Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 34cf7230 authored by harigovi's avatar harigovi
Browse files

ARM: dts: msm: add support for visionox amoled panel 

Add support for rm69299 visionox amoled video mode
panel on lito platform.

Change-Id: I35a0eedda6d0c8021f36b8fc50543b127ad4e302
parent fa0abf0c

qcom/dsi-panel-rm69299-visionox-fhd-plus-video.dtsi

0 → 100644
+64 −0
Original line number Original line Diff line number Diff line 
&mdss_mdp {

	dsi_rm69299_visionox_amoled_video:

		qcom,mdss_dsi_rm69299_visionox_amoled_video {

		qcom,mdss-dsi-panel-name =

		"rm69299 amoled fhd+ video mode dsi visionox panel";

		qcom,mdss-dsi-panel-type = "dsi_video_mode";

		qcom,dsi-ctrl-num = <0>;

		qcom,dsi-phy-num = <0>;



		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-h-sync-pulse = <0>;

		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-tx-eot-append;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-lp11-init;

		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

		qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;

		qcom,mdss-dsi-te-pin-select = <1>;

		qcom,mdss-dsi-wr-mem-start = <0x2c>;

		qcom,mdss-dsi-wr-mem-continue = <0x3c>;

		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-te-check-enable;

		qcom,mdss-dsi-te-using-te-pin;

		qcom,mdss-dsi-display-timings {

			timing@0 {

				qcom,mdss-dsi-panel-width = <1080>;

				qcom,mdss-dsi-panel-height = <2248>;

				qcom,mdss-dsi-h-front-porch = <26>;

				qcom,mdss-dsi-h-back-porch = <36>;

				qcom,mdss-dsi-h-pulse-width = <2>;

				qcom,mdss-dsi-h-sync-skew = <0>;

				qcom,mdss-dsi-v-back-porch = <4>;

				qcom,mdss-dsi-v-front-porch = <56>;

				qcom,mdss-dsi-v-pulse-width = <4>;

				qcom,mdss-dsi-panel-framerate = <60>;

				qcom,mdss-dsi-on-command = [

						39 01 00 00 00 00 02 FE 00

						39 01 00 00 00 00 02 C2 08

						39 01 00 00 00 00 02 35 00

						39 01 00 00 00 00 02 51 FF

						05 01 00 00 96 00 02 11 00

						05 01 00 00 32 00 02 29 00];

				qcom,mdss-dsi-off-command = [

						05 01 00 00 32 00 02 28 00

						05 01 00 00 96 00 02 10 00];

				qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

				qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

			};

		};

	};

};

qcom/lito-cdp.dtsi

+10 −0
Original line number Original line Diff line number Diff line
@@ -525,6 +525,16 @@ 
	qcom,platform-reset-gpio = <&pm8150l_gpios 3 0>;

	qcom,platform-reset-gpio = <&pm8150l_gpios 3 0>;

	qcom,platform-en-gpio = <&pm8150l_gpios 9 0>;

	qcom,platform-en-gpio = <&pm8150l_gpios 9 0>;

	qcom,platform-bklight-en-gpio = <&pm8150l_gpios 10 0>;

	qcom,platform-bklight-en-gpio = <&pm8150l_gpios 10 0>;



};



&dsi_rm69299_visionox_amoled_video {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <255>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-reset-gpio = <&pm8150l_gpios 3 0>;

};

};





&sde_dsi {

&sde_dsi {

qcom/lito-sde-display.dtsi

+13 −0
Original line number Original line Diff line number Diff line
@@ -18,6 +18,7 @@ 
#include "dsi-panel-sim-dualmipi-video.dtsi"

#include "dsi-panel-sim-dualmipi-video.dtsi"

#include "dsi-panel-sim-dualmipi-dsc375-cmd.dtsi"

#include "dsi-panel-sim-dualmipi-dsc375-cmd.dtsi"

#include "dsi-panel-sim-sec-hd-cmd.dtsi"

#include "dsi-panel-sim-sec-hd-cmd.dtsi"

#include "dsi-panel-rm69299-visionox-fhd-plus-video.dtsi"

#include <dt-bindings/clock/mdss-7nm-pll-clk.h>

#include <dt-bindings/clock/mdss-7nm-pll-clk.h>





&pm8150l_gpios {

&pm8150l_gpios {
@@ -196,6 +197,18 @@ 
	connectors = <&sde_wb &sde_dsi &sde_dsi1 &sde_dp &sde_rscc>;

	connectors = <&sde_wb &sde_dsi &sde_dsi1 &sde_dp &sde_rscc>;

};

};





&dsi_rm69299_visionox_amoled_video {

	qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";

	qcom,mdss-dsi-display-timings {

		timing@0 {

			qcom,mdss-dsi-panel-phy-timings = [00 20 08 08 24 23 08

							08 05 02 04 00 1a 18];

			qcom,display-topology = <1 0 1>;

			qcom,default-topology-index = <0>;

		};

	};

};



/* PHY TIMINGS REVISION W */

/* PHY TIMINGS REVISION W */

&dsi_sw43404_amoled_cmd {

&dsi_sw43404_amoled_cmd {

	qcom,ulps-enabled;

	qcom,ulps-enabled;