Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 2602a212 authored by Roy Zang's avatar Roy Zang Committed by Kumar Gala
Browse files

powerpc/85xx: Add basic P1023RDS board support 



The P1023 processor is an e500v2 based SoC that utilizes the DPAA
networking architecture.  This adds basic board support for non-DPAA
functionality (device tree, board file, etc).

Signed-off-by: default avatarRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: default avatarHaiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent 1325a684

arch/powerpc/boot/dts/p1023rds.dts

0 → 100644
+546 −0
Original line number Diff line number Diff line 
/*

 * P1023 RDS Device Tree Source

 *

 * Copyright 2010-2011 Freescale Semiconductor Inc.

 *

 * Author: Roy Zang <tie-fei.zang@freescale.com>

 *

 * Redistribution and use in source and binary forms, with or without

 * modification, are permitted provided that the following conditions are met:

 *     * Redistributions of source code must retain the above copyright

 *       notice, this list of conditions and the following disclaimer.

 *     * Redistributions in binary form must reproduce the above copyright

 *       notice, this list of conditions and the following disclaimer in the

 *       documentation and/or other materials provided with the distribution.

 *     * Neither the name of Freescale Semiconductor nor the

 *       names of its contributors may be used to endorse or promote products

 *       derived from this software without specific prior written permission.

 *

 *

 * ALTERNATIVELY, this software may be distributed under the terms of the

 * GNU General Public License ("GPL") as published by the Free Software

 * Foundation, either version 2 of that License or (at your option) any

 * later version.

 *

 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY

 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY

 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND

 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 */



/dts-v1/;



/ {

	model = "fsl,P1023";

	compatible = "fsl,P1023RDS";

	#address-cells = <2>;

	#size-cells = <2>;



	aliases {

		serial0 = &serial0;

		serial1 = &serial1;

		pci0 = &pci0;

		pci1 = &pci1;

		pci2 = &pci2;



		crypto = &crypto;

		sec_jr0 = &sec_jr0;

		sec_jr1 = &sec_jr1;

		sec_jr2 = &sec_jr2;

		sec_jr3 = &sec_jr3;

		rtic_a = &rtic_a;

		rtic_b = &rtic_b;

		rtic_c = &rtic_c;

		rtic_d = &rtic_d;

	};



	cpus {

		#address-cells = <1>;

		#size-cells = <0>;



		cpu0: PowerPC,P1023@0 {

			device_type = "cpu";

			reg = <0x0>;

			next-level-cache = <&L2>;

		};



		cpu1: PowerPC,P1023@1 {

			device_type = "cpu";

			reg = <0x1>;

			next-level-cache = <&L2>;

		};

	};



	memory {

		device_type = "memory";

	};



	soc@ff600000 {

		#address-cells = <1>;

		#size-cells = <1>;

		device_type = "soc";

		compatible = "fsl,p1023-immr", "simple-bus";

		ranges = <0x0 0x0 0xff600000 0x200000>;

		bus-frequency = <0>;		// Filled out by uboot.



		ecm-law@0 {

			compatible = "fsl,ecm-law";

			reg = <0x0 0x1000>;

			fsl,num-laws = <12>;

		};



		ecm@1000 {

			compatible = "fsl,p1023-ecm", "fsl,ecm";

			reg = <0x1000 0x1000>;

			interrupts = <16 2>;

			interrupt-parent = <&mpic>;

		};



		memory-controller@2000 {

			compatible = "fsl,p1023-memory-controller";

			reg = <0x2000 0x1000>;

			interrupt-parent = <&mpic>;

			interrupts = <16 2>;

		};



		i2c@3000 {

			#address-cells = <1>;

			#size-cells = <0>;

			cell-index = <0>;

			compatible = "fsl-i2c";

			reg = <0x3000 0x100>;

			interrupts = <43 2>;

			interrupt-parent = <&mpic>;

			dfsrr;

			rtc@68 {

				compatible = "dallas,ds1374";

				reg = <0x68>;

			};

		};



		i2c@3100 {

			#address-cells = <1>;

			#size-cells = <0>;

			cell-index = <1>;

			compatible = "fsl-i2c";

			reg = <0x3100 0x100>;

			interrupts = <43 2>;

			interrupt-parent = <&mpic>;

			dfsrr;

