SPEAr13xx: Add dts and dtsi files (07658d9a) · Commits · e / devices / android_kernel_fairphone_FP4

arch/arm/boot/dts/spear1310-evb.dts

0 → 100644

+292 −0

Original line number	Diff line number	Diff line
		/*
		* DTS file for SPEAr1310 Evaluation Baord
		*
		* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
		*
		* The code contained herein is licensed under the GNU General Public
		* License. You may obtain a copy of the GNU General Public License
		* Version 2 or later at the following locations:
		*
		* http://www.opensource.org/licenses/gpl-license.html
		* http://www.gnu.org/copyleft/gpl.html
		*/

		/dts-v1/;
		/include/ "spear1310.dtsi"

		/ {
		model = "ST SPEAr1310 Evaluation Board";
		compatible = "st,spear1310-evb", "st,spear1310";
		#address-cells = <1>;
		#size-cells = <1>;

		memory {
		reg = <0 0x40000000>;
		};

		ahb {
		pinmux@e0700000 {
		pinctrl-names = "default";
		pinctrl-0 = <&state_default>;

		state_default: pinmux {
		i2c0-pmx {
		st,pins = "i2c0_grp";
		st,function = "i2c0";
		};
		i2s1 {
		st,pins = "i2s1_grp";
		st,function = "i2s1";
		};
		gpio {
		st,pins = "arm_gpio_grp";
		st,function = "arm_gpio";
		};
		eth {
		st,pins = "gmii_grp";
		st,function = "gmii";
		};
		ssp0 {
		st,pins = "ssp0_grp";
		st,function = "ssp0";
		};
		kbd {
		st,pins = "keyboard_6x6_grp";
		st,function = "keyboard";
		};
		sdhci {
		st,pins = "sdhci_grp";
		st,function = "sdhci";
		};
		smi-pmx {
		st,pins = "smi_2_chips_grp";
		st,function = "smi";
		};
		uart0 {
		st,pins = "uart0_grp";
		st,function = "uart0";
		};
		rs485 {
		st,pins = "rs485_0_1_tdm_0_1_grp";
		st,function = "rs485_0_1_tdm_0_1";
		};
		i2c1_2 {
		st,pins = "i2c_1_2_grp";
		st,function = "i2c_1_2";
		};
		pci {
		st,pins = "pcie0_grp","pcie1_grp",
		"pcie2_grp";
		st,function = "pci";
		};
		smii {
		st,pins = "smii_0_1_2_grp";
		st,function = "smii_0_1_2";
		};
		nand {
		st,pins = "nand_8bit_grp",
		"nand_16bit_grp";
		st,function = "nand";
		};
		};
		};

		ahci@b1000000 {
		status = "okay";
		};

		cf@b2800000 {
		status = "okay";
		};

		dma@ea800000 {
		status = "okay";
		};

		dma@eb000000 {
		status = "okay";
		};

		fsmc: flash@b0000000 {
		status = "okay";
		};

		gmac0: eth@e2000000 {
		status = "okay";
		};

		sdhci@b3000000 {
		status = "okay";
		};

		smi: flash@ea000000 {
		status = "okay";
		clock-rate=<50000000>;

		flash@e6000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0xe6000000 0x800000>;
		st,smi-fast-mode;

		partition@0 {
		label = "xloader";
		reg = <0x0 0x10000>;
		};
		partition@10000 {
		label = "u-boot";
		reg = <0x10000 0x40000>;
		};
		partition@50000 {
		label = "linux";
		reg = <0x50000 0x2c0000>;
		};
		partition@310000 {
		label = "rootfs";
		reg = <0x310000 0x4f0000>;
		};
		};
		};

		spi0: spi@e0100000 {
		status = "okay";
		};

		ehci@e4800000 {
		status = "okay";
		};

		ehci@e5800000 {
		status = "okay";
		};

		ohci@e4000000 {
		status = "okay";
		};

		ohci@e5000000 {
		status = "okay";
		};

		apb {
		adc@e0080000 {
		status = "okay";
		};

		gpio0: gpio@e0600000 {
		status = "okay";
		};

		gpio1: gpio@e0680000 {
		status = "okay";
		};

		i2c0: i2c@e0280000 {
		status = "okay";
		};

		i2c1: i2c@5cd00000 {
		status = "okay";
		};

