Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 03b32e4c authored by John Youn's avatar John Youn Committed by Felipe Balbi
Browse files

Revert "usb: dwc2: Move reset into dwc2_get_hwparams()" 



This reverts commit 263b7fb5 ("usb: dwc2: Move reset into
dwc2_get_hwparams()") due to regression found on bcm2835 platform. USB
ethernet fails, due to being unable to pick up proper parameters when
performing a plain reset before reading hw params.

Below shows the results of the gnptxfsiz and hptxfsiz with and before
and after reverting this (from Stefan Wahren):

So here is the probe result before Patch 1 is applied:

[    1.283148] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host
[    1.313894] dwc2 20980000.usb: gnptxfsiz=00201000
[    1.314104] dwc2 20980000.usb: hptxfsiz=00000000
[    1.353908] dwc2 20980000.usb: 256 invalid for host_nperio_tx_fifo_size. Check HW configuration.
[    1.354262] dwc2 20980000.usb: 512 invalid for host_perio_tx_fifo_size. Check HW configuration.
[    1.394249] dwc2 20980000.usb: DWC OTG Controller
[    1.394561] dwc2 20980000.usb: new USB bus registered, assigned bus number 1
[    1.394917] dwc2 20980000.usb: irq 33, io mem 0x00000000

And here is the probe result after Patch 1 is applied:

[    1.280107] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host
[    1.353949] dwc2 20980000.usb: gnptxfsiz=01001000
[    1.354166] dwc2 20980000.usb: hptxfsiz=02002000
[    1.434301] dwc2 20980000.usb: DWC OTG Controller
[    1.434616] dwc2 20980000.usb: new USB bus registered, assigned bus number 1
[    1.434973] dwc2 20980000.usb: irq 33, io mem 0x00000000

Tested-by: default avatarHeiko Stuebner <heiko@sntech.de>
Tested-by: default avatarDouglas Anderson <dianders@chromium.org>
Signed-off-by: default avatarJohn Youn <johnyoun@synopsys.com>
Reported-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
Reported-by: default avatarRemi Pommarel <repk@triplefau.lt>
Tested-by: default avatarStefan Wahren <stefan.wahren@i2se.com>
Tested-by: default avatarRemi Pommarel <repk@triplefau.lt>
Signed-off-by: default avatarFelipe Balbi <balbi@kernel.org>
parent 79c5623f

drivers/usb/dwc2/core.c

+0 −8
Original line number Diff line number Diff line
@@ -3278,9 +3278,6 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg) 
/**

 * During device initialization, read various hardware configuration

 * registers and interpret the contents.

 *

 * This should be called during driver probe. It will perform a core

 * soft reset in order to get the reset values of the parameters.

 */

int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)

{
@@ -3288,7 +3285,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) 
	unsigned width;

	u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;

	u32 grxfsiz;

	int retval;



	/*

	 * Attempt to ensure this device is really a DWC_otg Controller.
@@ -3308,10 +3304,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) 
		hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,

		hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);



	retval = dwc2_core_reset(hsotg);

	if (retval)

		return retval;



	hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1);

	hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);

	hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3);

drivers/usb/dwc2/platform.c

+7 −1
Original line number Diff line number Diff line
@@ -530,7 +530,13 @@ static int dwc2_driver_probe(struct platform_device *dev) 
	if (retval)

		return retval;



	/* Reset the controller and detect hardware config values */

	/*

	 * Reset before dwc2_get_hwparams() then it could get power-on real

	 * reset value form registers.

	 */

	dwc2_core_reset_and_force_dr_mode(hsotg);



	/* Detect config values from hardware */

	retval = dwc2_get_hwparams(hsotg);

	if (retval)

		goto error;