Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 0894910c authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev 

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: adjust libata to ignore errors after spinup
  ata_piix: add TECRA M7 to broken suspend list
  pata_hpt{37x|3x2n}: fix clock reporting (take 2)
  pata_hpt37x: actually clock HPT374 with 50 MHz DPLL (take 2)
  pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
  ata_piix: update map 10b for ich8m
  sata_mv: PCI IDs for Hightpoint RocketRaid 1740/1742
  [libata] pata_isapnp: replace missing module device table
parents b2d597cb fb0582f9

drivers/ata/ata_piix.c

+8 −1
Original line number Diff line number Diff line
@@ -436,7 +436,7 @@ static const struct piix_map_db ich8_map_db = { 
		/* PM   PS   SM   SS       MAP */

		{  P0,  P2,  P1,  P3 }, /* 00b (hardwired when in AHCI) */

		{  RV,  RV,  RV,  RV },

		{  IDE,  IDE,  NA,  NA }, /* 10b (IDE mode) */

		{  P0,  P2, IDE, IDE }, /* 10b (IDE mode) */

		{  RV,  RV,  RV,  RV },

	},

};
@@ -900,6 +900,13 @@ static int piix_broken_suspend(void) 
				DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M5"),

			},

		},

		{

			.ident = "TECRA M7",

			.matches = {

				DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),

				DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M7"),

			},

		},

		{

			.ident = "Satellite U205",

			.matches = {

drivers/ata/libata-core.c

+1 −1
Original line number Diff line number Diff line
@@ -1723,7 +1723,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, 
		tf.protocol = ATA_PROT_NODATA;

		tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;

		err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);

		if (err_mask) {

		if (err_mask && id[2] != 0x738c) {

			rc = -EIO;

			reason = "SPINUP failed";

			goto err_out;

drivers/ata/pata_artop.c

+14 −5
Original line number Diff line number Diff line
@@ -2,6 +2,7 @@ 
 *    pata_artop.c - ARTOP ATA controller driver

 *

 *	(C) 2006 Red Hat <alan@redhat.com>

 *	(C) 2007 Bartlomiej Zolnierkiewicz

 *

 *    Based in part on drivers/ide/pci/aec62xx.c

 *	Copyright (C) 1999-2002	Andre Hedrick <andre@linux-ide.org>
@@ -28,7 +29,7 @@ 
#include <linux/ata.h>



#define DRV_NAME	"pata_artop"

#define DRV_VERSION	"0.4.3"

#define DRV_VERSION	"0.4.4"



/*

 *	The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -430,7 +431,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) 
		.udma_mask 	= ATA_UDMA4,

		.port_ops	= &artop6260_ops,

	};

	static const struct ata_port_info info_626x_fast = {

	static const struct ata_port_info info_628x = {

		.sht		= &artop_sht,

		.flags		= ATA_FLAG_SLAVE_POSS,

		.pio_mask	= 0x1f,	/* pio0-4 */
@@ -438,6 +439,14 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) 
		.udma_mask 	= ATA_UDMA5,

		.port_ops	= &artop6260_ops,

	};

	static const struct ata_port_info info_628x_fast = {

		.sht		= &artop_sht,

		.flags		= ATA_FLAG_SLAVE_POSS,

		.pio_mask	= 0x1f,	/* pio0-4 */

		.mwdma_mask	= 0x07, /* mwdma0-2 */

		.udma_mask 	= ATA_UDMA6,

		.port_ops	= &artop6260_ops,

	};

	const struct ata_port_info *ppi[] = { NULL, NULL };



	if (!printed_version++)
@@ -455,13 +464,13 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) 
	}

	else if (id->driver_data == 1)	/* 6260 */

		ppi[0] = &info_626x;

	else if (id->driver_data == 2)	{ /* 6260 or 6260 + fast */

	else if (id->driver_data == 2)	{ /* 6280 or 6280 + fast */

		unsigned long io = pci_resource_start(pdev, 4);

		u8 reg;



		ppi[0] = &info_626x;

		ppi[0] = &info_628x;

		if (inb(io) & 0x10)

			ppi[0] = &info_626x_fast;

			ppi[0] = &info_628x_fast;

		/* Mac systems come up with some registers not set as we

		   will need them */

drivers/ata/pata_hpt37x.c

+9 −11
Original line number Diff line number Diff line
@@ -8,12 +8,10 @@ 
 * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>

 * Portions Copyright (C) 2001	        Sun Microsystems, Inc.

 * Portions Copyright (C) 2003		Red Hat Inc

 * Portions Copyright (C) 2005-2006	MontaVista Software, Inc.

 * Portions Copyright (C) 2005-2007	MontaVista Software, Inc.

 *

 * TODO

 *	PLL mode

 *	Look into engine reset on timeout errors. Should not be

 *		required.

 *	Look into engine reset on timeout errors. Should not be	required.

 */



#include <linux/kernel.h>
@@ -26,7 +24,7 @@ 
#include <linux/libata.h>



#define DRV_NAME	"pata_hpt37x"

#define DRV_VERSION	"0.6.7"

#define DRV_VERSION	"0.6.9"



struct hpt_clock {

	u8	xfer_speed;
@@ -1092,9 +1090,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) 
		int dpll, adjust;



		/* Compute DPLL */

		dpll = 2;

		if (port->udma_mask & 0xE0)

			dpll = 3;

		dpll = (port->udma_mask & 0xC0) ? 3 : 2;



		f_low = (MHz[clock_slot] * 48) / MHz[dpll];

		f_high = f_low + 2;
@@ -1116,7 +1112,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) 
			pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100);

		}

		if (adjust == 8) {

			printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n");

			printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n");

			return -ENODEV;

		}

		if (dpll == 3)
@@ -1124,7 +1120,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) 
		else

			private_data = (void *)hpt37x_timings_50;



		printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[dpll]);

		printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n",

		       MHz[clock_slot], MHz[dpll]);

	} else {

		private_data = (void *)chip_table->clocks[clock_slot];

		/*
@@ -1137,7 +1134,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) 
			port = &info_hpt370_33;

		if (clock_slot < 2 && port == &info_hpt370a)

			port = &info_hpt370a_33;

		printk(KERN_INFO "hpt37x: %s: Bus clock %dMHz.\n", chip_table->name, MHz[clock_slot]);

		printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",

		       chip_table->name, MHz[clock_slot]);

	}



	/* Now kick off ATA set up */

drivers/ata/pata_hpt3x2n.c

+5 −3
Original line number Diff line number Diff line
@@ -8,7 +8,7 @@ 
 * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>

 * Portions Copyright (C) 2001	        Sun Microsystems, Inc.

 * Portions Copyright (C) 2003		Red Hat Inc

 * Portions Copyright (C) 2005-2006	MontaVista Software, Inc.

 * Portions Copyright (C) 2005-2007	MontaVista Software, Inc.

 *

 *

 * TODO
@@ -25,7 +25,7 @@ 
#include <linux/libata.h>



#define DRV_NAME	"pata_hpt3x2n"

#define DRV_VERSION	"0.3.3"

#define DRV_VERSION	"0.3.4"



enum {

	HPT_PCI_FAST	=	(1 << 31),
@@ -579,10 +579,12 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) 
		pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);

	}

	if (adjust == 8) {

		printk(KERN_WARNING "hpt3x2n: DPLL did not stabilize.\n");

		printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n");

		return -ENODEV;

	}



	printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n",

	       pci_mhz);

	/* Set our private data up. We only need a few flags so we use

	   it directly */

	port.private_data = NULL;