Merge "ASoC: AQT1000: DLKM support for AQT1000 driver"

include $(MY_LOCAL_PATH)/asoc/codecs/wcd934x/Android.mk

endif

ifeq ($(call is-board-platform-in-list,sdm670 msmnile),true)

$(shell rm -rf $(PRODUCT_OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/aqt1000/Module.symvers)

include $(MY_LOCAL_PATH)/asoc/codecs/aqt1000/Android.mk

endif

ifeq ($(call is-board-platform-in-list,msm8953 sdm670 qcs605),true)

$(shell rm -rf $(PRODUCT_OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/sdm660_cdc/Module.symvers)

$(shell rm -rf $(PRODUCT_OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/msm_sdw/Module.symvers)

# Android makefile for audio kernel modules

AUDIO_CHIPSET := audio

# Build/Package only in case of supported target

ifeq ($(call is-board-platform-in-list,sdm670 msmnile),true)

LOCAL_PATH := $(call my-dir)

# This makefile is only for DLKM

ifneq ($(findstring vendor,$(LOCAL_PATH)),)

ifneq ($(findstring opensource,$(LOCAL_PATH)),)

	AUDIO_BLD_DIR := $(ANDROID_BUILD_TOP)/vendor/qcom/opensource/audio-kernel

endif # opensource

DLKM_DIR := $(TOP)/device/qcom/common/dlkm

# Build audio.ko as $(AUDIO_CHIPSET)_audio.ko

###########################################################

# This is set once per LOCAL_PATH, not per (kernel) module

KBUILD_OPTIONS := AUDIO_ROOT=$(AUDIO_BLD_DIR)

# We are actually building audio.ko here, as per the

# requirement we are specifying <chipset>_audio.ko as LOCAL_MODULE.

# This means we need to rename the module to <chipset>_audio.ko

# after audio.ko is built.

KBUILD_OPTIONS += MODNAME=aqt1000_cdc_dlkm

KBUILD_OPTIONS += BOARD_PLATFORM=$(TARGET_BOARD_PLATFORM)

KBUILD_OPTIONS += $(AUDIO_SELECT)

###########################################################

include $(CLEAR_VARS)

LOCAL_MODULE              := $(AUDIO_CHIPSET)_aqt1000_cdc.ko

LOCAL_MODULE_KBUILD_NAME  := aqt1000_cdc_dlkm.ko

LOCAL_MODULE_TAGS         := optional

LOCAL_MODULE_DEBUG_ENABLE := true

LOCAL_MODULE_PATH         := $(KERNEL_MODULES_OUT)

include $(DLKM_DIR)/AndroidKernelModule.mk

###########################################################

endif # DLKM check

endif # supported target check

# We can build either as part of a standalone Kernel build or as

# an external module.  Determine which mechanism is being used

ifeq ($(MODNAME),)

	KERNEL_BUILD := 1

else

	KERNEL_BUILD := 0

endif

ifeq ($(KERNEL_BUILD), 1)

	# These are configurable via Kconfig for kernel-based builds

	# Need to explicitly configure for Android-based builds

	AUDIO_BLD_DIR := $(ANDROID_BUILD_TOP)/kernel/msm-4.14

	AUDIO_ROOT := $(AUDIO_BLD_DIR)/techpack/audio

endif

ifeq ($(KERNEL_BUILD), 0)

	# These are configurable via Kconfig for kernel-based builds

	# Need to explicitly configure for Android-based builds

	ifeq ($(CONFIG_ARCH_SDM670), y)

		include $(AUDIO_ROOT)/config/sdm670auto.conf

		export

		INCS    +=  -include $(AUDIO_ROOT)/config/sdm670autoconf.h

	endif

	ifeq ($(CONFIG_ARCH_SDM855), y)