		kbd@e0300000 {
		linux,keymap = < 0x00000001
		0x00010002
		0x00020003
		0x00030004
		0x00040005
		0x00050006
		0x00060007
		0x00070008
		0x00080009
		0x0100000a
		0x0101000c
		0x0102000d
		0x0103000e
		0x0104000f
		0x01050010
		0x01060011
		0x01070012
		0x01080013
		0x02000014
		0x02010015
		0x02020016
		0x02030017
		0x02040018
		0x02050019
		0x0206001a
		0x0207001b
		0x0208001c
		0x0300001d
		0x0301001e
		0x0302001f
		0x03030020
		0x03040021
		0x03050022
		0x03060023
		0x03070024
		0x03080025
		0x04000026
		0x04010027
		0x04020028
		0x04030029
		0x0404002a
		0x0405002b
		0x0406002c
		0x0407002d
		0x0408002e
		0x0500002f
		0x05010030
		0x05020031
		0x05030032
		0x05040033
		0x05050034
		0x05060035
		0x05070036
		0x05080037
		0x06000038
		0x06010039
		0x0602003a
		0x0603003b
		0x0604003c
		0x0605003d
		0x0606003e
		0x0607003f
		0x06080040
		0x07000041
		0x07010042
		0x07020043
		0x07030044
		0x07040045
		0x07050046
		0x07060047
		0x07070048
		0x07080049
		0x0800004a
		0x0801004b
		0x0802004c
		0x0803004d
		0x0804004e
		0x0805004f
		0x08060050
		0x08070051
		0x08080052 >;
		autorepeat;
		st,mode = <0>;
		status = "okay";
		};

		rtc@e0580000 {
		status = "okay";
		};

		serial@e0000000 {
		status = "okay";
		};

		wdt@ec800620 {
		status = "okay";
		};
		};
		};
		};

arch/arm/boot/dts/spear1310.dtsi

0 → 100644

+184 −0

Original line number	Diff line number	Diff line
		/*
		* DTS file for all SPEAr1310 SoCs
		*
		* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
		*
		* The code contained herein is licensed under the GNU General Public
		* License. You may obtain a copy of the GNU General Public License
		* Version 2 or later at the following locations:
		*
		* http://www.opensource.org/licenses/gpl-license.html
		* http://www.gnu.org/copyleft/gpl.html
		*/

		/include/ "spear13xx.dtsi"

		/ {
		compatible = "st,spear1310";

		ahb {
		ahci@b1000000 {
		compatible = "snps,spear-ahci";
		reg = <0xb1000000 0x10000>;
		interrupts = <0 68 0x4>;
		status = "disabled";
		};

		ahci@b1800000 {
		compatible = "snps,spear-ahci";
		reg = <0xb1800000 0x10000>;
		interrupts = <0 69 0x4>;
		status = "disabled";
		};

		ahci@b4000000 {
		compatible = "snps,spear-ahci";
		reg = <0xb4000000 0x10000>;
		interrupts = <0 70 0x4>;
		status = "disabled";
		};

		gmac1: eth@5c400000 {
		compatible = "st,spear600-gmac";
		reg = <0x5c400000 0x8000>;
		interrupts = <0 95 0x4>;
		interrupt-names = "macirq";
		status = "disabled";
		};

		gmac2: eth@5c500000 {
		compatible = "st,spear600-gmac";
		reg = <0x5c500000 0x8000>;
		interrupts = <0 96 0x4>;
		interrupt-names = "macirq";
		status = "disabled";
		};

		gmac3: eth@5c600000 {
		compatible = "st,spear600-gmac";
		reg = <0x5c600000 0x8000>;
		interrupts = <0 97 0x4>;
		interrupt-names = "macirq";
		status = "disabled";
		};

		gmac4: eth@5c700000 {
		compatible = "st,spear600-gmac";
		reg = <0x5c700000 0x8000>;
		interrupts = <0 98 0x4>;
		interrupt-names = "macirq";
		status = "disabled";
		};

		spi1: spi@5d400000 {
		compatible = "arm,pl022", "arm,primecell";
		reg = <0x5d400000 0x1000>;
		interrupts = <0 99 0x4>;
		status = "disabled";
		};

