Loading bindings/power/supply/qcom/qpnp-qg.txt +15 −0 Original line number Diff line number Diff line Loading @@ -342,6 +342,21 @@ First Level Node - QGAUGE device Value type: <bool> Definition: Boolean property to use S7 for PON OCV. - qcom,min-sleep-time-secs Usage: optional Value type: <u32> Definition: The minimum sleep time in secs to allow a SOC jump if there has been a GOOD_OCV. - qcom,qg-sys-min-voltage Usage: optional Value type: <u32> Definition: The voltage threshold (in mV) which describes the system minimum voltage as per the hardware recommendation. This is not used for any configuration but only for calculating the available power. If this property is not specified, then the default value used is 2800 mV. ========================================================== Second Level Nodes - Peripherals managed by QGAUGE driver ========================================================== Loading Loading
bindings/power/supply/qcom/qpnp-qg.txt +15 −0 Original line number Diff line number Diff line Loading @@ -342,6 +342,21 @@ First Level Node - QGAUGE device Value type: <bool> Definition: Boolean property to use S7 for PON OCV. - qcom,min-sleep-time-secs Usage: optional Value type: <u32> Definition: The minimum sleep time in secs to allow a SOC jump if there has been a GOOD_OCV. - qcom,qg-sys-min-voltage Usage: optional Value type: <u32> Definition: The voltage threshold (in mV) which describes the system minimum voltage as per the hardware recommendation. This is not used for any configuration but only for calculating the available power. If this property is not specified, then the default value used is 2800 mV. ========================================================== Second Level Nodes - Peripherals managed by QGAUGE driver ========================================================== Loading
