Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 25244227 authored by Nicolas Boichat's avatar Nicolas Boichat Committed by Greg Kroah-Hartman
Browse files

usb: hub: Per-port setting to use old enumeration scheme 



The "old" enumeration scheme is considerably faster (it takes
~244ms instead of ~356ms to get the descriptor).

It is currently only possible to use the old scheme globally
(/sys/module/usbcore/parameters/old_scheme_first), which is not
desirable as the new scheme was introduced to increase compatibility
with more devices.

However, in our case, we care about time-to-active for a specific
USB device (which we make the firmware for), on a specific port
(that is pogo-pin based: not a standard USB port). This new
sysfs option makes it possible to use the old scheme on a single
port only.

Signed-off-by: default avatarNicolas Boichat <drinkcat@chromium.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 380375b9

Documentation/ABI/testing/sysfs-bus-usb

+18 −0
Original line number Diff line number Diff line
@@ -189,6 +189,24 @@ Description: 
		The file will read "hotplug", "wired" and "not used" if the

		information is available, and "unknown" otherwise.



What:		/sys/bus/usb/devices/.../(hub interface)/portX/quirks

Date:		May 2018

Contact:	Nicolas Boichat <drinkcat@chromium.org>

Description:

		In some cases, we care about time-to-active for devices

		connected on a specific port (e.g. non-standard USB port like

		pogo pins), where the device to be connected is known in

		advance, and behaves well according to the specification.

		This attribute is a bit-field that controls the behavior of

		a specific port:

		 - Bit 0 of this field selects the "old" enumeration scheme,

		   as it is considerably faster (it only causes one USB reset

		   instead of 2).

		   The old enumeration scheme can also be selected globally

		   using /sys/module/usbcore/parameters/old_scheme_first, but

		   it is often not desirable as the new scheme was introduced to

		   increase compatibility with more devices.



What:		/sys/bus/usb/devices/.../(hub interface)/portX/over_current_count

Date:		February 2018

Contact:	Richard Leitner <richard.leitner@skidata.com>

drivers/usb/core/hub.c

+9 −4
Original line number Diff line number Diff line
@@ -2636,7 +2636,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub) 
#define SET_ADDRESS_TRIES	2

#define GET_DESCRIPTOR_TRIES	2

#define SET_CONFIG_TRIES	(2 * (use_both_schemes + 1))

#define USE_NEW_SCHEME(i)	((i) / 2 == (int)old_scheme_first)

#define USE_NEW_SCHEME(i, scheme)	((i) / 2 == (int)scheme)



#define HUB_ROOT_RESET_TIME	60	/* times are in msec */

#define HUB_SHORT_RESET_TIME	10
@@ -2651,12 +2651,16 @@ static unsigned hub_is_wusb(struct usb_hub *hub) 
 * enumeration failures, so disable this enumeration scheme for USB3

 * devices.

 */

static bool use_new_scheme(struct usb_device *udev, int retry)

static bool use_new_scheme(struct usb_device *udev, int retry,

			   struct usb_port *port_dev)

{

	int old_scheme_first_port =

		port_dev->quirks & USB_PORT_QUIRK_OLD_SCHEME;



	if (udev->speed >= USB_SPEED_SUPER)

		return false;



	return USE_NEW_SCHEME(retry);

	return USE_NEW_SCHEME(retry, old_scheme_first_port || old_scheme_first);

}



/* Is a USB 3.0 port in the Inactive or Compliance Mode state?
@@ -4392,6 +4396,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, 
{

	struct usb_device	*hdev = hub->hdev;

	struct usb_hcd		*hcd = bus_to_hcd(hdev->bus);

	struct usb_port		*port_dev = hub->ports[port1 - 1];

	int			retries, operations, retval, i;

	unsigned		delay = HUB_SHORT_RESET_TIME;

	enum usb_device_speed	oldspeed = udev->speed;
@@ -4513,7 +4518,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, 
	for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) {

		bool did_new_scheme = false;



		if (use_new_scheme(udev, retry_counter)) {

		if (use_new_scheme(udev, retry_counter, port_dev)) {

			struct usb_device_descriptor *buf;

			int r = 0;

drivers/usb/core/hub.h

+1 −0
Original line number Diff line number Diff line
@@ -98,6 +98,7 @@ struct usb_port { 
	struct mutex status_lock;

	u32 over_current_count;

	u8 portnum;

	u32 quirks;

	unsigned int is_superspeed:1;

	unsigned int usb3_lpm_u1_permit:1;

	unsigned int usb3_lpm_u2_permit:1;

drivers/usb/core/port.c

+23 −0
Original line number Diff line number Diff line
@@ -50,6 +50,28 @@ static ssize_t over_current_count_show(struct device *dev, 
}

static DEVICE_ATTR_RO(over_current_count);



static ssize_t quirks_show(struct device *dev,

			   struct device_attribute *attr, char *buf)

{

	struct usb_port *port_dev = to_usb_port(dev);



	return sprintf(buf, "%08x\n", port_dev->quirks);

}



static ssize_t quirks_store(struct device *dev, struct device_attribute *attr,

			    const char *buf, size_t count)

{

	struct usb_port *port_dev = to_usb_port(dev);

	u32 value;



	if (kstrtou32(buf, 16, &value))

		return -EINVAL;



	port_dev->quirks = value;

	return count;

}

static DEVICE_ATTR_RW(quirks);



static ssize_t usb3_lpm_permit_show(struct device *dev,

			      struct device_attribute *attr, char *buf)

{
@@ -118,6 +140,7 @@ static DEVICE_ATTR_RW(usb3_lpm_permit); 


static struct attribute *port_dev_attrs[] = {

	&dev_attr_connect_type.attr,

	&dev_attr_quirks.attr,

	&dev_attr_over_current_count.attr,

	NULL,

};

include/linux/usb.h

+7 −0
Original line number Diff line number Diff line
@@ -489,6 +489,13 @@ enum usb_port_connect_type { 
	USB_PORT_NOT_USED,

};



/*

 * USB port quirks.

 */



/* For the given port, prefer the old (faster) enumeration scheme. */

#define USB_PORT_QUIRK_OLD_SCHEME	BIT(0)



/*

 * USB 2.0 Link Power Management (LPM) parameters.

 */