u8 port_id;
		u8 ch_mask;
		u32 ch_rate;
		u8 num_ch;
		u8 port_type;
		};

		enum {
		WSA883X_DEV_DOWN,
		WSA883X_DEV_UP,
		WSA883X_DEV_READY,
		};

		extern struct regmap_config wsa883x_regmap_config;

		/*
		* Private data Structure for wsa883x. All parameters related to
		* WSA883X codec needs to be defined here.
		*/
		struct wsa883x_priv {
		struct regmap *regmap;
		struct device *dev;
		struct swr_device *swr_slave;
		struct snd_soc_component *component;
		bool comp_enable;
		bool boost_enable;
		bool visense_enable;
		u8 pa_gain;
		struct swr_port port[WSA883X_MAX_SWR_PORTS];
		int pd_gpio;
		struct wsa883x_tz_priv tz_pdata;
		int bg_cnt;
		int clk_cnt;
		int version;
		struct mutex bg_lock;
		struct mutex res_lock;
		struct mutex temp_lock;
		struct snd_info_entry *entry;
		struct snd_info_entry *version_entry;
		int state;
		struct delayed_work ocp_ctl_work;
		struct device_node *wsa_rst_np;
		int pa_mute;
		#ifdef CONFIG_DEBUG_FS
		struct dentry *debugfs_dent;
		struct dentry *debugfs_peek;
		struct dentry *debugfs_poke;
		struct dentry *debugfs_reg_dump;
		unsigned int read_data;
		#endif
		};

		static int32_t wsa883x_resource_acquire(struct snd_soc_component *component,
		bool enable);
		#endif /* WSA883X_INTERNAL_H */

asoc/codecs/wsa883x/wsa883x-registers.h

0 → 100644

+376 −0

File added.

Preview size limit exceeded, changes collapsed.

asoc/codecs/wsa883x/wsa883x-regmap.c

0 → 100644

+393 −0

Original line number	Diff line number	Diff line
		// SPDX-License-Identifier: GPL-2.0-only
		/*
		* Copyright (c) 2015-2016, 2019, The Linux Foundation. All rights reserved.
		*/

		#include <linux/regmap.h>
		#include <linux/device.h>
		#include "wsa883x-registers.h"
		#include "wsa883x.h"

		extern const u8 wsa883x_reg_access[WSA883X_NUM_REGISTERS];