		};



		serial0: serial@4500 {

			cell-index = <0>;

			device_type = "serial";

			compatible = "ns16550";

			reg = <0x4500 0x100>;

			clock-frequency = <0>;

			interrupts = <42 2>;

			interrupt-parent = <&mpic>;

		};



		serial1: serial@4600 {

			cell-index = <1>;

			device_type = "serial";

			compatible = "ns16550";

			reg = <0x4600 0x100>;

			clock-frequency = <0>;

			interrupts = <42 2>;

			interrupt-parent = <&mpic>;

		};



		spi@7000 {

			cell-index = <0>;

			#address-cells = <1>;

			#size-cells = <0>;

			compatible = "fsl,p1023-espi", "fsl,mpc8536-espi";

			reg = <0x7000 0x1000>;

			interrupts = <59 0x2>;

			interrupt-parent = <&mpic>;

			fsl,espi-num-chipselects = <4>;



			fsl_dataflash@0 {

				#address-cells = <1>;

				#size-cells = <1>;

				compatible = "atmel,at45db081d";

				reg = <0>;

				spi-max-frequency = <40000000>; /* input clock */

				partition@u-boot {

					/* 512KB for u-boot Bootloader Image */

					label = "u-boot-spi";

					reg = <0x00000000 0x00080000>;

					read-only;

				};

				partition@dtb {

					/* 512KB for DTB Image */

					label = "dtb-spi";

					reg = <0x00080000 0x00080000>;

					read-only;

				};

			};

		};



		gpio: gpio-controller@f000 {

			#gpio-cells = <2>;

			compatible = "fsl,qoriq-gpio";

			reg = <0xf000 0x100>;

			interrupts = <47 0x2>;

			interrupt-parent = <&mpic>;

			gpio-controller;

		};



		L2: l2-cache-controller@20000 {

			compatible = "fsl,p1023-l2-cache-controller";

			reg = <0x20000 0x1000>;

			cache-line-size = <32>;	// 32 bytes

			cache-size = <0x40000>; // L2,256K

			interrupt-parent = <&mpic>;

			interrupts = <16 2>;

		};



		dma@21300 {

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "fsl,eloplus-dma";

			reg = <0x21300 0x4>;

			ranges = <0x0 0x21100 0x200>;

			cell-index = <0>;

			dma-channel@0 {

				compatible = "fsl,eloplus-dma-channel";

				reg = <0x0 0x80>;

				cell-index = <0>;

				interrupt-parent = <&mpic>;

				interrupts = <20 2>;

			};

			dma-channel@80 {

				compatible = "fsl,eloplus-dma-channel";

				reg = <0x80 0x80>;

				cell-index = <1>;

				interrupt-parent = <&mpic>;

				interrupts = <21 2>;

			};

			dma-channel@100 {

				compatible = "fsl,eloplus-dma-channel";

				reg = <0x100 0x80>;

				cell-index = <2>;

				interrupt-parent = <&mpic>;

				interrupts = <22 2>;

			};

			dma-channel@180 {

				compatible = "fsl,eloplus-dma-channel";

				reg = <0x180 0x80>;

				cell-index = <3>;

				interrupt-parent = <&mpic>;

				interrupts = <23 2>;

			};

		};



		usb@22000 {

			#address-cells = <1>;

			#size-cells = <0>;

			compatible = "fsl-usb2-dr";

			reg = <0x22000 0x1000>;

			interrupt-parent = <&mpic>;

			interrupts = <28 0x2>;

			dr_mode = "host";

			phy_type = "ulpi";

		};



		crypto: crypto@300000 {

			compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";

			#address-cells = <1>;

			#size-cells = <1>;

			reg = <0x30000 0x10000>;

			ranges = <0 0x30000 0x10000>;

			interrupt-parent = <&mpic>;

			interrupts = <58 2>;



			sec_jr0: jr@1000 {

				compatible = "fsl,sec-v4.2-job-ring",

					     "fsl,sec-v4.0-job-ring";

				reg = <0x1000 0x1000>;

				interrupts = <45 2>;

			};



			sec_jr1: jr@2000 {

				compatible = "fsl,sec-v4.2-job-ring",

					     "fsl,sec-v4.0-job-ring";

				reg = <0x2000 0x1000>;

				interrupts = <45 2>;