		apb {
		i2c1: i2c@5cd00000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "snps,designware-i2c";
		reg = <0x5cd00000 0x1000>;
		interrupts = <0 87 0x4>;
		status = "disabled";
		};

		i2c2: i2c@5ce00000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "snps,designware-i2c";
		reg = <0x5ce00000 0x1000>;
		interrupts = <0 88 0x4>;
		status = "disabled";
		};

		i2c3: i2c@5cf00000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "snps,designware-i2c";
		reg = <0x5cf00000 0x1000>;
		interrupts = <0 89 0x4>;
		status = "disabled";
		};

		i2c4: i2c@5d000000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "snps,designware-i2c";
		reg = <0x5d000000 0x1000>;
		interrupts = <0 90 0x4>;
		status = "disabled";
		};

		i2c5: i2c@5d100000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "snps,designware-i2c";
		reg = <0x5d100000 0x1000>;
		interrupts = <0 91 0x4>;
		status = "disabled";
		};

		i2c6: i2c@5d200000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "snps,designware-i2c";
		reg = <0x5d200000 0x1000>;
		interrupts = <0 92 0x4>;
		status = "disabled";
		};

		i2c7: i2c@5d300000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "snps,designware-i2c";
		reg = <0x5d300000 0x1000>;
		interrupts = <0 93 0x4>;
		status = "disabled";
		};

		serial@5c800000 {
		compatible = "arm,pl011", "arm,primecell";
		reg = <0x5c800000 0x1000>;
		interrupts = <0 82 0x4>;
		status = "disabled";
		};

		serial@5c900000 {
		compatible = "arm,pl011", "arm,primecell";
		reg = <0x5c900000 0x1000>;
		interrupts = <0 83 0x4>;
		status = "disabled";
		};

		serial@5ca00000 {
		compatible = "arm,pl011", "arm,primecell";
		reg = <0x5ca00000 0x1000>;
		interrupts = <0 84 0x4>;
		status = "disabled";
		};

		serial@5cb00000 {
		compatible = "arm,pl011", "arm,primecell";
		reg = <0x5cb00000 0x1000>;
		interrupts = <0 85 0x4>;
		status = "disabled";
		};

		serial@5cc00000 {
		compatible = "arm,pl011", "arm,primecell";
		reg = <0x5cc00000 0x1000>;
		interrupts = <0 86 0x4>;
		status = "disabled";
		};

		thermal@e07008c4 {
		st,thermal-flags = <0x7000>;
		};
		};
		};
		};

arch/arm/boot/dts/spear1340-evb.dts

0 → 100644

+308 −0

Original line number	Diff line number	Diff line
		/*
		* DTS file for SPEAr1340 Evaluation Baord
		*
		* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
		*
		* The code contained herein is licensed under the GNU General Public
		* License. You may obtain a copy of the GNU General Public License
		* Version 2 or later at the following locations:
		*
		* http://www.opensource.org/licenses/gpl-license.html
		* http://www.gnu.org/copyleft/gpl.html
		*/

		/dts-v1/;
		/include/ "spear1340.dtsi"

		/ {
		model = "ST SPEAr1340 Evaluation Board";
		compatible = "st,spear1340-evb", "st,spear1340";
		#address-cells = <1>;
		#size-cells = <1>;

		memory {
		reg = <0 0x40000000>;
		};

		ahb {
		pinmux@e0700000 {
		pinctrl-names = "default";
		pinctrl-0 = <&state_default>;

