Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 168e0461 authored by Lothar Waßmann's avatar Lothar Waßmann Committed by Shawn Guo
Browse files

ARM: dts: imx6: add support for more Ka-Ro electronics modules 



Add support for the following i.MX6 based modules from Ka-Ro
electronics GmbH:
TX6S-8034:
Processor    Freescale i.MX 6 Solo, 800MHz
RAM          256MiB DDR3 SDRAM
ROM          128MiB NAND Flash
Power supply Single 3.1V to 5.5V
Size         31mm SO-DIMM
Temp. Range  industrial grade (-40°C/-25°C to 105°C Tj)

TX6S-8035:
Processor    Freescale i.MX 6 Solo, 800MHz
RAM          512MiB DDR3 SDRAM
ROM          4GiB eMMC
Power supply Single 3.1V to 5.5V
Size         31mm SO-DIMM
Temp. Range  industrial grade (-40°C/-25°C to 105°C Tj)

TX6U-8033:
Processor    Freescale i.MX 6 Dual Lite, 800MHz
RAM          1GiB DDR3 SDRAM
ROM          4GiB eMMC
Power supply Single 3.1V to 5.5V
Size         31mm SO-DIMM
Temp. Range  industrial grade (-40°C/-25°C to 105°C Tj)

TX6Q-1036:
Processor    Freescale i.MX 6Quad, 1GHz
RAM          1GB DDR3 SDRAM 64-bit
ROM          8GiB eMMC
Power supply Single 3.1V to 5.5V
Size         31mm SO-DIMM
Temp. Range  Extended Consumer Grade (-20°C to 105°C Tj)

Signed-off-by: default avatarLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 720f4340

arch/arm/boot/dts/Makefile

+4 −0
Original line number Diff line number Diff line
@@ -320,7 +320,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ 
	imx6dl-sabrelite.dtb \

	imx6dl-sabresd.dtb \

	imx6dl-tx6dl-comtft.dtb \

	imx6dl-tx6s-8034.dtb \

	imx6dl-tx6s-8035.dtb \

	imx6dl-tx6u-801x.dtb \

	imx6dl-tx6u-8033.dtb \

	imx6dl-tx6u-811x.dtb \

	imx6dl-udoo.dtb \

	imx6dl-wandboard.dtb \
@@ -360,6 +363,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ 
	imx6q-tx6q-1010-comtft.dtb \

	imx6q-tx6q-1020.dtb \

	imx6q-tx6q-1020-comtft.dtb \

	imx6q-tx6q-1036.dtb \

	imx6q-tx6q-1110.dtb \

	imx6q-udoo.dtb \

	imx6q-wandboard.dtb \

arch/arm/boot/dts/imx6dl-tx6s-8034.dts

0 → 100644
+237 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2015-2016 Lothar Waßmann <LW@KARO-electronics.de>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License

 *     version 2 as published by the Free Software Foundation.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "imx6dl.dtsi"

#include "imx6qdl-tx6.dtsi"



/ {

	model = "Ka-Ro electronics TX6S-8034 Module";

	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";



	aliases {

		display = &display;

		ipu1 = &ipu1;

	};



	cpus {

		/delete-node/ cpu@1;

	};



	backlight: backlight {

		compatible = "pwm-backlight";

		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_lcd0_pwr>;

		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;

		power-supply = <&reg_lcd1_pwr>;

		/*

		 * a poor man's way to create a 1:1 relationship between

		 * the PWM value and the actual duty cycle

		 */

		brightness-levels = < 0  1  2  3  4  5  6  7  8  9

				     10 11 12 13 14 15 16 17 18 19

				     20 21 22 23 24 25 26 27 28 29

				     30 31 32 33 34 35 36 37 38 39

				     40 41 42 43 44 45 46 47 48 49

				     50 51 52 53 54 55 56 57 58 59

				     60 61 62 63 64 65 66 67 68 69

				     70 71 72 73 74 75 76 77 78 79

				     80 81 82 83 84 85 86 87 88 89

				     90 91 92 93 94 95 96 97 98 99

				    100>;

		default-brightness-level = <50>;