			};



			sec_jr2: jr@3000 {

				compatible = "fsl,sec-v4.2-job-ring",

					     "fsl,sec-v4.0-job-ring";

				reg = <0x3000 0x1000>;

				interrupts = <57 2>;

			};



			sec_jr3: jr@4000 {

				compatible = "fsl,sec-v4.2-job-ring",

					     "fsl,sec-v4.0-job-ring";

				reg = <0x4000 0x1000>;

				interrupts = <57 2>;

			};



			rtic@6000 {

				compatible = "fsl,sec-v4.2-rtic",

					     "fsl,sec-v4.0-rtic";

				#address-cells = <1>;

				#size-cells = <1>;

				reg = <0x6000 0x100>;

				ranges = <0x0 0x6100 0xe00>;



				rtic_a: rtic-a@0 {

					compatible = "fsl,sec-v4.2-rtic-memory",

						     "fsl,sec-v4.0-rtic-memory";

					reg = <0x00 0x20 0x100 0x80>;

				};



				rtic_b: rtic-b@20 {

					compatible = "fsl,sec-v4.2-rtic-memory",

						     "fsl,sec-v4.0-rtic-memory";

					reg = <0x20 0x20 0x200 0x80>;

				};



				rtic_c: rtic-c@40 {

					compatible = "fsl,sec-v4.2-rtic-memory",

						     "fsl,sec-v4.0-rtic-memory";

					reg = <0x40 0x20 0x300 0x80>;

				};



				rtic_d: rtic-d@60 {

					compatible = "fsl,sec-v4.2-rtic-memory",

						     "fsl,sec-v4.0-rtic-memory";

					reg = <0x60 0x20 0x500 0x80>;

				};

			};

		};



		power@e0070{

			compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc",

			             "fsl,p1022-pmc";

			reg = <0xe0070 0x20>;

			etsec1_clk: soc-clk@B0{

				fsl,pmcdr-mask = <0x00000080>;

			};

			etsec2_clk: soc-clk@B1{

				fsl,pmcdr-mask = <0x00000040>;

			};

			etsec3_clk: soc-clk@B2{

				fsl,pmcdr-mask = <0x00000020>;

			};

		};



		mpic: pic@40000 {

			interrupt-controller;

			#address-cells = <0>;

			#interrupt-cells = <2>;

			reg = <0x40000 0x40000>;

			compatible = "chrp,open-pic";

			device_type = "open-pic";

		};



		msi@41600 {

			compatible = "fsl,p1023-msi", "fsl,mpic-msi";

			reg = <0x41600 0x80>;

			msi-available-ranges = <0 0x100>;

			interrupts = <

				0xe0 0

				0xe1 0

				0xe2 0

				0xe3 0

				0xe4 0

				0xe5 0

				0xe6 0

				0xe7 0>;

			interrupt-parent = <&mpic>;

		};



		global-utilities@e0000 {	//global utilities block

			compatible = "fsl,p1023-guts";

			reg = <0xe0000 0x1000>;

			fsl,has-rstcr;

		};

	};



	localbus@ff605000 {

		#address-cells = <2>;

		#size-cells = <1>;

		compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";

		reg = <0 0xff605000 0 0x1000>;

		interrupts = <19 2>;

		interrupt-parent = <&mpic>;



		/* NOR Flash, BCSR */

		ranges = <0x0 0x0 0x0 0xee000000 0x02000000

			  0x1 0x0 0x0 0xe0000000 0x00008000>;



		nor@0,0 {

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "cfi-flash";

			reg = <0x0 0x0 0x02000000>;

			bank-width = <1>;

			device-width = <1>;

			partition@0 {

				label = "ramdisk";

				reg = <0x00000000 0x01c00000>;

			};

			partition@1c00000 {

				label = "kernel";

				reg = <0x01c00000 0x002e0000>;

			};

			partiton@1ee0000 {

				label = "dtb";

				reg = <0x01ee0000 0x00020000>;

			};

			partition@1f00000 {

				label = "firmware";

				reg = <0x01f00000 0x00080000>;

				read-only;

			};

			partition@1f80000 {

				label = "u-boot";

				reg = <0x01f80000 0x00080000>;

				read-only;

			};

		};



		fpga@1,0 {

			#address-cells = <1>;