		state_default: pinmux {
		pads_as_gpio {
		st,pins = "pads_as_gpio_grp";
		st,function = "pads_as_gpio";
		};
		fsmc {
		st,pins = "fsmc_8bit_grp";
		st,function = "fsmc";
		};
		kbd {
		st,pins = "keyboard_row_col_grp",
		"keyboard_col5_grp";
		st,function = "keyboard";
		};
		uart0 {
		st,pins = "uart0_grp", "uart0_enh_grp";
		st,function = "uart0";
		};
		i2c0-pmx {
		st,pins = "i2c0_grp";
		st,function = "i2c0";
		};
		i2c1-pmx {
		st,pins = "i2c1_grp";
		st,function = "i2c1";
		};
		spdif-in {
		st,pins = "spdif_in_grp";
		st,function = "spdif_in";
		};
		spdif-out {
		st,pins = "spdif_out_grp";
		st,function = "spdif_out";
		};
		ssp0 {
		st,pins = "ssp0_grp", "ssp0_cs1_grp",
		"ssp0_cs3_grp";
		st,function = "ssp0";
		};
		pwm {
		st,pins = "pwm2_grp", "pwm3_grp";
		st,function = "pwm";
		};
		smi-pmx {
		st,pins = "smi_grp";
		st,function = "smi";
		};
		i2s {
		st,pins = "i2s_in_grp", "i2s_out_grp";
		st,function = "i2s";
		};
		gmac {
		st,pins = "gmii_grp", "rgmii_grp";
		st,function = "gmac";
		};
		cam3 {
		st,pins = "cam3_grp";
		st,function = "cam3";
		};
		cec0 {
		st,pins = "cec0_grp";
		st,function = "cec0";
		};
		cec1 {
		st,pins = "cec1_grp";
		st,function = "cec1";
		};
		sdhci {
		st,pins = "sdhci_grp";
		st,function = "sdhci";
		};
		clcd {
		st,pins = "clcd_grp";
		st,function = "clcd";
		};
		sata {
		st,pins = "sata_grp";
		st,function = "sata";
		};
		};
		};

		dma@ea800000 {
		status = "okay";
		};

		dma@eb000000 {
		status = "okay";
		};

		fsmc: flash@b0000000 {
		status = "okay";
		};

		gmac0: eth@e2000000 {
		status = "okay";
		};

		sdhci@b3000000 {
		status = "okay";
		};

		smi: flash@ea000000 {
		status = "okay";
		clock-rate=<50000000>;

		flash@e6000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0xe6000000 0x800000>;
		st,smi-fast-mode;

		partition@0 {
		label = "xloader";
		reg = <0x0 0x10000>;
		};
		partition@10000 {
		label = "u-boot";
		reg = <0x10000 0x40000>;
		};
		partition@50000 {
		label = "linux";
		reg = <0x50000 0x2c0000>;
		};
		partition@310000 {
		label = "rootfs";
		reg = <0x310000 0x4f0000>;
		};
		};
		};

		spi0: spi@e0100000 {
		status = "okay";
		};

		ehci@e4800000 {
		status = "okay";
		};

		ehci@e5800000 {
		status = "okay";
		};

		ohci@e4000000 {
		status = "okay";
		};

		ohci@e5000000 {
		status = "okay";
		};

		apb {
		adc@e0080000 {
		status = "okay";
		};

		gpio0: gpio@e0600000 {
		status = "okay";
		};

		gpio1: gpio@e0680000 {
		status = "okay";
		};

		i2c0: i2c@e0280000 {
		status = "okay";
		};

		i2c1: i2c@b4000000 {
		status = "okay";
		};

		kbd@e0300000 {
		linux,keymap = < 0x00000001
		0x00010002
		0x00020003
		0x00030004
		0x00040005
		0x00050006
		0x00060007
		0x00070008
		0x00080009
		0x0100000a
		0x0101000c
		0x0102000d
		0x0103000e
		0x0104000f
		0x01050010
		0x01060011
		0x01070012
		0x01080013
		0x02000014
		0x02010015
		0x02020016
		0x02030017
		0x02040018
		0x02050019
		0x0206001a
		0x0207001b
		0x0208001c
		0x0300001d
		0x0301001e
		0x0302001f
		0x03030020
		0x03040021
		0x03050022
		0x03060023
		0x03070024
		0x03080025
		0x04000026
		0x04010027
		0x04020028
		0x04030029
		0x0404002a
		0x0405002b
		0x0406002c
		0x0407002d
		0x0408002e
		0x0500002f
		0x05010030
		0x05020031
		0x05030032
		0x05040033
		0x05050034
		0x05060035
		0x05070036
		0x05080037
		0x06000038
		0x06010039
		0x0602003a
		0x0603003b
		0x0604003c
		0x0605003d
		0x0606003e
		0x0607003f
		0x06080040
		0x07000041
		0x07010042
		0x07020043
		0x07030044
		0x07040045
		0x07050046
		0x07060047
		0x07070048
		0x07080049
		0x0800004a
		0x0801004b
		0x0802004c
		0x0803004d
		0x0804004e
		0x0805004f
		0x08060050
		0x08070051
		0x08080052 >;
		autorepeat;
		st,mode = <0>;
		status = "okay";
		};