		static struct reg_default wsa883x_defaults[] = {
		{WSA883X_REF_CTRL, 0x6C},
		{WSA883X_TEST_CTL_0, 0x06},
		{WSA883X_BIAS_0, 0xD2},
		{WSA883X_OP_CTL, 0xE0},
		{WSA883X_IREF_CTL, 0x58},
		{WSA883X_ISENS_CTL, 0x47},
		{WSA883X_CLK_CTL, 0x87},
		{WSA883X_TEST_CTL_1, 0x00},
		{WSA883X_BIAS_1, 0x51},
		{WSA883X_ADC_CTL, 0x03},
		{WSA883X_DOUT_MSB, 0x00},
		{WSA883X_DOUT_LSB, 0x00},
		{WSA883X_VBAT_SNS, 0x00},
		{WSA883X_ITRIM_CODE, 0x1F},
		{WSA883X_EN, 0x00},
		{WSA883X_OVERRIDE1, 0x00},
		{WSA883X_OVERRIDE2, 0x08},
		{WSA883X_VSENSE1, 0xD3},
		{WSA883X_ISENSE1, 0xD4},
		{WSA883X_ISENSE2, 0x20},
		{WSA883X_ISENSE_CAL, 0x00},
		{WSA883X_MISC, 0x00},
		{WSA883X_ADC_0, 0x00},
		{WSA883X_ADC_1, 0x00},
		{WSA883X_ADC_2, 0x00},
		{WSA883X_ADC_3, 0x00},
		{WSA883X_ADC_4, 0x45},
		{WSA883X_ADC_5, 0x20},
		{WSA883X_ADC_6, 0x10},
		{WSA883X_ADC_7, 0x00},
		{WSA883X_STATUS, 0x00},
		{WSA883X_DAC_CTRL_REG, 0x41},
		{WSA883X_DAC_EN_DEBUG_REG, 0x00},
		{WSA883X_DAC_OPAMP_BIAS1_REG, 0x48},
		{WSA883X_DAC_OPAMP_BIAS2_REG, 0x48},
		{WSA883X_DAC_VCM_CTRL_REG, 0x0B},
		{WSA883X_DAC_VOLTAGE_CTRL_REG, 0x05},
		{WSA883X_ATEST1_REG, 0x00},
		{WSA883X_ATEST2_REG, 0x00},
		{WSA883X_SPKR_TOP_BIAS_REG1, 0x4A},
		{WSA883X_SPKR_TOP_BIAS_REG2, 0x65},
		{WSA883X_SPKR_TOP_BIAS_REG3, 0x55},
		{WSA883X_SPKR_TOP_BIAS_REG4, 0xA9},
		{WSA883X_SPKR_CLIP_DET_REG, 0x00},
		{WSA883X_SPKR_DRV_LF_BLK_EN, 0x0F},
		{WSA883X_SPKR_DRV_LF_EN, 0x0A},
		{WSA883X_SPKR_DRV_LF_MASK_DCC_CTL, 0x00},
		{WSA883X_SPKR_DRV_LF_MISC_CTL, 0x32},
		{WSA883X_SPKR_DRV_LF_REG_GAIN, 0x00},
		{WSA883X_SPKR_DRV_LF_OS_CAL_CTL1, 0x90},
		{WSA883X_SPKR_DRV_LF_OS_CAL_CTL, 0x00},
		{WSA883X_SPKR_PWM_CLK_CTL, 0x00},
		{WSA883X_SPKR_PDRV_HS_CTL, 0x50},
		{WSA883X_SPKR_PDRV_LS_CTL, 0x48},
		{WSA883X_SPKR_PWRSTG_DBG, 0x00},
		{WSA883X_SPKR_OCP_CTL, 0x00},
		{WSA883X_SPKR_BBM_CTL, 0x90},
		{WSA883X_PA_STATUS0, 0x00},
		{WSA883X_PA_STATUS1, 0x00},
		{WSA883X_PA_STATUS2, 0x00},
		{WSA883X_EN_CTRL, 0x54},
		{WSA883X_CURRENT_LIMIT, 0x90},
		{WSA883X_IBIAS1, 0x00},
		{WSA883X_IBIAS2, 0x00},
		{WSA883X_IBIAS3, 0x00},
		{WSA883X_LDO_PROG, 0x2A},
		{WSA883X_STABILITY_CTRL1, 0x8E},
		{WSA883X_STABILITY_CTRL2, 0x00},
		{WSA883X_PWRSTAGE_CTRL1, 0x00},
		{WSA883X_PWRSTAGE_CTRL2, 0x40},
		{WSA883X_UVLO, 0xE9},
		{WSA883X_SEQUENCE_CTRL, 0x11},
		{WSA883X_ZX_CTRL_1, 0xF0},
		{WSA883X_ZX_CTRL_2, 0x06},
		{WSA883X_MISC1, 0x02},
		{WSA883X_MISC2, 0x81},
		{WSA883X_GMAMP_SUP1, 0x84},
		{WSA883X_PWRSTAGE_CTRL3, 0x14},
		{WSA883X_PRSTAGE_CTRL4, 0x5F},
		{WSA883X_SPARE1, 0x00},
		{WSA883X_PON_CTL_0, 0xE3},
		{WSA883X_PON_CLT_1, 0x70},
		{WSA883X_PON_CTL_2, 0x00},
