Commit 0ea70774 authored May 12, 2022 by Greg Kroah-Hartman

Merge 4.19.242 into android-4.19-stable



Changes in 4.19.242
	usb: mtu3: fix USB 3.0 dual-role-switch from device to host
	USB: quirks: add a Realtek card reader
	USB: quirks: add STRING quirk for VCOM device
	USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS
	USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader
	USB: serial: option: add support for Cinterion MV32-WA/MV32-WB
	USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions
	xhci: stop polling roothubs after shutdown
	iio: dac: ad5592r: Fix the missing return value.
	iio: dac: ad5446: Fix read_raw not returning set value
	iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()
	usb: misc: fix improper handling of refcount in uss720_probe()
	usb: gadget: uvc: Fix crash when encoding data for usb request
	usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
	usb: dwc3: core: Fix tx/rx threshold settings
	usb: dwc3: gadget: Return proper request status
	serial: imx: fix overrun interrupts in DMA mode
	serial: 8250: Also set sticky MCR bits in console restoration
	serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device
	hex2bin: make the function hex_to_bin constant-time
	hex2bin: fix access beyond string end
	mtd: rawnand: fix ecc parameters for mt7622
	USB: Fix xhci event ring dequeue pointer ERDP update issue
	ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue
	phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe
	phy: samsung: exynos5250-sata: fix missing device put in probe error paths
	ARM: OMAP2+: Fix refcount leak in omap_gic_of_init
	ARM: dts: Fix mmc order for omap3-gta04
	ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35
	ipvs: correctly print the memory size of ip_vs_conn_tab
	mtd: rawnand: Fix return value check of wait_for_completion_timeout
	tcp: md5: incorrect tcp_header_len for incoming connections
	sctp: check asoc strreset_chunk in sctp_generate_reconf_event
	ARM: dts: imx6ull-colibri: fix vqmmc regulator
	pinctrl: pistachio: fix use of irq_of_parse_and_map()
	net: hns3: add validity check for message data length
	ip_gre: Make o_seqno start from 0 in native mode
	tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
	bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
	clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()
	net: bcmgenet: hide status block before TX timestamping
	bnx2x: fix napi API usage sequence
	ASoC: wm8731: Disable the regulator when probing fails
	ip6_gre: Avoid updating tunnel->tun_hlen in __gre6_xmit()
	x86: __memcpy_flushcache: fix wrong alignment if size > 2^32
	cifs: destage any unwritten data to the server before calling copychunk_write
	drivers: net: hippi: Fix deadlock in rr_close()
	x86/cpu: Load microcode during restore_processor_state()
	tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2
	tty: n_gsm: fix malformed counter for out of frame data
	netfilter: nft_socket: only do sk lookups when indev is available
	tty: n_gsm: fix insufficient txframe size
	tty: n_gsm: fix missing explicit ldisc flush
	tty: n_gsm: fix wrong command retry handling
	tty: n_gsm: fix wrong command frame length field encoding
	tty: n_gsm: fix incorrect UA handling
	drm/vgem: Close use-after-free race in vgem_gem_create
	MIPS: Fix CP0 counter erratum detection for R4k CPUs
	parisc: Merge model and model name into one line in /proc/cpuinfo
	ALSA: fireworks: fix wrong return count shorter than expected by 4 bytes
	gpiolib: of: fix bounds check for 'gpio-reserved-ranges'
	Revert "SUNRPC: attempt AF_LOCAL connect on setup"
	firewire: fix potential uaf in outbound_phy_packet_callback()
	firewire: remove check of list iterator against head past the loop body
	firewire: core: extend card->lock in fw_core_handle_bus_reset
	genirq: Synchronize interrupt thread startup
	ASoC: wm8958: Fix change notifications for DSP controls
	can: grcan: grcan_close(): fix deadlock
	can: grcan: use ofdev->dev when allocating DMA memory
	nfc: replace improper check device_is_registered() in netlink related functions
	nfc: nfcmrvl: main: reorder destructive operations in nfcmrvl_nci_unregister_dev to avoid bugs
	NFC: netlink: fix sleep in atomic bug when firmware download timeout
	hwmon: (adt7470) Fix warning on module removal
	ASoC: dmaengine: Restore NULL prepare_slave_config() callback
	net: stmmac: dwmac-sun8i: add missing of_node_put() in sun8i_dwmac_register_mdio_mux()
	net: emaclite: Add error handling for of_address_to_resource()
	selftests: mirror_gre_bridge_1q: Avoid changing PVID while interface is operational
	smsc911x: allow using IRQ0
	btrfs: always log symlinks in full mode
	net: igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
	kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMU
	mm: fix unexpected zeroed page mapping with zram swap
	tcp: make sure treq->af_specific is initialized
	dm: fix mempool NULL pointer race when completing IO
	dm: interlock pending dm_io and dm_wait_for_bios_completion
	PCI: aardvark: Clear all MSIs at setup
	PCI: aardvark: Fix reading MSI interrupt number
	mmc: rtsx: add 74 Clocks in power on flow
	Linux 4.19.242