		rtc@e0580000 {
		status = "okay";
		};

		serial@e0000000 {
		status = "okay";
		};

		serial@b4100000 {
		status = "okay";
		};

		wdt@ec800620 {
		status = "okay";
		};
		};
		};
		};

arch/arm/boot/dts/spear1340.dtsi

0 → 100644

+56 −0

Original line number	Diff line number	Diff line
		/*
		* DTS file for all SPEAr1340 SoCs
		*
		* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
		*
		* The code contained herein is licensed under the GNU General Public
		* License. You may obtain a copy of the GNU General Public License
		* Version 2 or later at the following locations:
		*
		* http://www.opensource.org/licenses/gpl-license.html
		* http://www.gnu.org/copyleft/gpl.html
		*/

		/include/ "spear13xx.dtsi"

		/ {
		compatible = "st,spear1340";

		ahb {
		ahci@b1000000 {
		compatible = "snps,spear-ahci";
		reg = <0xb1000000 0x10000>;
		interrupts = <0 72 0x4>;
		status = "disabled";
		};

		spi1: spi@5d400000 {
		compatible = "arm,pl022", "arm,primecell";
		reg = <0x5d400000 0x1000>;
		interrupts = <0 99 0x4>;
		status = "disabled";
		};

		apb {
		i2c1: i2c@b4000000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "snps,designware-i2c";
		reg = <0xb4000000 0x1000>;
		interrupts = <0 104 0x4>;
		status = "disabled";
		};

		serial@b4100000 {
		compatible = "arm,pl011", "arm,primecell";
		reg = <0xb4100000 0x1000>;
		interrupts = <0 105 0x4>;
		status = "disabled";
		};

		thermal@e07008c4 {
		st,thermal-flags = <0x2a00>;
		};
		};
		};
		};

arch/arm/boot/dts/spear13xx.dtsi

0 → 100644

+262 −0

Original line number	Diff line number	Diff line
		/*
		* DTS file for all SPEAr13xx SoCs
		*
		* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
		*
		* The code contained herein is licensed under the GNU General Public
		* License. You may obtain a copy of the GNU General Public License
		* Version 2 or later at the following locations:
		*
		* http://www.opensource.org/licenses/gpl-license.html
		* http://www.gnu.org/copyleft/gpl.html
		*/

		/include/ "skeleton.dtsi"

		/ {
		interrupt-parent = <&gic>;

		cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
		compatible = "arm,cortex-a9";
		reg = <0>;
		next-level-cache = <&L2>;
		};

		cpu@1 {
		compatible = "arm,cortex-a9";
		reg = <1>;
		next-level-cache = <&L2>;
		};
		};

		gic: interrupt-controller@ec801000 {
		compatible = "arm,cortex-a9-gic";
		interrupt-controller;
		#interrupt-cells = <3>;
		reg = < 0xec801000 0x1000 >,
		< 0xec800100 0x0100 >;
		};

		pmu {
		compatible = "arm,cortex-a9-pmu";
		interrupts = <0 8 0x04
		0 9 0x04>;
		};

		L2: l2-cache {
		compatible = "arm,pl310-cache";
		reg = <0xed000000 0x1000>;
		cache-unified;
		cache-level = <2>;
		};

		memory {
		name = "memory";
		device_type = "memory";
		reg = <0 0x40000000>;
		};

		chosen {
		bootargs = "console=ttyAMA0,115200";
		};

		ahb {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		ranges = <0x50000000 0x50000000 0x10000000
		0xb0000000 0xb0000000 0x10000000
		0xe0000000 0xe0000000 0x10000000>;

		sdhci@b3000000 {
		compatible = "st,sdhci-spear";
		reg = <0xb3000000 0x100>;
		interrupts = <0 28 0x4>;
		status = "disabled";
		};

		cf@b2800000 {
		compatible = "arasan,cf-spear1340";
		reg = <0xb2800000 0x100>;
		interrupts = <0 29 0x4>;
		status = "disabled";
		};

		dma@ea800000 {
		compatible = "snps,dma-spear1340";
		reg = <0xea800000 0x1000>;
		interrupts = <0 19 0x4>;
		status = "disabled";
		};

		dma@eb000000 {
		compatible = "snps,dma-spear1340";
		reg = <0xeb000000 0x1000>;
		interrupts = <0 59 0x4>;
		status = "disabled";
		};