		{WSA883X_PON_CTL_3, 0x00},
		{WSA883X_PON_CTL_4, 0x00},
		{WSA883X_CKWD_CTL_0, 0x34},
		{WSA883X_CKWD_CTL_1, 0x80},
		{WSA883X_CKWD_CTL_2, 0x00},
		{WSA883X_CKSK_CTL_0, 0x0A},
		{WSA883X_TEST_0, 0x00},
		{WSA883X_TEST_1, 0x00},
		{WSA883X_STATUS_0, 0x00},
		{WSA883X_STATUS_1, 0x00},
		{WSA883X_PAGE_REGISTER, 0x00},
		{WSA883X_CHIP_ID0, 0x00},
		{WSA883X_CHIP_ID1, 0x00},
		{WSA883X_CHIP_ID2, 0x02},
		{WSA883X_CHIP_ID3, 0x02},
		{WSA883X_BUS_ID, 0x00},
		{WSA883X_CDC_RST_CTL, 0x01},
		{WSA883X_TOP_CLK_CFG, 0x00},
		{WSA883X_CDC_PATH_MODE, 0x00},
		{WSA883X_CDC_CLK_CTL, 0xFF},
		{WSA883X_SWR_RESET_EN, 0x00},
		{WSA883X_PA_FSM_CTL, 0x00},
		{WSA883X_PA_FSM_TIMER0, 0x80},
		{WSA883X_PA_FSM_TIMER1, 0x80},
		{WSA883X_PA_FSM_STA, 0x00},
		{WSA883X_PA_FSM_ERR_COND, 0x00},
		{WSA883X_PA_FSM_MSK, 0x00},
		{WSA883X_PA_FSM_BYP, 0x00},
		{WSA883X_TADC_VALUE_CTL, 0x03},
		{WSA883X_TEMP_DETECT_CTL, 0x01},
		{WSA883X_TEMP_MSB, 0x00},
		{WSA883X_TEMP_LSB, 0x00},
		{WSA883X_TEMP_CONFIG0, 0x00},
		{WSA883X_TEMP_CONFIG1, 0x00},
		{WSA883X_VBAT_ADC_FLT_CTL, 0x00},
		{WSA883X_VBAT_DIN_MSB, 0x00},
		{WSA883X_VBAT_DIN_LSB, 0x00},
		{WSA883X_VBAT_DOUT, 0x00},
		{WSA883X_SDM_PDM9_LSB, 0x00},
		{WSA883X_SDM_PDM9_MSB, 0x00},
		{WSA883X_CDC_RX_CTL, 0xFE},
		{WSA883X_CDC_SPK_DSM_A1_0, 0x00},
		{WSA883X_CDC_SPK_DSM_A1_1, 0x01},
		{WSA883X_CDC_SPK_DSM_A2_0, 0x96},
		{WSA883X_CDC_SPK_DSM_A2_1, 0x09},
		{WSA883X_CDC_SPK_DSM_A3_0, 0xAB},
		{WSA883X_CDC_SPK_DSM_A3_1, 0x05},
		{WSA883X_CDC_SPK_DSM_A4_0, 0x1C},
		{WSA883X_CDC_SPK_DSM_A4_1, 0x02},
		{WSA883X_CDC_SPK_DSM_A5_0, 0x17},
		{WSA883X_CDC_SPK_DSM_A5_1, 0x02},
		{WSA883X_CDC_SPK_DSM_A6_0, 0xAA},
		{WSA883X_CDC_SPK_DSM_A7_0, 0xE3},
		{WSA883X_CDC_SPK_DSM_C_0, 0x69},
		{WSA883X_CDC_SPK_DSM_C_1, 0x54},
		{WSA883X_CDC_SPK_DSM_C_2, 0x02},
		{WSA883X_CDC_SPK_DSM_C_3, 0x15},
		{WSA883X_CDC_SPK_DSM_R1, 0xA4},
		{WSA883X_CDC_SPK_DSM_R2, 0xB5},
		{WSA883X_CDC_SPK_DSM_R3, 0x86},
		{WSA883X_CDC_SPK_DSM_R4, 0x85},
		{WSA883X_CDC_SPK_DSM_R5, 0xAA},
		{WSA883X_CDC_SPK_DSM_R6, 0xE2},
		{WSA883X_CDC_SPK_DSM_R7, 0x62},
		{WSA883X_CDC_SPK_GAIN_PDM_0, 0x00},
		{WSA883X_CDC_SPK_GAIN_PDM_1, 0xFC},
		{WSA883X_CDC_SPK_GAIN_PDM_2, 0x05},
		{WSA883X_PDM_WD_CTL, 0x00},
		{WSA883X_DEM_BYPASS_DATA0, 0x00},
		{WSA883X_DEM_BYPASS_DATA1, 0x00},
		{WSA883X_DEM_BYPASS_DATA2, 0x00},
		{WSA883X_DEM_BYPASS_DATA3, 0x00},
		{WSA883X_WAVG_CTL, 0x06},
		{WSA883X_WAVG_LRA_PER_0, 0xD1},
		{WSA883X_WAVG_LRA_PER_1, 0x00},
		{WSA883X_WAVG_DELTA_THETA_0, 0xE6},
		{WSA883X_WAVG_DELTA_THETA_1, 0x04},
		{WSA883X_WAVG_DIRECT_AMP_0, 0x50},
		{WSA883X_WAVG_DIRECT_AMP_1, 0x00},
		{WSA883X_WAVG_PTRN_AMP0_0, 0x50},
