fw-api: CL 24952424 - update fw common interface files (35d97a9c) · Commits · e / devices / android_kernel_fairphone_FP4

fw/wmi_services.h

+1 −0

Original line number	Diff line number	Diff line
		@@ -643,6 +643,7 @@ typedef enum {
		WMI_SERVICE_RADAR_FLAGS_SUPPORT = 390, /* Indicates FW supports radar flags, such as full bandwidth need put to NOL */
		WMI_SERVICE_XPAN_SUPPORT = 391, /* Indicate FW support XPAN configuration */
		WMI_SERVICE_5GHZ_HI_RSSI_ROAM_SUPPORT = 392, /* Indicate FW supports High RSSI Roam from 5 GHz Band to 6 GHz Band */
		WMI_SERVICE_BOTH_PSD_EIRP_FOR_AP_SP_CLIENT_SP_SUPPORT = 393, /* Support for CTL regeneration where both PSD and EIRP will be sent in 6GHZ SET_TPC WMI for SP and SP_CLIENT power modes */

		WMI_MAX_EXT2_SERVICE

fw/wmi_tlv_defs.h

+5 −1

Original line number	Diff line number	Diff line
		@@ -1406,6 +1406,8 @@ typedef enum {
		WMITLV_TAG_STRUC_wmi_vdev_sched_mode_probe_req_fixed_param,
		WMITLV_TAG_STRUC_wmi_vdev_sched_mode_probe_resp_fixed_param,
		WMITLV_TAG_STRUC_wmi_vdev_stop_mlo_params,
		WMITLV_TAG_STRUC_wmi_vdev_ch_power_psd_info,
		WMITLV_TAG_STRUC_wmi_vdev_ch_power_eirp_info,
		} WMITLV_TAG_ID;
		/*
		* IMPORTANT: Please add _ALL_ WMI Commands Here.
		@@ -5083,7 +5085,9 @@ WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_GET_BIG_DATA_P2_CMDID);
		/* Vdev set TPC power */
		#define WMITLV_TABLE_WMI_VDEV_SET_TPC_POWER_CMDID(id,op,buf,len) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_STRUC_wmi_vdev_set_tpc_power_cmd_fixed_param, wmi_vdev_set_tpc_power_fixed_param, fixed_param, WMITLV_SIZE_FIX) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_vdev_ch_power_info, ch_pwr_info, WMITLV_SIZE_VAR)
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_vdev_ch_power_info, ch_pwr_info, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_vdev_ch_power_psd_info, ch_pwr_psd_info, WMITLV_SIZE_VAR) \
		WMITLV_ELEM(id,op,buf,len, WMITLV_TAG_ARRAY_STRUC, wmi_vdev_ch_power_eirp_info, ch_pwr_eirp_info, WMITLV_SIZE_VAR)
		WMITLV_CREATE_PARAM_STRUC(WMI_VDEV_SET_TPC_POWER_CMDID);

		/* Frame inject command */

fw/wmi_unified.h

+50 −7

Original line number	Diff line number	Diff line
		@@ -40576,14 +40576,45 @@ typedef struct {

		/*
		* This fixed_param TLV is followed by the below TLVs:
		* num_pwr_levels of wmi_vdev_set_tpc_power_atomic_fixed_param
		* For PSD power, it is the PSD/EIRP power of the frequency (20MHz chunks).
		* For non-psd power, the power values are for 20, 40, and till
		* BSS BW power levels.
		* The num_pwr_levels will be checked by sw how many elements present
		* in the variable-length array.
		*
		* wmi_vdev_set_tpc_power_atomic_fixed_param;
		* Based on power_type_6ghz sent in fixed param, the array TLVs
		* will be interpreted as described below:
		*
		* For power_type_6ghz - LPI and VLP power mode:
		* num_pwr_levels of wmi_vdev_ch_power_info
		* This array TLV will be filled based on psd_power field in
		* fixed param.
		* If psd_power = 1, TLV carries 20MHz sub-channel center frequency
		* and PSD-power values.
		* If psd_power = 0, TLV carries Cfreq and EIRP for all BWs
		* (<= current channel BSS BW).
		* wmi_vdev_ch_power_psd_info & wmi_vdev_ch_power_eirp_info are not used
		* for LPI and VLP power mode.
		*
		* For power_type_6ghz SP and SP_CLIENT power mode:
		* num_pwr_levels of wmi_vdev_ch_power_psd_info is filled as below
		* Holds BSS sub-channel center frequency and OOBE PSD-power values.
		* OOBE PSD values for AP and STA are filled in below manner:
		* AP case:
		* For example, DUT is operating in 160 MHz and pri20
		* lies in first sub-channel,
		* OOBE_PSD_20 \| MIN_OOBE_PSD_40 \| MIN_OOBE_PSD_80 \|
		* MIN_OOBE_PSD_80 \| MIN_OOBE_PSD_160 \| MIN_OOBE__PSD_160 \|
		* MIN_OOBE_PSD_160 \| MIN_OOBE_PSD_160
		* STA case:
		* For example,STA is operating in 160 MHz
		* OOBE_PSD_20 \| OOBE_PSD_20 \| OOBE_PSD_20 \| OOBE_PSD_20 \|
		* OOBE_PSD_20 \| OOBE_PSD_20 \| OOBE_PSD_20 \| OOBE_PSD_20
		*
		* num_pwr_levels of wmi_vdev_ch_power_eirp_info
		* Carries Cfreq and EIRP for all BWs (<= current channel BSS BW).
		* For both AP and STA, EIRP are filled in below manner:
		* Example: If operating BW is 160 MHz
		* EIRP_20 \| EIRP_40 \| EIRP_80 \| EIRP_160
		*
		* If the wmi_vdev_ch_power_psd_info or wmi_vdev_ch_power_eirp_info TLV
		* arrays are not both present, check for older TLV
		* (wmi_vdev_ch_power_info) as explained for LPI and VLP.
		*/
		} wmi_vdev_set_tpc_power_fixed_param;

		@@ -40593,6 +40624,18 @@ typedef struct {
		A_UINT32 tx_power; /* Unit: dBm, either PSD/EIRP power for this frequency or incremental for non-PSD BW */
		} wmi_vdev_ch_power_info;

		typedef struct {
		A_UINT32 tlv_header;
		A_UINT32 chan_cfreq; /* Channel center frequency (MHz) of all BSS Sub-channel */
		A_INT32 psd_power; /* Unit: dBm/MHz, OOBE PSD power of sub-channel */
		} wmi_vdev_ch_power_psd_info;

		typedef struct {
		A_UINT32 tlv_header;
		A_UINT32 chan_cfreq; /* Channel center frequency (MHz) for all BWs (<= current channel BSS BW) */
		A_INT32 eirp_power; /* Unit: dBm, EIRP power for all BWs (<= current channel BSS BW) */
		} wmi_vdev_ch_power_eirp_info;

		typedef struct {
		A_UINT32 tlv_header; /* TLV tag and len; tag equals wmi_txpower_query_cmd_fixed_param */
		A_UINT32 request_id; /* unique request ID to distinguish the command / event set */

fw/wmi_version.h

+1 −1

Original line number	Diff line number	Diff line
		@@ -37,7 +37,7 @@
		#define __WMI_VER_MINOR_ 0
		/** WMI revision number has to be incremented when there is a
		* change that may or may not break compatibility. */
		#define __WMI_REVISION_ 1401
		#define __WMI_REVISION_ 1402

		/** The Version Namespace should not be normally changed. Only
		* host and firmware of the same WMI namespace will work