		fsmc: flash@b0000000 {
		compatible = "st,spear600-fsmc-nand";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0xb0000000 0x1000 /* FSMC Register */
		0xb0800000 0x0010>; /* NAND Base */
		reg-names = "fsmc_regs", "nand_data";
		interrupts = <0 20 0x4
		0 21 0x4
		0 22 0x4
		0 23 0x4>;
		st,ale-off = <0x20000>;
		st,cle-off = <0x10000>;
		status = "disabled";
		};

		gmac0: eth@e2000000 {
		compatible = "st,spear600-gmac";
		reg = <0xe2000000 0x8000>;
		interrupts = <0 23 0x4
		0 24 0x4>;
		interrupt-names = "macirq", "eth_wake_irq";
		status = "disabled";
		};

		smi: flash@ea000000 {
		compatible = "st,spear600-smi";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0xea000000 0x1000>;
		interrupts = <0 30 0x4>;
		status = "disabled";
		};

		spi0: spi@e0100000 {
		compatible = "arm,pl022", "arm,primecell";
		reg = <0xe0100000 0x1000>;
		interrupts = <0 31 0x4>;
		status = "disabled";
		};

		ehci@e4800000 {
		compatible = "st,spear600-ehci", "usb-ehci";
		reg = <0xe4800000 0x1000>;
		interrupts = <0 64 0x4>;
		status = "disabled";
		};

		ehci@e5800000 {
		compatible = "st,spear600-ehci", "usb-ehci";
		reg = <0xe5800000 0x1000>;
		interrupts = <0 66 0x4>;
		status = "disabled";
		};

		ohci@e4000000 {
		compatible = "st,spear600-ohci", "usb-ohci";
		reg = <0xe4000000 0x1000>;
		interrupts = <0 65 0x4>;
		status = "disabled";
		};

		ohci@e5000000 {
		compatible = "st,spear600-ohci", "usb-ohci";
		reg = <0xe5000000 0x1000>;
		interrupts = <0 67 0x4>;
		status = "disabled";
		};

		apb {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		ranges = <0x50000000 0x50000000 0x10000000
		0xb0000000 0xb0000000 0x10000000
		0xe0000000 0xe0000000 0x10000000>;

		gpio0: gpio@e0600000 {
		compatible = "arm,pl061", "arm,primecell";
		reg = <0xe0600000 0x1000>;
		interrupts = <0 24 0x4>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
		status = "disabled";
		};

		gpio1: gpio@e0680000 {
		compatible = "arm,pl061", "arm,primecell";
		reg = <0xe0680000 0x1000>;
		interrupts = <0 25 0x4>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
		status = "disabled";
		};

		kbd@e0300000 {
		compatible = "st,spear300-kbd";
		reg = <0xe0300000 0x1000>;
		status = "disabled";
		};

		i2c0: i2c@e0280000 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "snps,designware-i2c";
		reg = <0xe0280000 0x1000>;
		interrupts = <0 41 0x4>;
		status = "disabled";
		};

		rtc@e0580000 {
		compatible = "st,spear-rtc";
		reg = <0xe0580000 0x1000>;
		interrupts = <0 36 0x4>;
		status = "disabled";
		};

		serial@e0000000 {
		compatible = "arm,pl011", "arm,primecell";
		reg = <0xe0000000 0x1000>;
		interrupts = <0 36 0x4>;
		status = "disabled";
		};

		adc@e0080000 {
		compatible = "st,spear600-adc";
		reg = <0xe0080000 0x1000>;
		interrupts = <0 44 0x4>;
		status = "disabled";
		};

		timer@e0380000 {
		compatible = "st,spear-timer";
		reg = <0xe0380000 0x400>;
		interrupts = <0 37 0x4>;
		};

		timer@ec800600 {
		compatible = "arm,cortex-a9-twd-timer";
		reg = <0xec800600 0x20>;
		interrupts = <1 13 0x301>;
		};

		wdt@ec800620 {
		compatible = "arm,cortex-a9-twd-wdt";
		reg = <0xec800620 0x20>;
		status = "disabled";
		};

		thermal@e07008c4 {
		compatible = "st,thermal-spear1340";
		reg = <0xe07008c4 0x4>;
		};
		};
		};
		};