			#size-cells = <1>;

			compatible = "fsl,p1023rds-fpga";

			reg = <1 0 0x8000>;

			ranges = <0 1 0 0x8000>;



			bcsr@20 {

				compatible = "fsl,p1023rds-bcsr";

				reg = <0x20 0x20>;

			};

		};

	};



	pci0: pcie@ff60a000 {

		compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";

		cell-index = <1>;

		device_type = "pci";

		#size-cells = <2>;

		#address-cells = <3>;

		reg = <0 0xff60a000 0 0x1000>;

		bus-range = <0 255>;

		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000

			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;

		clock-frequency = <33333333>;

		interrupt-parent = <&mpic>;

		interrupts = <16 2>;

		pcie@0 {

			reg = <0x0 0x0 0x0 0x0 0x0>;

			#interrupt-cells = <1>;

			#size-cells = <2>;

			#address-cells = <3>;

			device_type = "pci";

			interrupt-parent = <&mpic>;

			interrupts = <16 2>;

			interrupt-map-mask = <0xf800 0 0 7>;

			interrupt-map = <

				/* IDSEL 0x0 */

				0000 0 0 1 &mpic 0 1

				0000 0 0 2 &mpic 1 1

				0000 0 0 3 &mpic 2 1

				0000 0 0 4 &mpic 3 1

				>;

			ranges = <0x2000000 0x0 0xc0000000

				  0x2000000 0x0 0xc0000000

				  0x0 0x20000000



				  0x1000000 0x0 0x0

				  0x1000000 0x0 0x0

				  0x0 0x100000>;

		};

	};



	pci1: pcie@ff609000 {

		compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";

		cell-index = <2>;

		device_type = "pci";

		#size-cells = <2>;

		#address-cells = <3>;

		reg = <0 0xff609000 0 0x1000>;

		bus-range = <0 255>;

		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000

			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;

		clock-frequency = <33333333>;

		interrupt-parent = <&mpic>;

		interrupts = <16 2>;

		pcie@0 {

			reg = <0x0 0x0 0x0 0x0 0x0>;

			#interrupt-cells = <1>;

			#size-cells = <2>;

			#address-cells = <3>;

			device_type = "pci";

			interrupt-parent = <&mpic>;

			interrupts = <16 2>;

			interrupt-map-mask = <0xf800 0 0 7>;

			interrupt-map = <

				/* IDSEL 0x0 */

				0000 0 0 1 &mpic 4 1

				0000 0 0 2 &mpic 5 1

				0000 0 0 3 &mpic 6 1

				0000 0 0 4 &mpic 7 1

				>;

			ranges = <0x2000000 0x0 0xa0000000

				  0x2000000 0x0 0xa0000000

				  0x0 0x20000000



				  0x1000000 0x0 0x0

				  0x1000000 0x0 0x0

				  0x0 0x100000>;

		};

	};



	pci2: pcie@ff60b000 {

		cell-index = <3>;

		compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";

		device_type = "pci";

		#size-cells = <2>;

		#address-cells = <3>;

		reg = <0 0xff60b000 0 0x1000>;

		bus-range = <0 255>;

		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000

			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;

		clock-frequency = <33333333>;

		interrupt-parent = <&mpic>;

		interrupts = <16 2>;

		pcie@0 {

			reg = <0x0 0x0 0x0 0x0 0x0>;

			#interrupt-cells = <1>;

			#size-cells = <2>;

			#address-cells = <3>;

			device_type = "pci";

			interrupt-parent = <&mpic>;

			interrupts = <16 2>;

			interrupt-map-mask = <0xf800 0 0 7>;

			interrupt-map = <

				/* IDSEL 0x0 */

				0000 0 0 1 &mpic 8 1

				0000 0 0 2 &mpic 9 1

				0000 0 0 3 &mpic 10 1

				0000 0 0 4 &mpic 11 1

				>;

			ranges = <0x2000000 0x0 0x80000000

				  0x2000000 0x0 0x80000000

				  0x0 0x20000000



				  0x1000000 0x0 0x0

				  0x1000000 0x0 0x0

				  0x0 0x100000>;

		};

	};

};

arch/powerpc/configs/85xx/p1023rds_defconfig

0 → 100644
+173 −0
Original line number Diff line number Diff line 
CONFIG_PPC_85xx=y

