Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 253ed684 authored by Ioana Ciornei's avatar Ioana Ciornei Committed by Greg Kroah-Hartman
Browse files

staging: iio: adc: remove multiple blank lines 



Remove multiple blank lines since there is no practical reason
to have it

Signed-off-by: default avatarIoana Ciornei <ciorneiioana@gmail.com>
Reviewed-by: default avatarDaniel Baluta <daniel.baluta@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 779c123e

drivers/staging/iio/adc/ad7192.c

+0 −1
Original line number Diff line number Diff line
@@ -88,7 +88,6 @@ 
#define AD7192_CLK_INT_CO		3 /* Internal 4.92 MHz Clock available

					   * at the MCLK2 pin */





/* Configuration Register Bit Designations (AD7192_REG_CONF) */



#define AD7192_CONF_CHOP	BIT(23) /* CHOP enable */

drivers/staging/iio/adc/ad7280a.c

+0 −1
Original line number Diff line number Diff line
@@ -769,7 +769,6 @@ static IIO_DEVICE_ATTR(in_temp_thresh_high_value, 
		ad7280_write_channel_config,

		AD7280A_AUX_ADC_OVERVOLTAGE);





static struct attribute *ad7280_event_attributes[] = {

	&iio_dev_attr_in_thresh_low_value.dev_attr.attr,

	&iio_dev_attr_in_thresh_high_value.dev_attr.attr,

drivers/staging/iio/adc/ad7780.c

+0 −1
Original line number Diff line number Diff line
@@ -206,7 +206,6 @@ static int ad7780_probe(struct spi_device *spi) 
	indio_dev->info = &ad7780_info;



	if (pdata && gpio_is_valid(pdata->gpio_pdrst)) {



		ret = devm_gpio_request_one(&spi->dev,

					    pdata->gpio_pdrst,

					    GPIOF_OUT_INIT_LOW,

drivers/staging/iio/adc/ad7816.c

+0 −3
Original line number Diff line number Diff line
@@ -38,7 +38,6 @@ 
#define AD7816_TEMP_FLOAT_OFFSET	2

#define AD7816_TEMP_FLOAT_MASK		0x3





/*

 * struct ad7816_chip_info - chip specific information

 */
@@ -70,7 +69,6 @@ static int ad7816_spi_read(struct ad7816_chip_info *chip, u16 *data) 
	}

	gpio_set_value(chip->rdwr_pin, 1);





	if (chip->mode == AD7816_PD) { /* operating mode 2 */

		gpio_set_value(chip->convert_pin, 1);

		gpio_set_value(chip->convert_pin, 0);
@@ -203,7 +201,6 @@ static IIO_DEVICE_ATTR(channel, S_IRUGO | S_IWUSR, 
		ad7816_store_channel,

		0);





static ssize_t ad7816_show_value(struct device *dev,

				 struct device_attribute *attr,

				 char *buf)