		{WSA883X_WAVG_PTRN_AMP0_1, 0x00},
		{WSA883X_WAVG_PTRN_AMP1_0, 0x50},
		{WSA883X_WAVG_PTRN_AMP1_1, 0x00},
		{WSA883X_WAVG_PTRN_AMP2_0, 0x50},
		{WSA883X_WAVG_PTRN_AMP2_1, 0x00},
		{WSA883X_WAVG_PTRN_AMP3_0, 0x50},
		{WSA883X_WAVG_PTRN_AMP3_1, 0x00},
		{WSA883X_WAVG_PTRN_AMP4_0, 0x50},
		{WSA883X_WAVG_PTRN_AMP4_1, 0x00},
		{WSA883X_WAVG_PTRN_AMP5_0, 0x50},
		{WSA883X_WAVG_PTRN_AMP5_1, 0x00},
		{WSA883X_WAVG_PTRN_AMP6_0, 0x50},
		{WSA883X_WAVG_PTRN_AMP6_1, 0x00},
		{WSA883X_WAVG_PTRN_AMP7_0, 0x50},
		{WSA883X_WAVG_PTRN_AMP7_1, 0x00},
		{WSA883X_WAVG_PER_0_1, 0x88},
		{WSA883X_WAVG_PER_2_3, 0x88},
		{WSA883X_WAVG_PER_4_5, 0x88},
		{WSA883X_WAVG_PER_6_7, 0x88},
		{WSA883X_DRE_CTL_0, 0x30},
		{WSA883X_DRE_CTL_1, 0x20},
		{WSA883X_CLSH_CTL_0, 0x37},
		{WSA883X_CLSH_CTL_1, 0x81},
		{WSA883X_CLSH_V_HD_PA, 0x0F},
		{WSA883X_CLSH_V_PA_MIN, 0x00},
		{WSA883X_CLSH_OVRD_VAL, 0x00},
		{WSA883X_CLSH_HARD_MAX, 0xFF},
		{WSA883X_CLSH_SOFT_MAX, 0xFF},
		{WSA883X_CLSH_SIG_DP, 0x00},
		{WSA883X_TAGC_CTL, 0x10},
		{WSA883X_TAGC_TIME, 0x20},
		{WSA883X_TAGC_E2E_GAIN, 0x02},
		{WSA883X_TAGC_FORCE_VAL, 0x00},
		{WSA883X_VAGC_CTL, 0x00},
		{WSA883X_VAGC_TIME, 0x08},
		{WSA883X_VAGC_ATTN_LVL_1_2, 0x21},
		{WSA883X_VAGC_ATTN_LVL_3, 0x03},
		{WSA883X_INTR_MODE, 0x00},
		{WSA883X_INTR_MASK0, 0x1B},
		{WSA883X_INTR_MASK1, 0x03},
		{WSA883X_INTR_STATUS0, 0x00},
		{WSA883X_INTR_STATUS1, 0x00},
		{WSA883X_INTR_CLEAR0, 0x00},
		{WSA883X_INTR_CLEAR1, 0x03},
		{WSA883X_INTR_LEVEL0, 0x00},
		{WSA883X_INTR_LEVEL1, 0x03},
		{WSA883X_INTR_SET0, 0x00},
		{WSA883X_INTR_SET1, 0x03},
		{WSA883X_INTR_TEST0, 0x00},
		{WSA883X_INTR_TEST1, 0x03},
		{WSA883X_OTP_CTRL0, 0x00},
		{WSA883X_OTP_CTRL1, 0x00},
		{WSA883X_HDRIVE_CTL_GROUP1, 0x00},
		{WSA883X_PIN_CTL, 0x04},
		{WSA883X_PIN_CTL_OE, 0x00},
		{WSA883X_PIN_WDATA_IOPAD, 0x00},
		{WSA883X_PIN_STATUS, 0x00},
		{WSA883X_I2C_SLAVE_CTL, 0x00},
		{WSA883X_PDM_TEST_MODE, 0x00},
		{WSA883X_ATE_TEST_MODE, 0x00},
		{WSA883X_DRE_TEST, 0x00},
		{WSA883X_DIG_DEBUG_MODE, 0x00},
		{WSA883X_DIG_DEBUG_SEL, 0x00},
		{WSA883X_DIG_DEBUG_EN, 0x00},
		{WSA883X_SWR_HM_TEST0, 0x08},
		{WSA883X_SWR_HM_TEST1, 0x00},
		{WSA883X_SWR_PAD_CTL, 0x45},
		{WSA883X_TEMP_DETECT_DBG_CTL, 0x00},
		{WSA883X_TEMP_DEBUG_MSB, 0x00},
		{WSA883X_TEMP_DEBUG_LSB, 0x00},
		{WSA883X_SAMPLE_EDGE_SEL, 0x7F},
		{WSA883X_TEST_MODE_CTL, 0x00},
		{WSA883X_IOPAD_CTL, 0x00},
		{WSA883X_SPARE_0, 0x00},
		{WSA883X_SPARE_1, 0x00},
		{WSA883X_SPARE_2, 0x00},
		{WSA883X_SCODE, 0x00},
		{WSA883X_PAGE_REGISTER, 0x00},
		{WSA883X_OTP_REG_0, 0x01},
		{WSA883X_OTP_REG_1, 0xFF},
		{WSA883X_OTP_REG_2, 0xC0},
		{WSA883X_OTP_REG_3, 0xFF},
