Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 2818fba1 authored by Alexander Beregalov's avatar Alexander Beregalov Committed by David S. Miller
Browse files

de620: convert PRINTK() to pr_debug() and cleanup 



Also remove DE620_DEBUG and de620_debug.

Signed-off-by: default avatarAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 64303258

drivers/net/de620.c

+18 −41
Original line number Diff line number Diff line
@@ -48,7 +48,6 @@ static const char version[] = 
 * Compile-time options: (see below for descriptions)

 * -DDE620_IO=0x378	(lpt1)

 * -DDE620_IRQ=7	(lpt1)

 * -DDE602_DEBUG=...

 * -DSHUTDOWN_WHEN_LOST

 * -DCOUNT_LOOPS

 * -DLOWSPEED
@@ -98,15 +97,6 @@ static const char version[] = 
#define SHUTDOWN_WHEN_LOST

 */



/*

 * Enable debugging by "-DDE620_DEBUG=3" when compiling,

 * OR by enabling the following #define

 *

 * use 0 for production, 1 for verification, >2 for debug

 *

#define DE620_DEBUG 3

 */



#ifdef LOWSPEED

/*

 * Enable this #define if you want to see debugging output that show how long
@@ -160,14 +150,6 @@ typedef unsigned char byte; 
#define RUNT 60		/* Too small Ethernet packet */

#define GIANT 1514	/* largest legal size packet, no fcs */



#ifdef DE620_DEBUG /* Compile-time configurable */

#define PRINTK(x) if (de620_debug >= 2) printk x

#else

#define DE620_DEBUG 0

#define PRINTK(x) /**/

#endif





/*

 * Force media with insmod:

 *	insmod de620.o bnc=1
@@ -186,8 +168,6 @@ static int io = DE620_IO; 
static int irq = DE620_IRQ;

static int clone = DE620_CLONE;



static unsigned int de620_debug = DE620_DEBUG;



static spinlock_t de620_lock;



module_param(bnc, int, 0);
@@ -195,13 +175,11 @@ module_param(utp, int, 0); 
module_param(io, int, 0);

module_param(irq, int, 0);

module_param(clone, int, 0);

module_param(de620_debug, int, 0);

MODULE_PARM_DESC(bnc, "DE-620 set BNC medium (0-1)");

MODULE_PARM_DESC(utp, "DE-620 set UTP medium (0-1)");

MODULE_PARM_DESC(io, "DE-620 I/O base address,required");

MODULE_PARM_DESC(irq, "DE-620 IRQ number,required");

MODULE_PARM_DESC(clone, "Check also for non-D-Link DE-620 clones (0-1)");

MODULE_PARM_DESC(de620_debug, "DE-620 debug level (0-2)");



/***********************************************

 *                                             *
@@ -534,8 +512,8 @@ static int de620_start_xmit(struct sk_buff *skb, struct net_device *dev) 
	/* Start real output */



	spin_lock_irqsave(&de620_lock, flags);

	PRINTK(("de620_start_xmit: len=%d, bufs 0x%02x\n",

		(int)skb->len, using_txbuf));

	pr_debug("de620_start_xmit: len=%d, bufs 0x%02x\n",

		(int)skb->len, using_txbuf);



	/* select a free tx buffer. if there is one... */

	switch (using_txbuf) {
@@ -585,12 +563,12 @@ de620_interrupt(int irq_in, void *dev_id) 
	/* Read the status register (_not_ the status port) */

	irq_status = de620_get_register(dev, R_STS);



	PRINTK(("de620_interrupt (%2.2X)\n", irq_status));

	pr_debug("de620_interrupt (%2.2X)\n", irq_status);



	if (irq_status & RXGOOD) {

		do {

			again = de620_rx_intr(dev);

			PRINTK(("again=%d\n", again));

			pr_debug("again=%d\n", again);

		}

		while (again && (++bogus_count < 100));

	}
@@ -622,7 +600,7 @@ static int de620_rx_intr(struct net_device *dev) 
	byte pagelink;

	byte curr_page;



	PRINTK(("de620_rx_intr: next_rx_page = %d\n", next_rx_page));

	pr_debug("de620_rx_intr: next_rx_page = %d\n", next_rx_page);



	/* Tell the adapter that we are going to read data, and from where */

	de620_send_command(dev, W_CR | RRN);
@@ -631,8 +609,9 @@ static int de620_rx_intr(struct net_device *dev) 


	/* Deep breath, and away we goooooo */

	de620_read_block(dev, (byte *)&header_buf, sizeof(struct header_buf));

	PRINTK(("page status=0x%02x, nextpage=%d, packetsize=%d\n",

	header_buf.status, header_buf.Rx_NextPage, header_buf.Rx_ByteCount));

	pr_debug("page status=0x%02x, nextpage=%d, packetsize=%d\n",

		header_buf.status, header_buf.Rx_NextPage,

		header_buf.Rx_ByteCount);



	/* Plausible page header? */

	pagelink = header_buf.Rx_NextPage;
@@ -683,7 +662,7 @@ static int de620_rx_intr(struct net_device *dev) 
			buffer = skb_put(skb,size);

			/* copy the packet into the buffer */

			de620_read_block(dev, buffer, size);

			PRINTK(("Read %d bytes\n", size));

			pr_debug("Read %d bytes\n", size);

			skb->protocol=eth_type_trans(skb,dev);

			netif_rx(skb); /* deliver it "upstairs" */

			/* count all receives */
@@ -696,7 +675,7 @@ static int de620_rx_intr(struct net_device *dev) 
	/* NOTE! We're _not_ checking the 'EMPTY'-flag! This seems better... */

	curr_page = de620_get_register(dev, R_CPR);

	de620_set_register(dev, W_NPRF, next_rx_page);

	PRINTK(("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page));

	pr_debug("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page);



	return (next_rx_page != curr_page); /* That was slightly tricky... */

}
@@ -830,8 +809,7 @@ struct net_device * __init de620_probe(int unit) 
		netdev_boot_setup_check(dev);

	}



	if (de620_debug)

		printk(version);

	pr_debug("%s", version);



	printk(KERN_INFO "D-Link DE-620 pocket adapter");
@@ -878,14 +856,13 @@ struct net_device * __init de620_probe(int unit) 
	/* base_addr and irq are already set, see above! */



	/* dump eeprom */

	if (de620_debug) {

		printk("\nEEPROM contents:\n");

		printk("RAM_Size = 0x%02X\n", nic_data.RAM_Size);

		printk("NodeID = %pM\n", nic_data.NodeID);

		printk("Model = %d\n", nic_data.Model);

		printk("Media = %d\n", nic_data.Media);

		printk("SCR = 0x%02x\n", nic_data.SCR);

	}

	pr_debug("\nEEPROM contents:\n"

		"RAM_Size = 0x%02X\n"

		"NodeID = %pM\n"

		"Model = %d\n"

		"Media = %d\n"

		"SCR = 0x%02x\n", nic_data.RAM_Size, nic_data.NodeID,

		nic_data.Model, nic_data.Media, nic_data.SCR);



	err = register_netdev(dev);

	if (err)