	};



	display: display@di0 {

		compatible = "fsl,imx-parallel-display";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_disp0_2>;

		interface-pix-fmt = "rgb24";

		status = "okay";



		port {

			display0_in: endpoint {

				remote-endpoint = <&ipu1_di0_disp0>;

			};

		};



		display-timings {

			native-mode = <&vga>;



			vga: VGA {

				clock-frequency = <25200000>;

				hactive = <640>;

				vactive = <480>;

				hback-porch = <48>;

				hsync-len = <96>;

				hfront-porch = <16>;

				vback-porch = <31>;

				vsync-len = <2>;

				vfront-porch = <12>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ETV570 {

				clock-frequency = <25200000>;

				hactive = <640>;

				vactive = <480>;

				hback-porch = <114>;

				hsync-len = <30>;

				hfront-porch = <16>;

				vback-porch = <32>;

				vsync-len = <3>;

				vfront-porch = <10>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ET0350 {

				clock-frequency = <6413760>;

				hactive = <320>;

				vactive = <240>;

				hback-porch = <34>;

				hsync-len = <34>;

				hfront-porch = <20>;

				vback-porch = <15>;

				vsync-len = <3>;

				vfront-porch = <4>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ET0430 {

				clock-frequency = <9009000>;

				hactive = <480>;

				vactive = <272>;

				hback-porch = <2>;

				hsync-len = <41>;

				hfront-porch = <2>;

				vback-porch = <2>;

				vsync-len = <10>;

				vfront-porch = <2>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <1>;

			};



			ET0500 {

				clock-frequency = <33264000>;

				hactive = <800>;

				vactive = <480>;

				hback-porch = <88>;

				hsync-len = <128>;

				hfront-porch = <40>;

				vback-porch = <33>;

				vsync-len = <2>;

				vfront-porch = <10>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ET0700 { /* same as ET0500 */

				clock-frequency = <33264000>;

				hactive = <800>;

				vactive = <480>;

				hback-porch = <88>;

				hsync-len = <128>;

				hfront-porch = <40>;

				vback-porch = <33>;

				vsync-len = <2>;

				vfront-porch = <10>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ETQ570 {

				clock-frequency = <6596040>;

				hactive = <320>;

				vactive = <240>;

				hback-porch = <38>;

				hsync-len = <30>;

				hfront-porch = <30>;

				vback-porch = <16>;

				vsync-len = <3>;

				vfront-porch = <4>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};

		};

	};

};



&ds1339 {

	status = "disabled";

};



&pinctrl_usdhc1 {

	fsl,pins = <

		MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1

		MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1

		MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1

		MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1

		MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1

		MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1

		MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */

	>;

};



&ipu1_di0_disp0 {

	remote-endpoint = <&display0_in>;

};



&reg_lcd0_pwr {

	status = "disabled";

};

arch/arm/boot/dts/imx6dl-tx6s-8035.dts

0 → 100644
+253 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2015-2016 Lothar Waßmann <LW@KARO-electronics.de>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License

 *     version 2 as published by the Free Software Foundation.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "imx6dl.dtsi"

#include "imx6qdl-tx6.dtsi"



/ {

	model = "Ka-Ro electronics TX6S-8035 Module";

	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";



	aliases {

		display = &display;

		ipu1 = &ipu1;

	};



	cpus {

		/delete-node/ cpu@1;

	};



	backlight: backlight {

		compatible = "pwm-backlight";

		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_lcd0_pwr>;

		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;

		power-supply = <&reg_lcd1_pwr>;

		/*

		 * a poor man's way to create a 1:1 relationship between

		 * the PWM value and the actual duty cycle

		 */

		brightness-levels = < 0  1  2  3  4  5  6  7  8  9

				     10 11 12 13 14 15 16 17 18 19

				     20 21 22 23 24 25 26 27 28 29

				     30 31 32 33 34 35 36 37 38 39

				     40 41 42 43 44 45 46 47 48 49

				     50 51 52 53 54 55 56 57 58 59

				     60 61 62 63 64 65 66 67 68 69

				     70 71 72 73 74 75 76 77 78 79

				     80 81 82 83 84 85 86 87 88 89

				     90 91 92 93 94 95 96 97 98 99

				    100>;

		default-brightness-level = <50>;