CONFIG_SMP=y

CONFIG_NR_CPUS=2

CONFIG_EXPERIMENTAL=y

CONFIG_SYSVIPC=y

CONFIG_POSIX_MQUEUE=y

CONFIG_BSD_PROCESS_ACCT=y

CONFIG_AUDIT=y

CONFIG_SPARSE_IRQ=y

CONFIG_IKCONFIG=y

CONFIG_IKCONFIG_PROC=y

CONFIG_LOG_BUF_SHIFT=14

CONFIG_BLK_DEV_INITRD=y

# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

CONFIG_KALLSYMS_ALL=y

CONFIG_KALLSYMS_EXTRA_PASS=y

CONFIG_EMBEDDED=y

CONFIG_MODULES=y

CONFIG_MODULE_UNLOAD=y

CONFIG_MODULE_FORCE_UNLOAD=y

CONFIG_MODVERSIONS=y

# CONFIG_BLK_DEV_BSG is not set

CONFIG_P1023_RDS=y

CONFIG_QUICC_ENGINE=y

CONFIG_QE_GPIO=y

CONFIG_CPM2=y

CONFIG_MPC8xxx_GPIO=y

CONFIG_HIGHMEM=y

CONFIG_NO_HZ=y

CONFIG_HIGH_RES_TIMERS=y

# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set

CONFIG_BINFMT_MISC=m

CONFIG_MATH_EMULATION=y

CONFIG_SWIOTLB=y

CONFIG_PCI=y

CONFIG_PCIEPORTBUS=y

# CONFIG_PCIEAER is not set

# CONFIG_PCIEASPM is not set

CONFIG_PCI_MSI=y

CONFIG_NET=y

CONFIG_PACKET=y

CONFIG_UNIX=y

CONFIG_XFRM_USER=y

CONFIG_NET_KEY=y

CONFIG_INET=y

CONFIG_IP_MULTICAST=y

CONFIG_IP_ADVANCED_ROUTER=y

CONFIG_IP_MULTIPLE_TABLES=y

CONFIG_IP_ROUTE_MULTIPATH=y

CONFIG_IP_ROUTE_VERBOSE=y

CONFIG_IP_PNP=y

CONFIG_IP_PNP_DHCP=y

CONFIG_IP_PNP_BOOTP=y

CONFIG_IP_PNP_RARP=y

CONFIG_NET_IPIP=y

CONFIG_IP_MROUTE=y

CONFIG_IP_PIMSM_V1=y

CONFIG_IP_PIMSM_V2=y

CONFIG_ARPD=y

CONFIG_INET_ESP=y

# CONFIG_INET_XFRM_MODE_BEET is not set

# CONFIG_INET_LRO is not set

CONFIG_IPV6=y

CONFIG_IP_SCTP=m

CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"