		include $(AUDIO_ROOT)/config/sdm855auto.conf

		export

		INCS    +=  -include $(AUDIO_ROOT)/config/sdm855autoconf.h

	endif

endif

# As per target team, build is done as follows:

# Defconfig : build with default flags

# Slub      : defconfig  + CONFIG_SLUB_DEBUG := y +

#	      CONFIG_SLUB_DEBUG_ON := y + CONFIG_PAGE_POISONING := y

# Perf      : Using appropriate msmXXXX-perf_defconfig

#

# Shipment builds (user variants) should not have any debug feature

# enabled. This is identified using 'TARGET_BUILD_VARIANT'. Slub builds

# are identified using the CONFIG_SLUB_DEBUG_ON configuration. Since

# there is no other way to identify defconfig builds, QTI internal

# representation of perf builds (identified using the string 'perf'),

# is used to identify if the build is a slub or defconfig one. This

# way no critical debug feature will be enabled for perf and shipment

# builds. Other OEMs are also protected using the TARGET_BUILD_VARIANT

# config.

############ UAPI ############

UAPI_DIR :=	uapi

UAPI_INC :=	-I$(AUDIO_ROOT)/include/$(UAPI_DIR)

############ COMMON ############

COMMON_DIR :=	include

COMMON_INC :=	-I$(AUDIO_ROOT)/$(COMMON_DIR)

# for AQT1000 Codec

ifeq ($(CONFIG_SND_SOC_AQT1000), m)

	AQT1000_CDC_OBJS += aqt1000-regmap.o

	AQT1000_CDC_OBJS += aqt1000-utils.o

	AQT1000_CDC_OBJS += aqt1000-core.o

	AQT1000_CDC_OBJS += aqt1000-irq.o

	AQT1000_CDC_OBJS += aqt1000-clsh.o

	AQT1000_CDC_OBJS += aqt1000.o

	AQT1000_CDC_OBJS += aqt1000-mbhc.o

endif

LINUX_INC +=	-Iinclude/linux

INCS :=	$(COMMON_INC) \

	$(UAPI_INC)

EXTRA_CFLAGS += $(INCS)

CDEFINES +=	-DANI_LITTLE_BYTE_ENDIAN \

		-DANI_LITTLE_BIT_ENDIAN \

		-DDOT11F_LITTLE_ENDIAN_HOST \

		-DANI_COMPILER_TYPE_GCC \

		-DANI_OS_TYPE_ANDROID=6 \

		-DPTT_SOCK_SVC_ENABLE \

		-Wall\

		-Werror\

		-D__linux__

KBUILD_CPPFLAGS += $(CDEFINES)

# Currently, for versions of gcc which support it, the kernel Makefile

# is disabling the maybe-uninitialized warning.  Re-enable it for the

# AUDIO driver.  Note that we must use EXTRA_CFLAGS here so that it

# will override the kernel settings.

ifeq ($(call cc-option-yn, -Wmaybe-uninitialized),y)

EXTRA_CFLAGS += -Wmaybe-uninitialized

endif

#EXTRA_CFLAGS += -Wmissing-prototypes

ifeq ($(call cc-option-yn, -Wheader-guard),y)

EXTRA_CFLAGS += -Wheader-guard

endif

ifeq ($(KERNEL_BUILD), 0)

KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/ipc/Module.symvers

KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/dsp/Module.symvers

KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/Module.symvers

KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/Module.symvers

KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/soc/Module.symvers

KBUILD_EXTRA_SYMBOLS +=$(OUT)/obj/vendor/qcom/opensource/audio-kernel/asoc/codecs/aqt1000/Module.symvers

endif

# Module information used by KBuild framework

obj-$(CONFIG_SND_SOC_AQT1000) += aqt1000_cdc_dlkm.o

aqt1000_cdc_dlkm-y := $(AQT1000_CDC_OBJS)

# inject some build related information

DEFINES += -DBUILD_TIMESTAMP=\"$(shell date -u +'%Y-%m-%dT%H:%M:%SZ')\"

CONFIG_SND_SOC_MSM_STUB=m

CONFIG_MSM_AVTIMER=m

CONFIG_SND_SOC_MSM_HDMI_CODEC_RX=m

CONFIG_SND_SOC_AQT1000=m

#define CONFIG_SND_SOC_MSM_STUB 1

#define CONFIG_MSM_AVTIMER 1

#define CONFIG_SND_SOC_MSM_HDMI_CODEC_RX 1

#define CONFIG_SND_SOC_AQT1000 1