	};



	display: display@di0 {

		compatible = "fsl,imx-parallel-display";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_disp0_2>;

		interface-pix-fmt = "rgb24";

		status = "okay";



		port {

			display0_in: endpoint {

				remote-endpoint = <&ipu1_di0_disp0>;

			};

		};



		display-timings {

			native-mode = <&vga>;



			vga: VGA {

				clock-frequency = <25200000>;

				hactive = <640>;

				vactive = <480>;

				hback-porch = <48>;

				hsync-len = <96>;

				hfront-porch = <16>;

				vback-porch = <31>;

				vsync-len = <2>;

				vfront-porch = <12>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ETV570 {

				clock-frequency = <25200000>;

				hactive = <640>;

				vactive = <480>;

				hback-porch = <114>;

				hsync-len = <30>;

				hfront-porch = <16>;

				vback-porch = <32>;

				vsync-len = <3>;

				vfront-porch = <10>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ET0350 {

				clock-frequency = <6413760>;

				hactive = <320>;

				vactive = <240>;

				hback-porch = <34>;

				hsync-len = <34>;

				hfront-porch = <20>;

				vback-porch = <15>;

				vsync-len = <3>;

				vfront-porch = <4>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ET0430 {

				clock-frequency = <9009000>;

				hactive = <480>;

				vactive = <272>;

				hback-porch = <2>;

				hsync-len = <41>;

				hfront-porch = <2>;

				vback-porch = <2>;

				vsync-len = <10>;

				vfront-porch = <2>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <1>;

			};



			ET0500 {

				clock-frequency = <33264000>;

				hactive = <800>;

				vactive = <480>;

				hback-porch = <88>;

				hsync-len = <128>;

				hfront-porch = <40>;

				vback-porch = <33>;

				vsync-len = <2>;

				vfront-porch = <10>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ET0700 { /* same as ET0500 */

				clock-frequency = <33264000>;

				hactive = <800>;

				vactive = <480>;

				hback-porch = <88>;

				hsync-len = <128>;

				hfront-porch = <40>;

				vback-porch = <33>;

				vsync-len = <2>;

				vfront-porch = <10>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ETQ570 {

				clock-frequency = <6596040>;

				hactive = <320>;

				vactive = <240>;

				hback-porch = <38>;

				hsync-len = <30>;

				hfront-porch = <30>;

				vback-porch = <16>;

				vsync-len = <3>;

				vfront-porch = <4>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};

		};

	};

};



&ds1339 {

	status = "disabled";

};



&gpmi {

	status = "disabled";

};



&ipu1_di0_disp0 {

	remote-endpoint = <&display0_in>;

};



&reg_lcd0_pwr {

	status = "disabled";

};



&usdhc4 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc4>;

	bus-width = <4>;

	non-removable;

	no-1-8-v;

	fsl,wp-controller;

	status = "okay";

};



&iomuxc {

	pinctrl_usdhc4: usdhc4grp {

		fsl,pins = <

			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1

			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1

			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1

			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1

			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1

			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1

			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1

		>;

	};

};

arch/arm/boot/dts/imx6dl-tx6u-8033.dts

0 → 100644
+248 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License

 *     version 2 as published by the Free Software Foundation.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "imx6dl.dtsi"

#include "imx6qdl-tx6.dtsi"



/ {

	model = "Ka-Ro electronics TX6U-8033 Module";

	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";



	aliases {

		display = &display;

	};



	backlight: backlight {

		compatible = "pwm-backlight";

		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_lcd0_pwr>;

		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;

		power-supply = <&reg_lcd1_pwr>;