		{WSA883X_OTP_REG_4, 0xC0},
		{WSA883X_OTP_REG_5, 0xFF},
		{WSA883X_OTP_REG_6, 0xFF},
		{WSA883X_OTP_REG_7, 0xFF},
		{WSA883X_OTP_REG_8, 0xFF},
		{WSA883X_OTP_REG_9, 0xFF},
		{WSA883X_OTP_REG_10, 0xFF},
		{WSA883X_OTP_REG_11, 0xFF},
		{WSA883X_OTP_REG_12, 0xFF},
		{WSA883X_OTP_REG_13, 0xFF},
		{WSA883X_OTP_REG_14, 0xFF},
		{WSA883X_OTP_REG_15, 0xFF},
		{WSA883X_OTP_REG_16, 0xFF},
		{WSA883X_OTP_REG_17, 0xFF},
		{WSA883X_OTP_REG_18, 0xFF},
		{WSA883X_OTP_REG_19, 0xFF},
		{WSA883X_OTP_REG_20, 0xFF},
		{WSA883X_OTP_REG_21, 0xFF},
		{WSA883X_OTP_REG_22, 0xFF},
		{WSA883X_OTP_REG_23, 0xFF},
		{WSA883X_OTP_REG_24, 0x03},
		{WSA883X_OTP_REG_25, 0x01},
		{WSA883X_OTP_REG_26, 0x03},
		{WSA883X_OTP_REG_27, 0x11},
		{WSA883X_OTP_REG_28, 0x3F},
		{WSA883X_OTP_REG_29, 0x3F},
		{WSA883X_OTP_REG_30, 0x01},
		{WSA883X_OTP_REG_31, 0x01},
		{WSA883X_OTP_REG_SCODE, 0x00},
		{WSA883X_OTP_REG_63, 0x40},
		{WSA883X_EMEM_0, 0x00},
		{WSA883X_EMEM_1, 0x00},
		{WSA883X_EMEM_2, 0x00},
		{WSA883X_EMEM_3, 0x00},
		{WSA883X_EMEM_4, 0x00},
		{WSA883X_EMEM_5, 0x00},
		{WSA883X_EMEM_6, 0x00},
		{WSA883X_EMEM_7, 0x00},
		{WSA883X_EMEM_8, 0x00},
		{WSA883X_EMEM_9, 0x00},
		{WSA883X_EMEM_10, 0x00},
		{WSA883X_EMEM_11, 0x00},
		{WSA883X_EMEM_12, 0x00},
		{WSA883X_EMEM_13, 0x00},
		{WSA883X_EMEM_14, 0x00},
		{WSA883X_EMEM_15, 0x00},
		{WSA883X_EMEM_16, 0x00},
		{WSA883X_EMEM_17, 0x00},
		{WSA883X_EMEM_18, 0x00},
		{WSA883X_EMEM_19, 0x00},
		{WSA883X_EMEM_20, 0x00},
		{WSA883X_EMEM_21, 0x00},
		{WSA883X_EMEM_22, 0x00},
		{WSA883X_EMEM_23, 0x00},
		{WSA883X_EMEM_24, 0x00},
		{WSA883X_EMEM_25, 0x00},
		{WSA883X_EMEM_26, 0x00},
		{WSA883X_EMEM_27, 0x00},
		{WSA883X_EMEM_28, 0x00},
		{WSA883X_EMEM_29, 0x00},
		{WSA883X_EMEM_30, 0x00},
		{WSA883X_EMEM_31, 0x00},
		{WSA883X_EMEM_32, 0x00},
		{WSA883X_EMEM_33, 0x00},
		{WSA883X_EMEM_34, 0x00},
		{WSA883X_EMEM_35, 0x00},
		{WSA883X_EMEM_36, 0x00},
		{WSA883X_EMEM_37, 0x00},
		{WSA883X_EMEM_38, 0x00},
		{WSA883X_EMEM_39, 0x00},
		{WSA883X_EMEM_40, 0x00},
		{WSA883X_EMEM_41, 0x00},
		{WSA883X_EMEM_42, 0x00},
		{WSA883X_EMEM_43, 0x00},
		{WSA883X_EMEM_44, 0x00},
		{WSA883X_EMEM_45, 0x00},
		{WSA883X_EMEM_46, 0x00},
		{WSA883X_EMEM_47, 0x00},
		{WSA883X_EMEM_48, 0x00},
		{WSA883X_EMEM_49, 0x00},
		{WSA883X_EMEM_50, 0x00},
		{WSA883X_EMEM_51, 0x00},
		{WSA883X_EMEM_52, 0x00},
		{WSA883X_EMEM_53, 0x00},
		{WSA883X_EMEM_54, 0x00},
		{WSA883X_EMEM_55, 0x00},
		{WSA883X_EMEM_56, 0x00},
		{WSA883X_EMEM_57, 0x00},
		{WSA883X_EMEM_58, 0x00},
		{WSA883X_EMEM_59, 0x00},
		{WSA883X_EMEM_60, 0x00},
		{WSA883X_EMEM_61, 0x00},
		{WSA883X_EMEM_62, 0x00},
		{WSA883X_EMEM_63, 0x00},
		};