CONFIG_PROC_DEVICETREE=y

CONFIG_BLK_DEV_LOOP=y

CONFIG_BLK_DEV_RAM=y

CONFIG_BLK_DEV_RAM_SIZE=131072

CONFIG_MISC_DEVICES=y

CONFIG_EEPROM_LEGACY=y

CONFIG_BLK_DEV_SD=y

CONFIG_CHR_DEV_ST=y

CONFIG_BLK_DEV_SR=y

CONFIG_CHR_DEV_SG=y

CONFIG_SCSI_MULTI_LUN=y

CONFIG_SCSI_LOGGING=y

CONFIG_ATA=y

CONFIG_SATA_FSL=y

CONFIG_SATA_SIL24=y

CONFIG_NETDEVICES=y

CONFIG_DUMMY=y

CONFIG_MARVELL_PHY=y

CONFIG_DAVICOM_PHY=y

CONFIG_CICADA_PHY=y

CONFIG_VITESSE_PHY=y

CONFIG_FIXED_PHY=y

CONFIG_NET_ETHERNET=y

CONFIG_FS_ENET=y

CONFIG_E1000E=y

CONFIG_FSL_PQ_MDIO=y

CONFIG_INPUT_FF_MEMLESS=m

# CONFIG_INPUT_MOUSEDEV is not set

# CONFIG_INPUT_KEYBOARD is not set

# CONFIG_INPUT_MOUSE is not set

CONFIG_SERIO_LIBPS2=y

CONFIG_SERIAL_8250=y

CONFIG_SERIAL_8250_CONSOLE=y

CONFIG_SERIAL_8250_NR_UARTS=2

CONFIG_SERIAL_8250_RUNTIME_UARTS=2

CONFIG_SERIAL_8250_EXTENDED=y

CONFIG_SERIAL_8250_MANY_PORTS=y

CONFIG_SERIAL_8250_DETECT_IRQ=y

CONFIG_SERIAL_8250_RSA=y

CONFIG_SERIAL_QE=m

CONFIG_HW_RANDOM=y

CONFIG_NVRAM=y

CONFIG_I2C=y

CONFIG_I2C_CPM=m

CONFIG_I2C_MPC=y

# CONFIG_HWMON is not set

CONFIG_VIDEO_OUTPUT_CONTROL=y

CONFIG_SOUND=y

CONFIG_SND=y

CONFIG_SND_MIXER_OSS=y

CONFIG_SND_PCM_OSS=y

# CONFIG_SND_SUPPORT_OLD_API is not set

CONFIG_EDAC=y

CONFIG_EDAC_MM_EDAC=y

CONFIG_RTC_CLASS=y

CONFIG_RTC_DRV_CMOS=y

CONFIG_DMADEVICES=y

CONFIG_FSL_DMA=y

# CONFIG_NET_DMA is not set

CONFIG_STAGING=y

# CONFIG_STAGING_EXCLUDE_BUILD is not set

CONFIG_EXT2_FS=y

CONFIG_EXT3_FS=y

# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

CONFIG_ISO9660_FS=m

CONFIG_JOLIET=y

CONFIG_ZISOFS=y

CONFIG_UDF_FS=m

CONFIG_MSDOS_FS=m

CONFIG_VFAT_FS=y

CONFIG_NTFS_FS=y

CONFIG_PROC_KCORE=y

CONFIG_TMPFS=y

CONFIG_ADFS_FS=m

CONFIG_AFFS_FS=m

CONFIG_HFS_FS=m

CONFIG_HFSPLUS_FS=m

CONFIG_BEFS_FS=m

CONFIG_BFS_FS=m

CONFIG_EFS_FS=m

CONFIG_CRAMFS=y

CONFIG_VXFS_FS=m

CONFIG_HPFS_FS=m

CONFIG_QNX4FS_FS=m

CONFIG_SYSV_FS=m

CONFIG_UFS_FS=m

CONFIG_NFS_FS=y

CONFIG_NFS_V3=y

CONFIG_NFS_V4=y

CONFIG_ROOT_NFS=y

CONFIG_NFSD=y

CONFIG_PARTITION_ADVANCED=y

CONFIG_MAC_PARTITION=y

CONFIG_CRC_T10DIF=y

CONFIG_FRAME_WARN=8092

CONFIG_DEBUG_FS=y

CONFIG_DEBUG_KERNEL=y

CONFIG_DETECT_HUNG_TASK=y

# CONFIG_DEBUG_BUGVERBOSE is not set

CONFIG_DEBUG_INFO=y

# CONFIG_RCU_CPU_STALL_DETECTOR is not set

CONFIG_SYSCTL_SYSCALL_CHECK=y

CONFIG_VIRQ_DEBUG=y

CONFIG_CRYPTO_PCBC=m

CONFIG_CRYPTO_SHA256=y

CONFIG_CRYPTO_SHA512=y

CONFIG_CRYPTO_AES=y

# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/powerpc/configs/mpc85xx_defconfig

+2 −5
Original line number Diff line number Diff line
@@ -5,6 +5,7 @@ CONFIG_SYSVIPC=y 
CONFIG_POSIX_MQUEUE=y

