Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1dda9513 authored by spuligil's avatar spuligil Committed by snandini
Browse files

fw-api: CL 12346601 - update fw common interface files

Change-Id: I0eaa46462f0affb960b9411aea015c4d3eef300c
WMI: add timestamp, AGC gain to CFR capture msg
CRs-Fixed: 2262693
parent d35a6b5b
Loading
Loading
Loading
Loading
+31 −0
Original line number Diff line number Diff line
@@ -31413,6 +31413,17 @@ typedef struct {
    A_UINT32 cfo_measurement_valid :1,
             cfo_measurement :14,
             reserved :17;
    /* RX packet start timestamp.
     * It reports the time the first L-STF ADC sample arrived at RX antenna
     * It is in units of 480 MHz clock, i.e. number of clock cycles at 480 MHz.
     */
    A_UINT32 rx_start_ts;
    /*
     * The rx_ts_reset flag will be set to 1 upon every reset of rx_start_ts.
     */
    A_UINT32 rx_ts_reset;
} wmi_peer_cfr_capture_event_fixed_param;
#define WMI_UNIFIED_CHAIN_PHASE_MASK 0x0000ffff
@@ -31421,6 +31432,17 @@ typedef struct {
#define WMI_UNIFIED_CHAIN_PHASE_SET(tlv, chain_idx, value) \
    (tlv)->chain_phase[chain_idx] = (WMI_UNIFIED_CHAIN_PHASE_MASK & (value))
#define WMI_CFR_AGC_GAIN_CHAINS_PER_U32 4
#define WMI_UNIFIED_AGC_GAIN_MASK 0x000000ff
#define WMI_UNIFIED_AGC_GAIN_GET(tlv, chain_idx) \
    ((A_UINT8) ((tlv)->agc_gain_index[(chain_idx)/WMI_CFR_AGC_GAIN_CHAINS_PER_U32] >> \
        ((chain_idx)%WMI_CFR_AGC_GAIN_CHAINS_PER_U32)*8) & WMI_UNIFIED_AGC_GAIN_MASK)
#define WMI_UNIFIED_AGC_GAIN_SET(tlv, chain_idx, value) \
    (tlv)->agc_gain_index[chain_idx/WMI_CFR_AGC_GAIN_CHAINS_PER_U32] = \
        (tlv)->agc_gain_index[chain_idx/WMI_CFR_AGC_GAIN_CHAINS_PER_U32] & \
            ~(0xff << (((chain_idx)%WMI_CFR_AGC_GAIN_CHAINS_PER_U32)*8)) | \
            (((value)<<((chain_idx)%WMI_CFR_AGC_GAIN_CHAINS_PER_U32)*8))
typedef struct {
    /** TLV tag and len; tag equals
    * WMITLV_TAG_STRUC_wmi_peer_cfr_capture_event_phase_fixed_param */
@@ -31440,6 +31462,15 @@ typedef struct {
     * the valid portion of the 4-byte word containing the chain phase data.
     */
    A_UINT32 chain_phase[WMI_MAX_CHAINS];
    /* agc_gain_index
     * It shows an index in the AGC gain LUT.
     * agc gain should be in range between 0 to 62.
     * 4 AGC gain index values are packed into each A_UINT32 word;
     * use the WMI_UNITIFED_AGC_GAIN_GET/SET macros to read/write
     * the AGC gain indices for individual chains.
     */
    A_UINT32 agc_gain_index[WMI_MAX_CHAINS/WMI_CFR_AGC_GAIN_CHAINS_PER_U32];
} wmi_peer_cfr_capture_event_phase_fixed_param;
#define WMI_PEER_CFR_CAPTURE_EVT_STATUS_OK      0x80000000
+1 −1
Original line number Diff line number Diff line
@@ -36,7 +36,7 @@
#define __WMI_VER_MINOR_    0
/** WMI revision number has to be incremented when there is a
 *  change that may or may not break compatibility. */
#define __WMI_REVISION_ 933
#define __WMI_REVISION_ 934

/** The Version Namespace should not be normally changed. Only
 *  host and firmware of the same WMI namespace will work