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I425b606fd8d4e787caa99f35d9555742c78a15c8

parents 76d5fac0 89ef8906

Makefile

+1 −1

Original line number	Diff line number	Diff line
		# SPDX-License-Identifier: GPL-2.0
		VERSION = 4
		PATCHLEVEL = 19
		SUBLEVEL = 241
		SUBLEVEL = 242
		EXTRAVERSION =
		NAME = "People's Front"

arch/arm/boot/dts/imx6qdl-apalis.dtsi

+8 −2

Original line number	Diff line number	Diff line
		@@ -313,6 +313,8 @@
		codec: sgtl5000@a {
		compatible = "fsl,sgtl5000";
		reg = <0x0a>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_sgtl5000>;
		clocks = <&clks IMX6QDL_CLK_CKO>;
		VDDA-supply = <&reg_module_3v3_audio>;
		VDDIO-supply = <&reg_module_3v3>;
		@@ -540,8 +542,6 @@
		MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
		MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
		MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
		/* SGTL5000 sys_mclk */
		MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
		>;
		};

		@@ -807,6 +807,12 @@
		>;
		};

		pinctrl_sgtl5000: sgtl5000grp {
		fsl,pins = <
		MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
		>;
		};

		pinctrl_spdif: spdifgrp {
		fsl,pins = <
		MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0

arch/arm/boot/dts/imx6ull-colibri.dtsi

+1 −1

Original line number	Diff line number	Diff line
		@@ -37,7 +37,7 @@

		reg_sd1_vmmc: regulator-sd1-vmmc {
		compatible = "regulator-gpio";
		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
		gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_snvs_reg_sd>;
		regulator-always-on;

arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts

+15 −0

Original line number	Diff line number	Diff line
		@@ -15,3 +15,18 @@
		model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
		compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3";
		};

		&omap3_pmx_core2 {
		pinctrl-names = "default";
		pinctrl-0 = <&hsusb2_2_pins>;
		hsusb2_2_pins: pinmux_hsusb2_2_pins {
		pinctrl-single,pins = <
		OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT \| MUX_MODE3) /* etk_d10.hsusb2_clk */
		OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT \| MUX_MODE3) /* etk_d11.hsusb2_stp */
		OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN \| MUX_MODE3) /* etk_d12.hsusb2_dir */
		OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN \| MUX_MODE3) /* etk_d13.hsusb2_nxt */
		OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN \| MUX_MODE3) /* etk_d14.hsusb2_data0 */
		OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN \| MUX_MODE3) /* etk_d15.hsusb2_data1 */
		>;
		};
		};

arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts

+15 −0

Original line number	Diff line number	Diff line
		@@ -15,3 +15,18 @@
		model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
		compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
		};

		&omap3_pmx_core2 {
		pinctrl-names = "default";
		pinctrl-0 = <&hsusb2_2_pins>;
		hsusb2_2_pins: pinmux_hsusb2_2_pins {
		pinctrl-single,pins = <
		OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT \| MUX_MODE3) /* etk_d10.hsusb2_clk */
		OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT \| MUX_MODE3) /* etk_d11.hsusb2_stp */
		OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN \| MUX_MODE3) /* etk_d12.hsusb2_dir */
		OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN \| MUX_MODE3) /* etk_d13.hsusb2_nxt */
		OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN \| MUX_MODE3) /* etk_d14.hsusb2_data0 */
		OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN \| MUX_MODE3) /* etk_d15.hsusb2_data1 */
		>;
		};
		};