		static bool wsa883x_readable_register(struct device *dev, unsigned int reg)
		{
		if (reg <= WSA883X_BASE)
		return 0;

		return wsa883x_reg_access[WSA883X_REG(reg)] & RD_REG;
		}

		static bool wsa883x_writeable_register(struct device *dev, unsigned int reg)
		{
		if (reg <= WSA883X_BASE)
		return 0;

		return wsa883x_reg_access[WSA883X_REG(reg)] & WR_REG;
		}

		static bool wsa883x_volatile_register(struct device *dev, unsigned int reg)
		{
		if (reg <= WSA883X_BASE)
		return 0;

		return ((wsa883x_reg_access[WSA883X_REG(reg)] & RD_REG) &&
		!(wsa883x_reg_access[WSA883X_REG(reg)] & WR_REG));
		}

		struct regmap_config wsa881x_regmap_config = {
		.reg_bits = 16,
		.val_bits = 8,
		.cache_type = REGCACHE_RBTREE,
		.reg_defaults = wsa883x_defaults,
		.num_reg_defaults = ARRAY_SIZE(wsa883x_defaults),
		.max_register = WSA883X_MAX_REGISTER,
		.volatile_reg = wsa883x_volatile_register,
		.readable_reg = wsa883x_readable_register,
		.writeable_reg = wsa883x_writeable_register,
		.reg_format_endian = REGMAP_ENDIAN_NATIVE,
		.val_format_endian = REGMAP_ENDIAN_NATIVE,
		.can_multi_write = true,
		};