CONFIG_BSD_PROCESS_ACCT=y

CONFIG_AUDIT=y

CONFIG_SPARSE_IRQ=y

CONFIG_IKCONFIG=y

CONFIG_IKCONFIG_PROC=y

CONFIG_LOG_BUF_SHIFT=14
@@ -26,6 +27,7 @@ CONFIG_MPC8536_DS=y 
CONFIG_MPC85xx_DS=y

CONFIG_MPC85xx_RDB=y

CONFIG_P1022_DS=y

CONFIG_P1023_RDS=y

CONFIG_SOCRATES=y

CONFIG_KSI8560=y

CONFIG_XES_MPC85xx=y
@@ -44,7 +46,6 @@ CONFIG_NO_HZ=y 
CONFIG_HIGH_RES_TIMERS=y

CONFIG_BINFMT_MISC=m

CONFIG_MATH_EMULATION=y

CONFIG_SPARSE_IRQ=y

CONFIG_FORCE_MAX_ZONEORDER=12

CONFIG_PCI=y

CONFIG_PCI_MSI=y
@@ -65,8 +66,6 @@ CONFIG_IP_PNP_DHCP=y 
CONFIG_IP_PNP_BOOTP=y

CONFIG_IP_PNP_RARP=y

CONFIG_NET_IPIP=y

CONFIG_NET_IPGRE=y

CONFIG_NET_IPGRE_BROADCAST=y

CONFIG_IP_MROUTE=y

CONFIG_IP_PIMSM_V1=y

CONFIG_IP_PIMSM_V2=y
@@ -170,7 +169,6 @@ CONFIG_FSL_DMA=y 
CONFIG_EXT2_FS=y

CONFIG_EXT3_FS=y

# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

CONFIG_INOTIFY=y

CONFIG_ISO9660_FS=m

CONFIG_JOLIET=y

CONFIG_ZISOFS=y
@@ -205,7 +203,6 @@ CONFIG_DEBUG_FS=y 
CONFIG_DEBUG_KERNEL=y

CONFIG_DETECT_HUNG_TASK=y

CONFIG_DEBUG_INFO=y

# CONFIG_RCU_CPU_STALL_DETECTOR is not set

CONFIG_SYSCTL_SYSCALL_CHECK=y

CONFIG_VIRQ_DEBUG=y

CONFIG_CRYPTO_PCBC=m

arch/powerpc/configs/mpc85xx_smp_defconfig

+2 −4
Original line number Diff line number Diff line
@@ -7,6 +7,7 @@ CONFIG_SYSVIPC=y 
CONFIG_POSIX_MQUEUE=y

CONFIG_BSD_PROCESS_ACCT=y

CONFIG_AUDIT=y

CONFIG_SPARSE_IRQ=y

CONFIG_IKCONFIG=y

CONFIG_IKCONFIG_PROC=y

CONFIG_LOG_BUF_SHIFT=14
@@ -28,6 +29,7 @@ CONFIG_MPC8536_DS=y 
CONFIG_MPC85xx_DS=y

CONFIG_MPC85xx_RDB=y

CONFIG_P1022_DS=y

CONFIG_P1023_RDS=y

CONFIG_SOCRATES=y

CONFIG_KSI8560=y

CONFIG_XES_MPC85xx=y
@@ -46,7 +48,6 @@ CONFIG_NO_HZ=y 
CONFIG_HIGH_RES_TIMERS=y

CONFIG_BINFMT_MISC=m

CONFIG_MATH_EMULATION=y

CONFIG_SPARSE_IRQ=y

CONFIG_FORCE_MAX_ZONEORDER=12

CONFIG_PCI=y

CONFIG_PCI_MSI=y
@@ -67,8 +68,6 @@ CONFIG_IP_PNP_DHCP=y 
CONFIG_IP_PNP_BOOTP=y

CONFIG_IP_PNP_RARP=y

CONFIG_NET_IPIP=y

CONFIG_NET_IPGRE=y

CONFIG_NET_IPGRE_BROADCAST=y

CONFIG_IP_MROUTE=y

CONFIG_IP_PIMSM_V1=y

CONFIG_IP_PIMSM_V2=y
@@ -172,7 +171,6 @@ CONFIG_FSL_DMA=y 
CONFIG_EXT2_FS=y

CONFIG_EXT3_FS=y

# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

CONFIG_INOTIFY=y

CONFIG_ISO9660_FS=m

CONFIG_JOLIET=y

CONFIG_ZISOFS=y

arch/powerpc/platforms/85xx/Kconfig

+6 −0
Original line number Diff line number Diff line
@@ -75,6 +75,12 @@ config P1022_DS 
	help

	  This option enables support for the Freescale P1022DS reference board.



config P1023_RDS

	bool "Freescale P1023 RDS"

	select DEFAULT_UIMAGE

	help

	  This option enables support for the P1023 RDS board



config SOCRATES

	bool "Socrates"

	select DEFAULT_UIMAGE