		/*

		 * a poor man's way to create a 1:1 relationship between

		 * the PWM value and the actual duty cycle

		 */

		brightness-levels = < 0  1  2  3  4  5  6  7  8  9

				     10 11 12 13 14 15 16 17 18 19

				     20 21 22 23 24 25 26 27 28 29

				     30 31 32 33 34 35 36 37 38 39

				     40 41 42 43 44 45 46 47 48 49

				     50 51 52 53 54 55 56 57 58 59

				     60 61 62 63 64 65 66 67 68 69

				     70 71 72 73 74 75 76 77 78 79

				     80 81 82 83 84 85 86 87 88 89

				     90 91 92 93 94 95 96 97 98 99

				    100>;

		default-brightness-level = <50>;

	};



	display: display@di0 {

		compatible = "fsl,imx-parallel-display";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_disp0_2>;

		interface-pix-fmt = "rgb24";

		status = "okay";



		port {

			display0_in: endpoint {

				remote-endpoint = <&ipu1_di0_disp0>;

			};

		};



		display-timings {

			native-mode = <&vga>;



			vga: VGA {

				clock-frequency = <25200000>;

				hactive = <640>;

				vactive = <480>;

				hback-porch = <48>;

				hsync-len = <96>;

				hfront-porch = <16>;

				vback-porch = <31>;

				vsync-len = <2>;

				vfront-porch = <12>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ETV570 {

				clock-frequency = <25200000>;

				hactive = <640>;

				vactive = <480>;

				hback-porch = <114>;

				hsync-len = <30>;

				hfront-porch = <16>;

				vback-porch = <32>;

				vsync-len = <3>;

				vfront-porch = <10>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ET0350 {

				clock-frequency = <6413760>;

				hactive = <320>;

				vactive = <240>;

				hback-porch = <34>;

				hsync-len = <34>;

				hfront-porch = <20>;

				vback-porch = <15>;

				vsync-len = <3>;

				vfront-porch = <4>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ET0430 {

				clock-frequency = <9009000>;

				hactive = <480>;

				vactive = <272>;

				hback-porch = <2>;

				hsync-len = <41>;

				hfront-porch = <2>;

				vback-porch = <2>;

				vsync-len = <10>;

				vfront-porch = <2>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <1>;

			};



			ET0500 {

				clock-frequency = <33264000>;

				hactive = <800>;

				vactive = <480>;

				hback-porch = <88>;

				hsync-len = <128>;

				hfront-porch = <40>;

				vback-porch = <33>;

				vsync-len = <2>;

				vfront-porch = <10>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ET0700 { /* same as ET0500 */

				clock-frequency = <33264000>;

				hactive = <800>;

				vactive = <480>;

				hback-porch = <88>;

				hsync-len = <128>;

				hfront-porch = <40>;

				vback-porch = <33>;

				vsync-len = <2>;

				vfront-porch = <10>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};



			ETQ570 {

				clock-frequency = <6596040>;

				hactive = <320>;

				vactive = <240>;

				hback-porch = <38>;

				hsync-len = <30>;

				hfront-porch = <30>;

				vback-porch = <16>;

				vsync-len = <3>;

				vfront-porch = <4>;

				hsync-active = <0>;

				vsync-active = <0>;

				de-active = <1>;

				pixelclk-active = <0>;

			};

		};

	};

};



&ds1339 {

	status = "disabled";

};



&gpmi {

	status = "disabled";

};



&ipu1_di0_disp0 {

	remote-endpoint = <&display0_in>;

};



&reg_lcd0_pwr {

	status = "disabled";

};



&usdhc4 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc4>;

	bus-width = <4>;

	non-removable;

	no-1-8-v;

	fsl,wp-controller;

	status = "okay";

};



&iomuxc {

	pinctrl_usdhc4: usdhc4grp {

		fsl,pins = <

			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1

			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1

			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1

			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1

			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1

			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1

			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1

		>;

	};

};

arch/arm/boot/dts/imx6q-tx6q-1036.dts

0 → 100644
+252 −0

File added.

Preview size limit exceeded, changes collapsed.